dri-devel November 2012

dri-devel@lists.freedesktop.org

126 participants
797 discussions

[PATCH] drm: tegra: Use framebuffer pitch as line stride
by Thierry Reding 04 Dec '12

04 Dec '12

Instead of using the stride derived from the display mode, use the pitch associated with the currently active framebuffer. This fixes a bug where the LCD display content would be skewed when enabling HDMI with a video mode different from that of the LCD. Signed-off-by: Thierry Reding <thierry.reding(a)avionic-design.de> --- drivers/gpu/drm/tegra/dc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 94686e5..41cde76 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -218,7 +218,7 @@ static int tegra_crtc_mode_set(struct drm_crtc *crtc, } bpp = crtc->fb->bits_per_pixel / 8; - win.stride = win.outw * bpp; + win.stride = crtc->fb->pitches[0]; /* program window registers */ value = tegra_dc_readl(dc, DC_CMD_DISPLAY_WINDOW_HEADER); -- 1.8.0

6 12

[PATCH] drm/radeon: use cached memory when evicting for vram on non agp
by j.glisse＠gmail.com 03 Dec '12

03 Dec '12

From: Jerome Glisse <jglisse(a)redhat.com> Force the use of cached memory when evicting from vram on non agp hardware. Also force write combine on agp hw. This is to insure the minimum cache type change when allocating memory and improving memory eviction especialy on pci/pcie hw. Signed-off-by: Jerome Glisse <jglisse(a)redhat.com> --- drivers/gpu/drm/radeon/radeon_object.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index b91118c..3f9f3bb 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -88,10 +88,20 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) if (domain & RADEON_GEM_DOMAIN_VRAM) rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM; - if (domain & RADEON_GEM_DOMAIN_GTT) - rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_TT; - if (domain & RADEON_GEM_DOMAIN_CPU) - rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM; + if (domain & RADEON_GEM_DOMAIN_GTT) { + if (rbo->rdev->flags & RADEON_IS_AGP) { + rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_TT; + } else { + rbo->placements[c++] = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_TT; + } + } + if (domain & RADEON_GEM_DOMAIN_CPU) { + if (rbo->rdev->flags & RADEON_IS_AGP) { + rbo->placements[c++] = TTM_PL_FLAG_WC | TTM_PL_FLAG_TT; + } else { + rbo->placements[c++] = TTM_PL_FLAG_CACHED | TTM_PL_FLAG_TT; + } + } if (!c) rbo->placements[c++] = TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM; rbo->placement.num_placement = c; -- 1.7.11.7

3 2

[Bug 40552] New: r200 crashes in glclear when running the wine d3d tests.
by bugzilla-daemon＠freedesktop.org 03 Dec '12

03 Dec '12

https://bugs.freedesktop.org/show_bug.cgi?id=40552 Summary: r200 crashes in glclear when running the wine d3d tests. Product: Mesa Version: git Platform: x86 (IA32) OS/Version: All Status: NEW Severity: normal Priority: medium Component: Drivers/DRI/r200 AssignedTo: dri-devel(a)lists.freedesktop.org ReportedBy: stefandoesinger(a)gmx.at Created an attachment (id=50813) --> (https://bugs.freedesktop.org/attachment.cgi?id=50813) last log lines, assertion and backtrace. When running the Wine(www.winehq.org) ddraw/d3d unit tests with r200 they crash due to a failing assertion. The clear is done on a texture attached to a framebuffer. It looks like Mesa is falling back to software, the SW renderer is trying to map the texture into memory and this triggers the assertion. I have not been able to reproduce this in a stand-alone application yet. I'll attach a backtrace and the failing assertion. I'll also file a bug report for the fact that r200 falls back to software at all, I think the hardware could do this clear just fine. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.

1 1

[Bug 35095] New: [r300g] More screen corruption in WoW with HyperZ enabled.
by bugzilla-daemon＠freedesktop.org 02 Dec '12

02 Dec '12

https://bugs.freedesktop.org/show_bug.cgi?id=35095 Summary: [r300g] More screen corruption in WoW with HyperZ enabled. Product: Mesa Version: git Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Drivers/Gallium/r300 AssignedTo: dri-devel(a)lists.freedesktop.org ReportedBy: rankincj(a)googlemail.com There is now a large horizontal swathe of corruption across the middle of the entire screen. This corruption vanishes as soon as I stop exporting RADEON_HYPERZ. This corruption appears with my M66GL (RV530 class) (but not with my RV350), and is very recent - probably since the most recent HyperZ patches. Basically, the corruption looks like lots of little tiles are missing from the picture. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.

1 18

[Bug 33648] New: Black line in Lightsmark with Z compression enabled (RV530)
by bugzilla-daemon＠freedesktop.org 02 Dec '12

02 Dec '12

https://bugs.freedesktop.org/show_bug.cgi?id=33648 Summary: Black line in Lightsmark with Z compression enabled (RV530) Product: Mesa Version: git Platform: Other URL: http://dee.cz/lightsmark/Lightsmark2008.2.0.tar.bz2 OS/Version: All Status: NEW Severity: minor Priority: medium Component: Drivers/Gallium/r300 AssignedTo: dri-devel(a)lists.freedesktop.org ReportedBy: drakkk(a)centrum.cz After recent zbuffer compression rework Lightsmark is the only remaining app I've tested which is still not working properly here on RV530. There is a thick black line across the screen in some scenes, particularly: "no radiosity","soft shadows", "penumbra shadows" and the last scene. Maybe this is a known issue and there are many open bugs about HyperZ, however according to db299a9f8244d53d9041fcdbd396a77ebe1f9e3e comment RV530 should just work. So I'm reporting it isn't. Also this is not a regression, it was much worse before and this is the only remaining issue here. To be sure this isn't HiZ issue I've changed line 367 in r300_chipset.c to "caps->hiz_ram = 0;" and it haven't changed anything. r300: AA compression: NO, Z compression: YES, HiZ: NO -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug.

1 9

[RFC v1] drm: add reference count of gem object name
by Inki Dae 01 Dec '12

01 Dec '12

Hello, all. This patch introduces reference count of gem object name and resolves the below issue. In case that proces A shares its own gem object with process B, process B opens a gem object name from process A to get its own gem handle. But if process A closes the gem handle, the gem object name to this is also released. So the gem object name that process B referring to becomes invalid. I'm not sure that this is issue or not but at least, gem object name IS NOT process-unique but IS gem object-unique. So I think the gem object name shared by process A should be preserved as long as the gem object has not been released. Below is simple example. at P1: 1. gem create => obj_refcount = 1 2. gem flink => obj_refcount = 2 (allocate obj_name) 5. gem close a. obj_refcount = 2 and release the obj_name b. obj_refcount = 1 once the obj_name release 3. and share it with P2 at P2: 4. gem open => obj_refcount = 3 6. the obj_name from P1 is invalid. 7. gem close => obj_refcount = 0(released) And with this patch, at P1: 1. gem create => obj_refcount = 1, name_refcount = 0 2. gem flink => obj_refcount = 2, name_refcount = 1 (allocate obj_name) 5. gem close => obj_refcount = 2, name_refcount = 1 3. and share it with P2 at P2: 4. gem open => obj_refcount = 3, name_refcount = 2 6. the gem object name from P1 is valid. 7. gem close a. obj_refcount = 1, name_refcount = 0(released) b. obj_refcount = 0(released) once name_ref_count = 0 There may be my missing point so please give me any advice. Thanks, Inki Dae Signed-off-by: Inki Dae <inki.dae(a)samsung.com> --- drivers/gpu/drm/drm_gem.c | 41 ++++++++++++++++++++++++++++++++++++++--- include/drm/drmP.h | 12 ++++++++++++ 2 files changed, 50 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 24efae4..16e4b75 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -145,6 +145,7 @@ int drm_gem_object_init(struct drm_device *dev, kref_init(&obj->refcount); atomic_set(&obj->handle_count, 0); + atomic_set(&obj->obj_name_count, 0); obj->size = size; return 0; @@ -166,6 +167,7 @@ int drm_gem_private_object_init(struct drm_device *dev, kref_init(&obj->refcount); atomic_set(&obj->handle_count, 0); + atomic_set(&obj->obj_name_count, 0); obj->size = size; return 0; @@ -452,6 +454,19 @@ drm_gem_flink_ioctl(struct drm_device *dev, void *data, return -ENOENT; again: + /* + * return current object name increasing reference count of + * this object name if exists already and not same process. + */ + if (obj->name) { + if (file_priv->pid != current->pid) + atomic_inc(&obj->obj_name_count); + + args->name = (uint64_t)obj->name; + drm_gem_object_unreference_unlocked(obj); + return 0; + } + if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) { ret = -ENOMEM; goto err; @@ -461,6 +476,7 @@ again: if (!obj->name) { ret = idr_get_new_above(&dev->object_name_idr, obj, 1, &obj->name); + atomic_set(&obj->obj_name_count, 1); args->name = (uint64_t) obj->name; spin_unlock(&dev->object_name_lock); @@ -502,8 +518,11 @@ drm_gem_open_ioctl(struct drm_device *dev, void *data, spin_lock(&dev->object_name_lock); obj = idr_find(&dev->object_name_idr, (int) args->name); - if (obj) + if (obj) { drm_gem_object_reference(obj); + if (file_priv->pid != current->pid) + atomic_inc(&obj->obj_name_count); + } spin_unlock(&dev->object_name_lock); if (!obj) return -ENOENT; @@ -612,9 +631,25 @@ void drm_gem_object_handle_free(struct drm_gem_object *obj) /* Remove any name for this object */ spin_lock(&dev->object_name_lock); if (obj->name) { - idr_remove(&dev->object_name_idr, obj->name); - obj->name = 0; + /* + * The name of this object could being referenced + * by another process so remove the name after checking + * the obj_name_count of this object. + */ + if (atomic_dec_and_test(&obj->obj_name_count)) { + idr_remove(&dev->object_name_idr, obj->name); + obj->name = 0; + } else { + /* + * this object name is being referenced by other yet + * so do not unreference this. + */ + spin_unlock(&dev->object_name_lock); + return; + } + spin_unlock(&dev->object_name_lock); + /* * The object name held a reference to this object, drop * that now. diff --git a/include/drm/drmP.h b/include/drm/drmP.h index fad21c9..27657b8 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -628,6 +628,18 @@ struct drm_gem_object { /** Handle count of this object. Each handle also holds a reference */ atomic_t handle_count; /* number of handles on this object */ + /* + * Name count of this object. + * + * This count is initialized as 0 with drm_gem_object_init or + * drm_gem_private_object_init call. After that, this count is + * increased if the name of this object exists already + * otherwise is set to 1 at flink. And finally, the name of + * this object will be released when this count reaches 0 + * by gem close. + */ + atomic_t obj_name_count; + /** Related drm device */ struct drm_device *dev; -- 1.7.4.1

3 8

[v3.7-rcx] drm/i915: *ERROR* Timed out waiting for forcewake old ack to clear
by Jörg Otte 01 Dec '12

01 Dec '12

At boot-up with newer kernels (at least v3.6.x, v3.7-rc) I always see following on the bootup-display: 3.7-rcx: [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear. 3.6.x: [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out It's an Ivy Bridge/64Bit Notebook. I know there is a patch at http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg14602.html but it doesn't apply to v3.7-rcx. This does not occur with the distro kernel (kubuntu, kernel 3.2.29). Jörg. Please CC me, I am not subsribed --- $ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4) $ lspci -vs 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Device 16c2 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915

2 2

WARNING: at drivers/gpu/drm/i915/intel_display.c:1009 ironlake_crtc_disable+0xaf/0x8e0
by Meelis Roos 01 Dec '12

01 Dec '12

I tried 3.7-rc5 on an ironlale PC and got the warning in subject. The computer last ran 3.6.0 without any warnings. Second reboot showed the same warning plus a couple of EDID warnings (also below). [ 0.000000] Linux version 3.7.0-rc5 (mroos@prometheus) (gcc version 4.7.2 (Debian 4.7.2-4) ) #70 SMP Mon Nov 12 18:20:25 EET 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db7ac43f] usable [ 0.000000] BIOS-e820: [mem 0x00000000db7ac440-0x00000000db7ae49f] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7ae4a0-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 2 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb7ac max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdb7abfff] [ 0.000000] [mem 0x00000000-0xdb5fffff] page 2M [ 0.000000] [mem 0xdb600000-0xdb7abfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xdb7abfff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff] [ 0.000000] [mem 0x100000000-0x117ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x117ffffff @ [mem 0xdb7aa000-0xdb7abfff] [ 0.000000] ACPI: RSDP 00000000000e5210 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 00000000db7d0540 00040 (v01 HPQOEM SLIC-BPC 20110714 00000000) [ 0.000000] ACPI: FACP 00000000db7d05e8 00074 (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20120913/tbfadt-598) [ 0.000000] ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20120913/tbfadt-648) [ 0.000000] ACPI: DSDT 00000000db7d0a4f 0A69E (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000db7d0500 00040 [ 0.000000] ACPI: APIC 00000000db7d065c 000BC (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: ASF! 00000000db7d0718 00063 (v32 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: MCFG 00000000db7d077b 0003C (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: TCPA 00000000db7d07b7 00032 (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: SLIC 00000000db7d07e9 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET 00000000db7d095f 00038 (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880113800000-ffff8801175fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x117ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdb7abfff] [ 0.000000] node 0: [mem 0x100000000-0x117ffffff] [ 0.000000] On node 0 totalpages: 997179 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 878572 pages, LIFO batch:31 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 96768 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000db7ac000 - 00000000db7ad000 [ 0.000000] PM: Registered nosave memory: 00000000db7ad000 - 00000000db7ae000 [ 0.000000] PM: Registered nosave memory: 00000000db7ae000 - 00000000db7af000 [ 0.000000] PM: Registered nosave memory: 00000000db7af000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed40000 [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000 [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000 [ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880117c00000 s74048 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s74048 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 979253 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3842432k/4587520k available (4385k kernel code, 598804k absent, 146284k reserved, 4154k data, 492k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3325.358 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6650.71 BogoMIPS (lpj=13301432) [ 0.000062] pid_max: default: 32768 minimum: 301 [ 0.000111] Mount-cache hash table entries: 256 [ 0.000264] CPU: Physical Processor ID: 0 [ 0.000291] CPU: Processor Core ID: 0 [ 0.000319] mce: CPU supports 9 MCE banks [ 0.000353] CPU0: Thermal monitoring enabled (TM1) [ 0.000385] process: using mwait in idle threads [ 0.000415] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.000415] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000415] tlb_flushall_shift: 6 [ 0.000565] Freeing SMP alternatives: 20k freed [ 0.000599] ACPI: Core revision 20120913 [ 0.004737] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044336] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05) [ 0.151286] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.151366] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.151406] ... version: 3 [ 0.151438] ... bit width: 48 [ 0.151470] ... generic registers: 4 [ 0.151502] ... value mask: 0000ffffffffffff [ 0.151538] ... max period: 000000007fffffff [ 0.151573] ... fixed-purpose events: 3 [ 0.151605] ... event mask: 000000070000000f [ 0.165018] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.151762] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.191397] Brought up 4 CPUs [ 0.191452] smpboot: Total of 4 processors activated (26602.86 BogoMIPS) [ 0.193278] PM: Registering ACPI NVS region [mem 0xdb7ac440-0xdb7ae49f] (8288 bytes) [ 0.193345] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots. [ 0.193447] NET: Registered protocol family 16 [ 0.193550] ACPI: bus type pci registered [ 0.193620] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.193684] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.196308] PCI: Using configuration type 1 for base access [ 0.196724] bio: create slab <bio-0> at 0 [ 0.196791] ACPI: Added _OSI(Module Device) [ 0.196825] ACPI: Added _OSI(Processor Device) [ 0.196858] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.196892] ACPI: Added _OSI(Processor Aggregator Device) [ 0.197445] ACPI: EC: Look up EC in DSDT [ 0.238080] ACPI: SSDT 00000000db7dc771 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.238307] ACPI: Dynamic OEM Table Load: [ 0.238348] ACPI: SSDT (null) 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.269977] ACPI: SSDT 00000000db7dc399 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E) [ 0.270190] ACPI: Dynamic OEM Table Load: [ 0.270231] ACPI: SSDT (null) 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E) [ 0.317970] ACPI: Interpreter enabled [ 0.318004] ACPI: (supports S0 S3 S4 S5) [ 0.318061] ACPI: Using IOAPIC for interrupt routing [ 0.335638] ACPI: No dock devices found. [ 0.335672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335880] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211) [ 0.335957] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536) [ 0.336046] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.336116] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359) [ 0.336194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.336406] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.336496] PCI host bridge to bus 0000:00 [ 0.337022] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.337058] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff] [ 0.337098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.337135] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff] [ 0.337174] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff] [ 0.337211] pci_bus 0000:00: root bus resource [io 0x7000-0xafff] [ 0.337249] pci_bus 0000:00: root bus resource [io 0xb000-0xffff] [ 0.337287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.337327] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff] [ 0.337367] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.337411] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.337424] DMAR: Disabling batched IOTLB flush on Ironlake [ 0.337473] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000 [ 0.337481] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.337485] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.337489] pci 0000:00:02.0: reg 20: [io 0x1170-0x1177] [ 0.337531] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.337556] pci 0000:00:16.0: reg 10: [mem 0xf0427100-0xf042710f 64bit] [ 0.337643] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.337663] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002 [ 0.337677] pci 0000:00:16.3: reg 10: [io 0x1188-0x118f] [ 0.337683] pci 0000:00:16.3: reg 14: [mem 0xf0424000-0xf0424fff] [ 0.337768] pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000 [ 0.337781] pci 0000:00:19.0: reg 10: [mem 0xf0400000-0xf041ffff] [ 0.337787] pci 0000:00:19.0: reg 14: [mem 0xf0425000-0xf0425fff] [ 0.337793] pci 0000:00:19.0: reg 18: [io 0x1100-0x111f] [ 0.337840] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.337859] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.337875] pci 0000:00:1a.0: reg 10: [mem 0xf0426800-0xf0426bff] [ 0.337947] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.337966] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.337978] pci 0000:00:1b.0: reg 10: [mem 0xf0420000-0xf0423fff 64bit] [ 0.338030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.338046] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.338098] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.338116] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.338168] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.338184] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.338236] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.338256] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.338272] pci 0000:00:1d.0: reg 10: [mem 0xf0426c00-0xf0426fff] [ 0.338343] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.338358] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.338405] pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100 [ 0.338507] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.338521] pci 0000:00:1f.2: reg 10: [io 0x1190-0x1197] [ 0.338526] pci 0000:00:1f.2: reg 14: [io 0x11a8-0x11ab] [ 0.338533] pci 0000:00:1f.2: reg 18: [io 0x1198-0x119f] [ 0.338539] pci 0000:00:1f.2: reg 1c: [io 0x11ac-0x11af] [ 0.338544] pci 0000:00:1f.2: reg 20: [io 0x1120-0x113f] [ 0.338550] pci 0000:00:1f.2: reg 24: [mem 0xf0426000-0xf04267ff] [ 0.338584] pci 0000:00:1f.2: PME# supported from D3hot [ 0.338625] pci 0000:00:1c.0: PCI bridge to [bus 18] [ 0.338693] pci 0000:00:1c.4: PCI bridge to [bus 24] [ 0.338763] pci 0000:00:1c.6: PCI bridge to [bus 30] [ 0.338847] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) [ 0.338891] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff] (subtractive decode) [ 0.338892] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.338894] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode) [ 0.338895] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode) [ 0.338896] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode) [ 0.338897] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode) [ 0.338898] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.338899] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode) [ 0.338901] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.338913] pci_bus 0000:00: on NUMA node 0 [ 0.338916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.339003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] [ 0.339028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT] [ 0.339050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX7._PRT] [ 0.339072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.339151] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211) [ 0.339227] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536) [ 0.339316] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359) [ 0.339395] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.339455] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.342593] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.342703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.342809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.342914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.343018] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.343123] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.343228] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.343332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.343476] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.343538] vgaarb: loaded [ 0.343567] vgaarb: bridge control possible 0000:00:02.0 [ 0.343631] SCSI subsystem initialized [ 0.343663] ACPI: bus type scsi registered [ 0.343714] libata version 3.00 loaded. [ 0.343729] PCI: Using ACPI for IRQ routing [ 0.344864] PCI: Discovered peer bus 3f [ 0.344896] PCI: root bus 3f: using default resources [ 0.344897] PCI: Probing PCI hardware (bus 3f) [ 0.344910] PCI host bridge to bus 0000:3f [ 0.344944] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.344982] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.345021] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.345085] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000 [ 0.345098] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000 [ 0.345111] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000 [ 0.345123] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000 [ 0.345135] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000 [ 0.345147] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000 [ 0.345165] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.345227] PCI: pci_cache_line_size set to 64 bytes [ 0.345259] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.345260] e820: reserve RAM buffer [mem 0xdb7ac440-0xdbffffff] [ 0.345321] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.345396] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.347436] Switching to clocksource hpet [ 0.347499] pnp: PnP ACPI init [ 0.347534] ACPI: bus type pnp registered [ 0.347665] pnp 00:00: [mem 0xf8000000-0xfdffffff window] [ 0.347667] pnp 00:00: [bus 00-ff] [ 0.347668] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.347669] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.347670] pnp 00:00: [io 0x1000-0x2fff window] [ 0.347672] pnp 00:00: [io 0x3000-0x6fff window] [ 0.347673] pnp 00:00: [io 0x7000-0xafff window] [ 0.347674] pnp 00:00: [io 0xb000-0xffff window] [ 0.347675] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.347676] pnp 00:00: [mem 0xe0000000-0xf3ffffff window] [ 0.347677] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.347691] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.347698] pnp 00:01: [io 0x00f0-0x00ff] [ 0.347704] pnp 00:01: [irq 13] [ 0.347714] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.347720] pnp 00:02: [io 0x0000-0x000f] [ 0.347721] pnp 00:02: [io 0x0080-0x008f] [ 0.347722] pnp 00:02: [io 0x00c0-0x00df] [ 0.347723] pnp 00:02: [dma 4] [ 0.347732] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.347736] pnp 00:03: [io 0x0070-0x0071] [ 0.347739] pnp 00:03: [irq 8] [ 0.347748] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.347753] pnp 00:04: [io 0x0061] [ 0.347761] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.347768] pnp 00:05: [irq 12] [ 0.347778] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.347782] pnp 00:06: [io 0x0060] [ 0.347783] pnp 00:06: [io 0x0064] [ 0.347787] pnp 00:06: [irq 1] [ 0.347796] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.347943] pnp 00:07: [irq 7] [ 0.347944] pnp 00:07: [dma 3] [ 0.347945] pnp 00:07: [io 0x0378-0x037f] [ 0.347946] pnp 00:07: [io 0x0778-0x077d] [ 0.347981] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.348100] pnp 00:08: [irq 4] [ 0.348101] pnp 00:08: [io 0x03f8-0x03ff] [ 0.348136] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.348164] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.348174] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.348179] pnp 00:0a: [io 0x004e-0x004f] [ 0.348180] pnp 00:0a: [io 0x0cb0-0x0cbb] [ 0.348181] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.348191] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.348209] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 0.348218] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.348316] pnp 00:0c: [io 0x0010-0x001f] [ 0.348317] pnp 00:0c: [io 0x0050-0x0053] [ 0.348318] pnp 00:0c: [io 0x0072-0x0077] [ 0.348319] pnp 00:0c: [io 0x0090-0x009f] [ 0.348337] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348347] pnp 00:0d: [io 0x04d0-0x04d1] [ 0.348363] system 00:0d: [io 0x04d0-0x04d1] has been reserved [ 0.348401] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348410] pnp 00:0e: [io 0x0400-0x041f] [ 0.348412] pnp 00:0e: [io 0x0420-0x043f] [ 0.348413] pnp 00:0e: [io 0x0440-0x045f] [ 0.348414] pnp 00:0e: [io 0x0460-0x047f] [ 0.348415] pnp 00:0e: [io 0x0480-0x048f] [ 0.348416] pnp 00:0e: [io 0xf800-0xf81f] [ 0.348417] pnp 00:0e: [io 0xf820-0xf83f] [ 0.348418] pnp 00:0e: [io 0xf840-0xf85f] [ 0.348419] pnp 00:0e: [io 0xf860-0xf87f] [ 0.348420] pnp 00:0e: [io 0xfa00-0xfa3f] [ 0.348421] pnp 00:0e: [io 0xfc00-0xfc7f] [ 0.348422] pnp 00:0e: [io 0xfc80-0xfcff] [ 0.348423] pnp 00:0e: [io 0xfe00-0xfe7f] [ 0.348424] pnp 00:0e: [io 0xfe80-0xfeff] [ 0.348441] system 00:0e: [io 0x0400-0x041f] has been reserved [ 0.348479] system 00:0e: [io 0x0420-0x043f] has been reserved [ 0.348516] system 00:0e: [io 0x0440-0x045f] has been reserved [ 0.348554] system 00:0e: [io 0x0460-0x047f] has been reserved [ 0.348591] system 00:0e: [io 0x0480-0x048f] has been reserved [ 0.348629] system 00:0e: [io 0xf800-0xf81f] has been reserved [ 0.348666] system 00:0e: [io 0xf820-0xf83f] has been reserved [ 0.348703] system 00:0e: [io 0xf840-0xf85f] has been reserved [ 0.348740] system 00:0e: [io 0xf860-0xf87f] has been reserved [ 0.348778] system 00:0e: [io 0xfa00-0xfa3f] has been reserved [ 0.348815] system 00:0e: [io 0xfc00-0xfc7f] has been reserved [ 0.348852] system 00:0e: [io 0xfc80-0xfcff] has been reserved [ 0.348889] system 00:0e: [io 0xfe00-0xfe7f] has been reserved [ 0.348927] system 00:0e: [io 0xfe80-0xfeff] has been reserved [ 0.348965] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.349118] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.349119] pnp 00:0f: [mem 0x00100000-0xdfffffff] [ 0.349120] pnp 00:0f: [mem 0x000e4000-0x000fffff] [ 0.349121] pnp 00:0f: [mem 0xfec01000-0xfecfffff] [ 0.349122] pnp 00:0f: [mem 0xfed00400-0xfed3ffff] [ 0.349123] pnp 00:0f: [mem 0xfed45000-0xffffffff] [ 0.349124] pnp 00:0f: [mem 0xf4000000-0xf7ffffff] [ 0.349126] pnp 00:0f: [mem 0x000cfe00-0x000e3fff] [ 0.349148] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.349189] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.349229] system 00:0f: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.349269] system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.349308] system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved [ 0.349348] system 00:0f: [mem 0xfed45000-0xffffffff] has been reserved [ 0.349387] system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.349426] system 00:0f: [mem 0x000cfe00-0x000e3fff] has been reserved [ 0.349465] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.349472] pnp: PnP ACPI: found 16 devices [ 0.349505] ACPI: ACPI bus type pnp unregistered [ 0.354506] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 18] add_size 1000 [ 0.354509] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000 [ 0.354511] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 18] add_size 200000 [ 0.354516] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 24] add_size 1000 [ 0.354518] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 24] add_size 200000 [ 0.354519] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 24] add_size 200000 [ 0.354525] pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000 [ 0.354526] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 [ 0.354528] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 [ 0.354537] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354538] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354540] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354541] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354542] pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354544] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354545] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354546] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354548] pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354550] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 0.354591] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.354651] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff] [ 0.354691] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.354752] pci 0000:00:1c.6: BAR 14: assigned [mem 0xf8800000-0xf89fffff] [ 0.354792] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.354853] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.354891] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff] [ 0.354929] pci 0000:00:1c.6: BAR 13: assigned [io 0x4000-0x4fff] [ 0.354968] pci 0000:00:1c.0: PCI bridge to [bus 18] [ 0.355004] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.355044] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.355084] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.355147] pci 0000:00:1c.4: PCI bridge to [bus 24] [ 0.355183] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.355222] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff] [ 0.355263] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.355326] pci 0000:00:1c.6: PCI bridge to [bus 30] [ 0.355361] pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff] [ 0.355401] pci 0000:00:1c.6: bridge window [mem 0xf8800000-0xf89fffff] [ 0.355442] pci 0000:00:1c.6: bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.355509] pci 0000:00:1e.0: PCI bridge to [bus 0d] [ 0.355568] pci 0000:00:1e.0: setting latency timer to 64 [ 0.355571] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfdffffff] [ 0.355572] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7] [ 0.355573] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff] [ 0.355574] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff] [ 0.355575] pci_bus 0000:00: resource 8 [io 0x7000-0xafff] [ 0.355576] pci_bus 0000:00: resource 9 [io 0xb000-0xffff] [ 0.355577] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff] [ 0.355579] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff] [ 0.355580] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff] [ 0.355581] pci_bus 0000:18: resource 0 [io 0x2000-0x2fff] [ 0.355582] pci_bus 0000:18: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.355583] pci_bus 0000:18: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.355585] pci_bus 0000:24: resource 0 [io 0x3000-0x3fff] [ 0.355586] pci_bus 0000:24: resource 1 [mem 0xf8400000-0xf85fffff] [ 0.355587] pci_bus 0000:24: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.355588] pci_bus 0000:30: resource 0 [io 0x4000-0x4fff] [ 0.355589] pci_bus 0000:30: resource 1 [mem 0xf8800000-0xf89fffff] [ 0.355590] pci_bus 0000:30: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.355592] pci_bus 0000:0d: resource 4 [mem 0xf8000000-0xfdffffff] [ 0.355593] pci_bus 0000:0d: resource 5 [io 0x0000-0x0cf7] [ 0.355594] pci_bus 0000:0d: resource 6 [io 0x1000-0x2fff] [ 0.355595] pci_bus 0000:0d: resource 7 [io 0x3000-0x6fff] [ 0.355596] pci_bus 0000:0d: resource 8 [io 0x7000-0xafff] [ 0.355597] pci_bus 0000:0d: resource 9 [io 0xb000-0xffff] [ 0.355598] pci_bus 0000:0d: resource 10 [mem 0x000a0000-0x000bffff] [ 0.355600] pci_bus 0000:0d: resource 11 [mem 0xe0000000-0xf3ffffff] [ 0.355601] pci_bus 0000:0d: resource 12 [mem 0xfed40000-0xfed44fff] [ 0.355602] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.355603] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.355620] NET: Registered protocol family 2 [ 0.355740] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.356443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.356680] TCP: Hash tables configured (established 262144 bind 65536) [ 0.356747] TCP: reno registered [ 0.356779] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.356830] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.356935] NET: Registered protocol family 1 [ 0.356980] pci 0000:00:02.0: Boot video device [ 0.357055] PCI: CLS 64 bytes, default 64 [ 0.357071] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.357111] software IO TLB [mem 0xd77aa000-0xdb7a9fff] (64MB) mapped at [ffff8800d77aa000-ffff8800db7a9fff] [ 0.357528] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.358288] VFS: Disk quotas dquot_6.5.2 [ 0.358345] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.358550] msgmni has been set to 7504 [ 0.358737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.358798] io scheduler noop registered [ 0.358831] io scheduler deadline registered [ 0.358865] io scheduler cfq registered (default) [ 0.359022] intel_idle: MWAIT substates: 0x1120 [ 0.359023] intel_idle: v0.4 model 0x25 [ 0.359023] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.359083] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.359147] ACPI: Power Button [PBTN] [ 0.359201] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.359260] ACPI: Power Button [PWRF] [ 0.359315] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.379703] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.400007] 0000:00:16.3: ttyS1 at I/O 0x1188 (irq = 17) is a 16550A [ 0.400148] Linux agpgart interface v0.103 [ 0.400209] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.400283] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.400986] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.401097] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.401171] [drm] Initialized drm 1.1.0 20060810 [ 0.401318] i915 0000:00:02.0: setting latency timer to 64 [ 0.413907] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.413912] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.413951] [drm] Driver supports precise vblank timestamp query. [ 0.414013] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.515445] fbcon: inteldrmfb (fb0) is primary device [ 0.646568] ------------[ cut here ]------------ [ 0.646573] WARNING: at drivers/gpu/drm/i915/intel_display.c:1009 ironlake_crtc_disable+0xaf/0x8e0() [ 0.646574] Hardware name: HP Compaq 8100 Elite SFF PC [ 0.646574] pipe_off wait timed out [ 0.646575] Modules linked in: [ 0.646576] Pid: 1, comm: swapper/0 Not tainted 3.7.0-rc5 #70 [ 0.646577] Call Trace: [ 0.646582] [<ffffffff81036899>] ? warn_slowpath_common+0x79/0xc0 [ 0.646583] [<ffffffff81036995>] ? warn_slowpath_fmt+0x45/0x50 [ 0.646585] [<ffffffff812b57cb>] ? intel_wait_for_pipe_off+0x5b/0x170 [ 0.646586] [<ffffffff812b617f>] ? ironlake_crtc_disable+0xaf/0x8e0 [ 0.646588] [<ffffffff812c5499>] ? intel_dp_mode_fixup+0x249/0x270 [ 0.646589] [<ffffffff812bce86>] ? intel_set_mode+0x306/0x920 [ 0.646591] [<ffffffff812bdb91>] ? intel_crtc_set_config+0x6f1/0x950 [ 0.646594] [<ffffffff81274f3f>] ? drm_fb_helper_set_par+0x6f/0xe0 [ 0.646598] [<ffffffff8120c29f>] ? fbcon_init+0x55f/0x5f0 [ 0.646600] [<ffffffff8125aa6c>] ? visual_init+0xac/0x110 [ 0.646601] [<ffffffff8125c2cc>] ? bind_con_driver+0x16c/0x340 [ 0.646602] [<ffffffff8125c500>] ? take_over_console+0x60/0x70 [ 0.646604] [<ffffffff8120a64b>] ? fbcon_takeover+0x5b/0xc0 [ 0.646607] [<ffffffff81059375>] ? notifier_call_chain+0x45/0x60 [ 0.646608] [<ffffffff81059555>] ? __blocking_notifier_call_chain+0x55/0x80 [ 0.646609] [<ffffffff81203c3f>] ? register_framebuffer+0x1af/0x2e0 [ 0.646611] [<ffffffff812751a4>] ? drm_fb_helper_single_fb_probe+0x1f4/0x320 [ 0.646612] [<ffffffff81275479>] ? drm_fb_helper_initial_config+0x1a9/0x220 [ 0.646615] [<ffffffff810dd04d>] ? __kmalloc+0xed/0x130 [ 0.646617] [<ffffffff812d684d>] ? intel_fbdev_init+0x7d/0xb0 [ 0.646619] [<ffffffff81298935>] ? i915_driver_load+0xd95/0xf00 [ 0.646622] [<ffffffff81283a85>] ? drm_get_pci_dev+0x185/0x2c0 [ 0.646623] [<ffffffff811f3821>] ? pci_device_probe+0xd1/0x170 [ 0.646625] [<ffffffff812e9878>] ? driver_probe_device+0x68/0x220 [ 0.646626] [<ffffffff812e9ac3>] ? __driver_attach+0x93/0xa0 [ 0.646627] [<ffffffff812e9a30>] ? driver_probe_device+0x220/0x220 [ 0.646629] [<ffffffff812e7d0d>] ? bus_for_each_dev+0x4d/0x80 [ 0.646630] [<ffffffff812e8fe8>] ? bus_add_driver+0x178/0x260 [ 0.646631] [<ffffffff812ea0c4>] ? driver_register+0x84/0x180 [ 0.646634] [<ffffffff8188c7a7>] ? drm_core_init+0x12f/0x12f [ 0.646636] [<ffffffff810002e2>] ? do_one_initcall+0x122/0x170 [ 0.646638] [<ffffffff8142ba5c>] ? kernel_init+0x11c/0x2a0 [ 0.646641] [<ffffffff8186c54a>] ? do_early_param+0x83/0x83 [ 0.646643] [<ffffffff8105e761>] ? schedule_tail+0x21/0xb0 [ 0.646644] [<ffffffff8142b940>] ? rest_init+0x70/0x70 [ 0.646645] [<ffffffff814448ac>] ? ret_from_fork+0x7c/0xb0 [ 0.646646] [<ffffffff8142b940>] ? rest_init+0x70/0x70 [ 0.646651] ---[ end trace ad57c7783ee30339 ]--- [ 0.702399] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 0 [ 0.937367] Console: switching to colour frame buffer device 240x67 [ 0.948050] fb0: inteldrmfb frame buffer device [ 0.949269] drm: registered panic notifier [ 0.950530] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120913/video-1149) [ 0.951757] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) [ 0.953010] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.954262] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.955546] ahci 0000:00:1f.2: version 3.0 [ 0.955588] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.955636] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x17 impl SATA mode [ 0.956866] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs apst [ 0.958091] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.958409] scsi0 : ahci [ 0.959677] scsi1 : ahci [ 0.960917] scsi2 : ahci [ 0.962143] scsi3 : ahci [ 0.963351] scsi4 : ahci [ 0.964546] scsi5 : ahci [ 0.965719] ata1: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426100 irq 41 [ 0.966897] ata2: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426180 irq 41 [ 0.968063] ata3: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426200 irq 41 [ 0.969212] ata4: DUMMY [ 0.970370] ata5: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426300 irq 41 [ 0.971552] ata6: DUMMY [ 0.972775] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.976745] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.977952] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.979189] mousedev: PS/2 mouse device common for all mice [ 0.980406] rtc_cmos 00:03: RTC can wake from S4 [ 0.981688] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.982896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.984126] cpuidle: using governor ladder [ 0.985359] cpuidle: using governor menu [ 0.986614] TCP: cubic registered [ 0.987853] NET: Registered protocol family 10 [ 0.989145] mip6: Mobile IPv6 [ 0.990341] NET: Registered protocol family 17 [ 0.991550] Key type dns_resolver registered [ 0.992842] PM: Hibernation image not present or could not be loaded. [ 0.992848] registered taskstats version 1 [ 0.994314] rtc_cmos 00:03: setting system clock to 2012-11-12 18:46:20 UTC (1352745980) [ 1.288695] ata3: SATA link down (SStatus 0 SControl 300) [ 1.290496] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.291755] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.293545] ata5: SATA link down (SStatus 0 SControl 300) [ 1.294879] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.296138] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.297457] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.298701] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.299943] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.301182] ata2.00: ATAPI: hp CDDVDW TS-H653T, H6D1, max UDMA/100 [ 1.302432] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.302655] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 1.302661] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.303982] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.305247] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.307540] ata1.00: ATA-8: Hitachi HDS721025CLA682, JP1OA41A, max UDMA/133 [ 1.308996] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.310827] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.312123] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.313417] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.314708] ata2.00: configured for UDMA/100 [ 1.316076] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.317204] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.318527] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.320053] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.320269] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 1.320274] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.321710] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.323057] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.325585] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.325591] ata1.00: configured for UDMA/133 [ 1.327208] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72102 JP1O PQ: 0 ANSI: 5 [ 1.328792] ACPI: Invalid Power Resource to register! [ 1.328823] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.330273] sd 0:0:0:0: [sda] Write Protect is off [ 1.330308] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653T H6D1 PQ: 0 ANSI: 5 [ 1.333114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.333127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.352502] tsc: Refined TSC clocksource calibration: 3325.374 MHz [ 1.353959] Switching to clocksource tsc [ 1.378599] sda: sda1 sda2 < sda5 > [ 1.380167] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.528194] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.529612] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 1.531495] Freeing unused kernel memory: 492k freed [ 1.532988] Write protecting the kernel read-only data: 8192k [ 1.537179] Freeing unused kernel memory: 1748k freed [ 1.539892] Freeing unused kernel memory: 688k freed [ 4.139209] ACPI: Invalid PBLK length [7] [ 4.140768] ACPI: Requesting acpi_cpufreq [ 4.142356] ACPI: Invalid PBLK length [7] [ 4.143784] ACPI: Invalid PBLK length [7] [ 4.145232] ACPI: Invalid PBLK length [7] [ 4.213175] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2 [ 4.281869] microcode: CPU0 updated to revision 0x3, date = 2011-09-01 [ 4.283260] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2 [ 4.284782] microcode: CPU1 updated to revision 0x3, date = 2011-09-01 [ 4.286156] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2 [ 4.288113] microcode: CPU2 updated to revision 0x3, date = 2011-09-01 [ 4.289851] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2 [ 4.291340] microcode: CPU3 updated to revision 0x3, date = 2011-09-01 [ 4.292774] microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, Peter Oruba [ 4.409720] mei 0000:00:16.0: setting latency timer to 64 [ 4.409777] mei 0000:00:16.0: irq 42 for MSI/MSI-X [ 4.416630] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 4.417978] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 4.419675] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.419719] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.421705] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.481786] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 4.497651] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 4.551176] wmi: Mapper loaded [ 4.568329] ACPI: bus type usb registered [ 4.569761] usbcore: registered new interface driver usbfs [ 4.571193] usbcore: registered new interface driver hub [ 4.572615] usbcore: registered new device driver usb [ 4.612050] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:e3:b5:a0:e5:e4 [ 4.613439] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.614912] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF [ 4.738867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.740283] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.740318] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.740320] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 4.740324] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.744210] ehci_hcd 0000:00:1a.0: debug port 2 [ 4.744216] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 4.744241] ehci_hcd 0000:00:1a.0: irq 20, io mem 0xf0426800 [ 4.747763] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.749486] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.750098] tpm_tis 00:0a: TPM is disabled/deactivated (0x7) [ 4.751559] parport_pc 00:07: reported by Plug and Play ACPI [ 4.753111] gpio_ich: GPIO from 180 to 255 on gpio_ich [ 1.330379] ACPI: Invalid Power Resource to register! [ 4.753133] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 4.754061] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.754086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.754087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.754088] usb usb1: Product: EHCI Host Controller [ 4.754089] usb usb1: Manufacturer: Linux 3.7.0-rc5 ehci_hcd [ 4.754090] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.754156] hub 1-0:1.0: USB hub found [ 4.754159] hub 1-0:1.0: 3 ports detected [ 4.754280] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.754281] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 4.754285] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.758174] ehci_hcd 0000:00:1d.0: debug port 2 [ 4.758178] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 4.758182] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xf0426c00 [ 4.770048] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.770071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.770072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.770074] usb usb2: Product: EHCI Host Controller [ 4.770075] usb usb2: Manufacturer: Linux 3.7.0-rc5 ehci_hcd [ 4.770076] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.770136] hub 2-0:1.0: USB hub found [ 4.770140] hub 2-0:1.0: 3 ports detected [ 4.786391] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.787633] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.848246] iTCO_vendor_support: vendor-support=0 [ 4.957949] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.960690] iTCO_wdt: Found a Q57 TCO device (Version=2, TCOBASE=0xf860) [ 4.963462] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.065214] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 5.197222] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.198503] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.199867] hub 1-1:1.0: USB hub found [ 5.201301] hub 1-1:1.0: 6 ports detected [ 5.295371] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.312411] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 5.321151] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 5.444428] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.445722] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.447163] hub 2-1:1.0: USB hub found [ 5.449894] hub 2-1:1.0: 8 ports detected [ 5.487022] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 5.523854] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd [ 5.615947] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2512 [ 5.618716] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.621858] hub 1-1.1:1.0: USB hub found [ 5.624751] hub 1-1.1:1.0: 2 ports detected [ 5.699406] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd [ 5.820288] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c30e [ 5.823047] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.825680] usb 1-1.2: Product: HID compliant keyboard [ 5.828320] usb 1-1.2: Manufacturer: Logitech [ 6.067161] usbcore: registered new interface driver usbhid [ 6.069833] usbhid: USB HID core driver [ 6.082958] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 [ 6.084346] hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input0 [ 6.088606] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6 [ 6.091721] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input1 [ 7.424809] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 7.427918] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 7.430992] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.434070] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.435447] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.532163] Adding 7532540k swap on /dev/sda5. Priority:-1 extents:1 across:7532540k [ 9.559939] EXT4-fs (sda1): re-mounted. Opts: (null) [ 9.773619] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.214511] fuse init (API version 7.20) [ 10.243899] loop: module loaded [ 14.526314] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 14.628097] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 14.628220] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.108997] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 16.112283] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.119439] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.614348] lp0: using parport0 (interrupt-driven). [ 0.000000] Linux version 3.7.0-rc5 (mroos@prometheus) (gcc version 4.7.2 (Debian 4.7.2-4) ) #70 SMP Mon Nov 12 18:20:25 EET 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db7ac43f] usable [ 0.000000] BIOS-e820: [mem 0x00000000db7ac440-0x00000000db7ae49f] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7ae4a0-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 2 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb7ac max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdb7abfff] [ 0.000000] [mem 0x00000000-0xdb5fffff] page 2M [ 0.000000] [mem 0xdb600000-0xdb7abfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xdb7abfff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff] [ 0.000000] [mem 0x100000000-0x117ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x117ffffff @ [mem 0xdb7aa000-0xdb7abfff] [ 0.000000] ACPI: RSDP 00000000000e5210 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 00000000db7d0540 00040 (v01 HPQOEM SLIC-BPC 20110714 00000000) [ 0.000000] ACPI: FACP 00000000db7d05e8 00074 (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20120913/tbfadt-598) [ 0.000000] ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20120913/tbfadt-648) [ 0.000000] ACPI: DSDT 00000000db7d0a4f 0A69E (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000db7d0500 00040 [ 0.000000] ACPI: APIC 00000000db7d065c 000BC (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: ASF! 00000000db7d0718 00063 (v32 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: MCFG 00000000db7d077b 0003C (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: TCPA 00000000db7d07b7 00032 (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: SLIC 00000000db7d07e9 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET 00000000db7d095f 00038 (v01 COMPAQ IBEXPEAK 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880113800000-ffff8801175fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x117ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdb7abfff] [ 0.000000] node 0: [mem 0x100000000-0x117ffffff] [ 0.000000] On node 0 totalpages: 997179 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 878572 pages, LIFO batch:31 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 96768 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000db7ac000 - 00000000db7ad000 [ 0.000000] PM: Registered nosave memory: 00000000db7ad000 - 00000000db7ae000 [ 0.000000] PM: Registered nosave memory: 00000000db7ae000 - 00000000db7af000 [ 0.000000] PM: Registered nosave memory: 00000000db7af000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed40000 [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000 [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000 [ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880117c00000 s74048 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s74048 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 979253 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3842432k/4587520k available (4385k kernel code, 598804k absent, 146284k reserved, 4154k data, 492k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3325.058 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6650.11 BogoMIPS (lpj=13300232) [ 0.000062] pid_max: default: 32768 minimum: 301 [ 0.000111] Mount-cache hash table entries: 256 [ 0.000264] CPU: Physical Processor ID: 0 [ 0.000291] CPU: Processor Core ID: 0 [ 0.000319] mce: CPU supports 9 MCE banks [ 0.000352] CPU0: Thermal monitoring enabled (TM1) [ 0.000385] process: using mwait in idle threads [ 0.000414] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.000414] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000414] tlb_flushall_shift: 6 [ 0.000565] Freeing SMP alternatives: 20k freed [ 0.000599] ACPI: Core revision 20120913 [ 0.004736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044332] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05) [ 0.151074] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.151155] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.151195] ... version: 3 [ 0.151227] ... bit width: 48 [ 0.151259] ... generic registers: 4 [ 0.151291] ... value mask: 0000ffffffffffff [ 0.151327] ... max period: 000000007fffffff [ 0.151362] ... fixed-purpose events: 3 [ 0.151394] ... event mask: 000000070000000f [ 0.164811] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.151552] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.191186] Brought up 4 CPUs [ 0.191240] smpboot: Total of 4 processors activated (26600.46 BogoMIPS) [ 0.193070] PM: Registering ACPI NVS region [mem 0xdb7ac440-0xdb7ae49f] (8288 bytes) [ 0.193137] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots. [ 0.193239] NET: Registered protocol family 16 [ 0.193341] ACPI: bus type pci registered [ 0.193411] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.193476] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.196099] PCI: Using configuration type 1 for base access [ 0.196514] bio: create slab <bio-0> at 0 [ 0.196582] ACPI: Added _OSI(Module Device) [ 0.196615] ACPI: Added _OSI(Processor Device) [ 0.196648] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.196683] ACPI: Added _OSI(Processor Aggregator Device) [ 0.197237] ACPI: EC: Look up EC in DSDT [ 0.237871] ACPI: SSDT 00000000db7dc771 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.238098] ACPI: Dynamic OEM Table Load: [ 0.238139] ACPI: SSDT (null) 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.269769] ACPI: SSDT 00000000db7dc399 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E) [ 0.269982] ACPI: Dynamic OEM Table Load: [ 0.270022] ACPI: SSDT (null) 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E) [ 0.317762] ACPI: Interpreter enabled [ 0.317795] ACPI: (supports S0 S3 S4 S5) [ 0.317852] ACPI: Using IOAPIC for interrupt routing [ 0.335430] ACPI: No dock devices found. [ 0.335464] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335673] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211) [ 0.335750] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536) [ 0.335838] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.335908] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359) [ 0.335987] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.336198] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.336288] PCI host bridge to bus 0000:00 [ 0.336813] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.336849] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff] [ 0.336888] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.336926] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff] [ 0.336964] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff] [ 0.337002] pci_bus 0000:00: root bus resource [io 0x7000-0xafff] [ 0.337040] pci_bus 0000:00: root bus resource [io 0xb000-0xffff] [ 0.337077] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.337117] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff] [ 0.337156] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.337201] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.337214] DMAR: Disabling batched IOTLB flush on Ironlake [ 0.337263] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000 [ 0.337271] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.337275] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.337278] pci 0000:00:02.0: reg 20: [io 0x1170-0x1177] [ 0.337320] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.337345] pci 0000:00:16.0: reg 10: [mem 0xf0427100-0xf042710f 64bit] [ 0.337432] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.337453] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002 [ 0.337467] pci 0000:00:16.3: reg 10: [io 0x1188-0x118f] [ 0.337474] pci 0000:00:16.3: reg 14: [mem 0xf0424000-0xf0424fff] [ 0.337559] pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000 [ 0.337573] pci 0000:00:19.0: reg 10: [mem 0xf0400000-0xf041ffff] [ 0.337579] pci 0000:00:19.0: reg 14: [mem 0xf0425000-0xf0425fff] [ 0.337585] pci 0000:00:19.0: reg 18: [io 0x1100-0x111f] [ 0.337634] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.337652] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.337669] pci 0000:00:1a.0: reg 10: [mem 0xf0426800-0xf0426bff] [ 0.337742] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.337762] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.337773] pci 0000:00:1b.0: reg 10: [mem 0xf0420000-0xf0423fff 64bit] [ 0.337825] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.337842] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.337894] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.337913] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.337964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.337981] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.338032] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.338053] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.338069] pci 0000:00:1d.0: reg 10: [mem 0xf0426c00-0xf0426fff] [ 0.338140] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.338156] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.338203] pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100 [ 0.338306] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.338320] pci 0000:00:1f.2: reg 10: [io 0x1190-0x1197] [ 0.338325] pci 0000:00:1f.2: reg 14: [io 0x11a8-0x11ab] [ 0.338331] pci 0000:00:1f.2: reg 18: [io 0x1198-0x119f] [ 0.338337] pci 0000:00:1f.2: reg 1c: [io 0x11ac-0x11af] [ 0.338342] pci 0000:00:1f.2: reg 20: [io 0x1120-0x113f] [ 0.338349] pci 0000:00:1f.2: reg 24: [mem 0xf0426000-0xf04267ff] [ 0.338383] pci 0000:00:1f.2: PME# supported from D3hot [ 0.338423] pci 0000:00:1c.0: PCI bridge to [bus 18] [ 0.338492] pci 0000:00:1c.4: PCI bridge to [bus 24] [ 0.338562] pci 0000:00:1c.6: PCI bridge to [bus 30] [ 0.338647] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) [ 0.338691] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff] (subtractive decode) [ 0.338692] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.338694] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode) [ 0.338695] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode) [ 0.338696] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode) [ 0.338697] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode) [ 0.338698] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.338699] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode) [ 0.338700] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.338713] pci_bus 0000:00: on NUMA node 0 [ 0.338716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.338803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] [ 0.338828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT] [ 0.338850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX7._PRT] [ 0.338872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.338951] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211) [ 0.339027] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536) [ 0.339117] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359) [ 0.339195] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.339255] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.342389] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.342499] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.342604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.342709] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.342813] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.342918] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.343023] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.343127] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.343270] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.343333] vgaarb: loaded [ 0.343361] vgaarb: bridge control possible 0000:00:02.0 [ 0.343426] SCSI subsystem initialized [ 0.343458] ACPI: bus type scsi registered [ 0.343509] libata version 3.00 loaded. [ 0.343523] PCI: Using ACPI for IRQ routing [ 0.344659] PCI: Discovered peer bus 3f [ 0.344691] PCI: root bus 3f: using default resources [ 0.344692] PCI: Probing PCI hardware (bus 3f) [ 0.344705] PCI host bridge to bus 0000:3f [ 0.344739] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.344777] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.344817] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.344880] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000 [ 0.344893] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000 [ 0.344907] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000 [ 0.344918] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000 [ 0.344930] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000 [ 0.344942] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000 [ 0.344960] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.345022] PCI: pci_cache_line_size set to 64 bytes [ 0.345055] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.345056] e820: reserve RAM buffer [mem 0xdb7ac440-0xdbffffff] [ 0.345118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.345193] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.347232] Switching to clocksource hpet [ 0.347295] pnp: PnP ACPI init [ 0.347330] ACPI: bus type pnp registered [ 0.347461] pnp 00:00: [mem 0xf8000000-0xfdffffff window] [ 0.347462] pnp 00:00: [bus 00-ff] [ 0.347464] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.347465] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.347466] pnp 00:00: [io 0x1000-0x2fff window] [ 0.347467] pnp 00:00: [io 0x3000-0x6fff window] [ 0.347468] pnp 00:00: [io 0x7000-0xafff window] [ 0.347469] pnp 00:00: [io 0xb000-0xffff window] [ 0.347470] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.347471] pnp 00:00: [mem 0xe0000000-0xf3ffffff window] [ 0.347473] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.347487] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.347493] pnp 00:01: [io 0x00f0-0x00ff] [ 0.347499] pnp 00:01: [irq 13] [ 0.347509] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.347516] pnp 00:02: [io 0x0000-0x000f] [ 0.347517] pnp 00:02: [io 0x0080-0x008f] [ 0.347518] pnp 00:02: [io 0x00c0-0x00df] [ 0.347519] pnp 00:02: [dma 4] [ 0.347527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.347531] pnp 00:03: [io 0x0070-0x0071] [ 0.347535] pnp 00:03: [irq 8] [ 0.347544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.347548] pnp 00:04: [io 0x0061] [ 0.347556] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.347564] pnp 00:05: [irq 12] [ 0.347573] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.347578] pnp 00:06: [io 0x0060] [ 0.347579] pnp 00:06: [io 0x0064] [ 0.347582] pnp 00:06: [irq 1] [ 0.347591] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.347739] pnp 00:07: [irq 7] [ 0.347740] pnp 00:07: [dma 3] [ 0.347741] pnp 00:07: [io 0x0378-0x037f] [ 0.347742] pnp 00:07: [io 0x0778-0x077d] [ 0.347778] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.347896] pnp 00:08: [irq 4] [ 0.347897] pnp 00:08: [io 0x03f8-0x03ff] [ 0.347931] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.347961] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.347971] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active) [ 0.347976] pnp 00:0a: [io 0x004e-0x004f] [ 0.347977] pnp 00:0a: [io 0x0cb0-0x0cbb] [ 0.347978] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.347987] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.348006] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 0.348015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.348113] pnp 00:0c: [io 0x0010-0x001f] [ 0.348114] pnp 00:0c: [io 0x0050-0x0053] [ 0.348115] pnp 00:0c: [io 0x0072-0x0077] [ 0.348116] pnp 00:0c: [io 0x0090-0x009f] [ 0.348133] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348144] pnp 00:0d: [io 0x04d0-0x04d1] [ 0.348160] system 00:0d: [io 0x04d0-0x04d1] has been reserved [ 0.348198] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348207] pnp 00:0e: [io 0x0400-0x041f] [ 0.348208] pnp 00:0e: [io 0x0420-0x043f] [ 0.348209] pnp 00:0e: [io 0x0440-0x045f] [ 0.348210] pnp 00:0e: [io 0x0460-0x047f] [ 0.348211] pnp 00:0e: [io 0x0480-0x048f] [ 0.348212] pnp 00:0e: [io 0xf800-0xf81f] [ 0.348213] pnp 00:0e: [io 0xf820-0xf83f] [ 0.348214] pnp 00:0e: [io 0xf840-0xf85f] [ 0.348215] pnp 00:0e: [io 0xf860-0xf87f] [ 0.348216] pnp 00:0e: [io 0xfa00-0xfa3f] [ 0.348217] pnp 00:0e: [io 0xfc00-0xfc7f] [ 0.348218] pnp 00:0e: [io 0xfc80-0xfcff] [ 0.348220] pnp 00:0e: [io 0xfe00-0xfe7f] [ 0.348221] pnp 00:0e: [io 0xfe80-0xfeff] [ 0.348238] system 00:0e: [io 0x0400-0x041f] has been reserved [ 0.348275] system 00:0e: [io 0x0420-0x043f] has been reserved [ 0.348312] system 00:0e: [io 0x0440-0x045f] has been reserved [ 0.348350] system 00:0e: [io 0x0460-0x047f] has been reserved [ 0.348387] system 00:0e: [io 0x0480-0x048f] has been reserved [ 0.348424] system 00:0e: [io 0xf800-0xf81f] has been reserved [ 0.348462] system 00:0e: [io 0xf820-0xf83f] has been reserved [ 0.348499] system 00:0e: [io 0xf840-0xf85f] has been reserved [ 0.348536] system 00:0e: [io 0xf860-0xf87f] has been reserved [ 0.348574] system 00:0e: [io 0xfa00-0xfa3f] has been reserved [ 0.348611] system 00:0e: [io 0xfc00-0xfc7f] has been reserved [ 0.348649] system 00:0e: [io 0xfc80-0xfcff] has been reserved [ 0.348686] system 00:0e: [io 0xfe00-0xfe7f] has been reserved [ 0.348723] system 00:0e: [io 0xfe80-0xfeff] has been reserved [ 0.348761] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348914] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.348915] pnp 00:0f: [mem 0x00100000-0xdfffffff] [ 0.348916] pnp 00:0f: [mem 0x000e4000-0x000fffff] [ 0.348917] pnp 00:0f: [mem 0xfec01000-0xfecfffff] [ 0.348918] pnp 00:0f: [mem 0xfed00400-0xfed3ffff] [ 0.348919] pnp 00:0f: [mem 0xfed45000-0xffffffff] [ 0.348920] pnp 00:0f: [mem 0xf4000000-0xf7ffffff] [ 0.348922] pnp 00:0f: [mem 0x000cfe00-0x000e3fff] [ 0.348943] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.348985] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.349024] system 00:0f: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.349064] system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.349103] system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved [ 0.349142] system 00:0f: [mem 0xfed45000-0xffffffff] has been reserved [ 0.349181] system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.349220] system 00:0f: [mem 0x000cfe00-0x000e3fff] has been reserved [ 0.349260] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.349267] pnp: PnP ACPI: found 16 devices [ 0.349299] ACPI: ACPI bus type pnp unregistered [ 0.354300] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 18] add_size 1000 [ 0.354303] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000 [ 0.354305] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 18] add_size 200000 [ 0.354310] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 24] add_size 1000 [ 0.354312] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 24] add_size 200000 [ 0.354313] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 24] add_size 200000 [ 0.354319] pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000 [ 0.354320] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 [ 0.354322] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 [ 0.354331] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354333] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354334] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354335] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354337] pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354338] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354339] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354341] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354342] pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354344] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 0.354385] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.354446] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff] [ 0.354486] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.354546] pci 0000:00:1c.6: BAR 14: assigned [mem 0xf8800000-0xf89fffff] [ 0.354586] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.354648] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.354686] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff] [ 0.354725] pci 0000:00:1c.6: BAR 13: assigned [io 0x4000-0x4fff] [ 0.354764] pci 0000:00:1c.0: PCI bridge to [bus 18] [ 0.354799] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.354839] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.354880] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.354943] pci 0000:00:1c.4: PCI bridge to [bus 24] [ 0.354978] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.355018] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff] [ 0.355058] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.355121] pci 0000:00:1c.6: PCI bridge to [bus 30] [ 0.355157] pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff] [ 0.355196] pci 0000:00:1c.6: bridge window [mem 0xf8800000-0xf89fffff] [ 0.355237] pci 0000:00:1c.6: bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.355304] pci 0000:00:1e.0: PCI bridge to [bus 0d] [ 0.355363] pci 0000:00:1e.0: setting latency timer to 64 [ 0.355366] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfdffffff] [ 0.355367] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7] [ 0.355368] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff] [ 0.355369] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff] [ 0.355370] pci_bus 0000:00: resource 8 [io 0x7000-0xafff] [ 0.355371] pci_bus 0000:00: resource 9 [io 0xb000-0xffff] [ 0.355373] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff] [ 0.355374] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff] [ 0.355375] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff] [ 0.355376] pci_bus 0000:18: resource 0 [io 0x2000-0x2fff] [ 0.355377] pci_bus 0000:18: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.355378] pci_bus 0000:18: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.355380] pci_bus 0000:24: resource 0 [io 0x3000-0x3fff] [ 0.355381] pci_bus 0000:24: resource 1 [mem 0xf8400000-0xf85fffff] [ 0.355382] pci_bus 0000:24: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.355383] pci_bus 0000:30: resource 0 [io 0x4000-0x4fff] [ 0.355384] pci_bus 0000:30: resource 1 [mem 0xf8800000-0xf89fffff] [ 0.355385] pci_bus 0000:30: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref] [ 0.355387] pci_bus 0000:0d: resource 4 [mem 0xf8000000-0xfdffffff] [ 0.355388] pci_bus 0000:0d: resource 5 [io 0x0000-0x0cf7] [ 0.355389] pci_bus 0000:0d: resource 6 [io 0x1000-0x2fff] [ 0.355390] pci_bus 0000:0d: resource 7 [io 0x3000-0x6fff] [ 0.355391] pci_bus 0000:0d: resource 8 [io 0x7000-0xafff] [ 0.355392] pci_bus 0000:0d: resource 9 [io 0xb000-0xffff] [ 0.355393] pci_bus 0000:0d: resource 10 [mem 0x000a0000-0x000bffff] [ 0.355395] pci_bus 0000:0d: resource 11 [mem 0xe0000000-0xf3ffffff] [ 0.355396] pci_bus 0000:0d: resource 12 [mem 0xfed40000-0xfed44fff] [ 0.355397] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.355398] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.355415] NET: Registered protocol family 2 [ 0.355534] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.356236] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.356473] TCP: Hash tables configured (established 262144 bind 65536) [ 0.356541] TCP: reno registered [ 0.356573] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.356623] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.356729] NET: Registered protocol family 1 [ 0.356773] pci 0000:00:02.0: Boot video device [ 0.356848] PCI: CLS 64 bytes, default 64 [ 0.356863] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.356903] software IO TLB [mem 0xd77aa000-0xdb7a9fff] (64MB) mapped at [ffff8800d77aa000-ffff8800db7a9fff] [ 0.357322] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.358082] VFS: Disk quotas dquot_6.5.2 [ 0.358139] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.358343] msgmni has been set to 7504 [ 0.358530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.358591] io scheduler noop registered [ 0.358623] io scheduler deadline registered [ 0.358658] io scheduler cfq registered (default) [ 0.358814] intel_idle: MWAIT substates: 0x1120 [ 0.358815] intel_idle: v0.4 model 0x25 [ 0.358816] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.358877] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.358940] ACPI: Power Button [PBTN] [ 0.358993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.359053] ACPI: Power Button [PWRF] [ 0.359107] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.379497] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.399797] 0000:00:16.3: ttyS1 at I/O 0x1188 (irq = 17) is a 16550A [ 0.399935] Linux agpgart interface v0.103 [ 0.399998] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.400071] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.400775] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.400886] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.400960] [drm] Initialized drm 1.1.0 20060810 [ 0.401108] i915 0000:00:02.0: setting latency timer to 64 [ 0.413696] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.413701] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.413740] [drm] Driver supports precise vblank timestamp query. [ 0.413802] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.503304] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 17 [ 0.503366] Raw EDID: [ 0.503395] 00 ff ff ff ff ff ff 00 22 f0 49 29 00 00 00 00 [ 0.503431] 15 15 01 04 a5 33 1d 78 26 01 f5 a2 57 52 9f 27 [ 0.503468] 0a 50 54 a1 08 00 81 c0 81 80 95 00 b3 00 d1 c0 [ 0.503504] 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c [ 0.503540] 45 00 fe 1f 11 00 00 1e 00 00 00 fd 00 32 4c 18 [ 0.503577] 5e 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 48 [ 0.503614] 50 20 4c 41 32 33 30 36 0a 20 20 20 00 11 ff 00 [ 0.503651] 43 4e 43 31 32 31 31 32 50 42 0a 20 20 00 5a 00 [ 0.530984] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 15 [ 0.531046] Raw EDID: [ 0.531074] 00 ff ff ff ff ff ff 00 22 f0 49 29 00 00 00 00 [ 0.531111] 15 15 01 04 a5 33 1d 78 26 01 f5 a2 57 52 9f 27 [ 0.531147] 0a 50 54 a1 08 00 81 c0 81 80 95 00 b3 00 d1 c0 [ 0.531183] 01 01 01 11 01 02 3a 80 18 71 38 2d 40 58 2c 45 [ 0.531220] 00 fe 1f 11 00 00 1e 00 00 00 fd 00 32 4c 18 5e [ 0.531257] 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 48 50 [ 0.531293] 20 4c 41 32 33 30 36 0a 20 20 20 00 00 00 ff 00 [ 0.531330] 43 4e 43 31 32 31 31 32 50 42 0a 20 20 00 5a 00 [ 0.585843] fbcon: inteldrmfb (fb0) is primary device [ 0.735007] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting [ 0.893611] ------------[ cut here ]------------ [ 0.893615] WARNING: at drivers/gpu/drm/i915/intel_display.c:1009 ironlake_crtc_disable+0xaf/0x8e0() [ 0.893616] Hardware name: HP Compaq 8100 Elite SFF PC [ 0.893616] pipe_off wait timed out [ 0.893617] Modules linked in: [ 0.893618] Pid: 1, comm: swapper/0 Not tainted 3.7.0-rc5 #70 [ 0.893619] Call Trace: [ 0.893623] [<ffffffff81036899>] ? warn_slowpath_common+0x79/0xc0 [ 0.893624] [<ffffffff81036995>] ? warn_slowpath_fmt+0x45/0x50 [ 0.893626] [<ffffffff812b57cb>] ? intel_wait_for_pipe_off+0x5b/0x170 [ 0.893627] [<ffffffff812b617f>] ? ironlake_crtc_disable+0xaf/0x8e0 [ 0.893629] [<ffffffff812c5499>] ? intel_dp_mode_fixup+0x249/0x270 [ 0.893630] [<ffffffff812bce86>] ? intel_set_mode+0x306/0x920 [ 0.893632] [<ffffffff812bdb91>] ? intel_crtc_set_config+0x6f1/0x950 [ 0.893635] [<ffffffff81442241>] ? __mutex_lock_slowpath+0xd1/0x140 [ 0.893639] [<ffffffff81274f3f>] ? drm_fb_helper_set_par+0x6f/0xe0 [ 0.893642] [<ffffffff8120c29f>] ? fbcon_init+0x55f/0x5f0 [ 0.893644] [<ffffffff8125aa6c>] ? visual_init+0xac/0x110 [ 0.893645] [<ffffffff8125c2cc>] ? bind_con_driver+0x16c/0x340 [ 0.893647] [<ffffffff8125c500>] ? take_over_console+0x60/0x70 [ 0.893648] [<ffffffff8120a64b>] ? fbcon_takeover+0x5b/0xc0 [ 0.893651] [<ffffffff81059375>] ? notifier_call_chain+0x45/0x60 [ 0.893652] [<ffffffff81059555>] ? __blocking_notifier_call_chain+0x55/0x80 [ 0.893653] [<ffffffff81203c3f>] ? register_framebuffer+0x1af/0x2e0 [ 0.893655] [<ffffffff812751a4>] ? drm_fb_helper_single_fb_probe+0x1f4/0x320 [ 0.893656] [<ffffffff81275479>] ? drm_fb_helper_initial_config+0x1a9/0x220 [ 0.893659] [<ffffffff810dd04d>] ? __kmalloc+0xed/0x130 [ 0.893661] [<ffffffff812d684d>] ? intel_fbdev_init+0x7d/0xb0 [ 0.893663] [<ffffffff81298935>] ? i915_driver_load+0xd95/0xf00 [ 0.893666] [<ffffffff81283a85>] ? drm_get_pci_dev+0x185/0x2c0 [ 0.893667] [<ffffffff811f3821>] ? pci_device_probe+0xd1/0x170 [ 0.893669] [<ffffffff812e9878>] ? driver_probe_device+0x68/0x220 [ 0.893670] [<ffffffff812e9ac3>] ? __driver_attach+0x93/0xa0 [ 0.893671] [<ffffffff812e9a30>] ? driver_probe_device+0x220/0x220 [ 0.893673] [<ffffffff812e7d0d>] ? bus_for_each_dev+0x4d/0x80 [ 0.893674] [<ffffffff812e8fe8>] ? bus_add_driver+0x178/0x260 [ 0.893675] [<ffffffff812ea0c4>] ? driver_register+0x84/0x180 [ 0.893678] [<ffffffff8188c7a7>] ? drm_core_init+0x12f/0x12f [ 0.893680] [<ffffffff810002e2>] ? do_one_initcall+0x122/0x170 [ 0.893682] [<ffffffff8142ba5c>] ? kernel_init+0x11c/0x2a0 [ 0.893684] [<ffffffff8186c54a>] ? do_early_param+0x83/0x83 [ 0.893686] [<ffffffff8105e761>] ? schedule_tail+0x21/0xb0 [ 0.893686] [<ffffffff8142b940>] ? rest_init+0x70/0x70 [ 0.893688] [<ffffffff814448ac>] ? ret_from_fork+0x7c/0xb0 [ 0.893689] [<ffffffff8142b940>] ? rest_init+0x70/0x70 [ 0.893693] ---[ end trace dee2e32e6b8520d3 ]--- [ 0.949441] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 0 [ 1.184415] Console: switching to colour frame buffer device 240x67 [ 1.199099] fb0: inteldrmfb frame buffer device [ 1.200483] drm: registered panic notifier [ 1.201895] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120913/video-1149) [ 1.203270] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) [ 1.204648] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.206015] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.207421] ahci 0000:00:1f.2: version 3.0 [ 1.207462] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.207509] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x17 impl SATA mode [ 1.208875] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs apst [ 1.210243] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.210555] scsi0 : ahci [ 1.211952] scsi1 : ahci [ 1.213316] scsi2 : ahci [ 1.214647] scsi3 : ahci [ 1.215948] scsi4 : ahci [ 1.217224] scsi5 : ahci [ 1.218451] ata1: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426100 irq 41 [ 1.219665] ata2: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426180 irq 41 [ 1.220864] ata3: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426200 irq 41 [ 1.222041] ata4: DUMMY [ 1.223217] ata5: SATA max UDMA/133 abar m2048@0xf0426000 port 0xf0426300 irq 41 [ 1.224412] ata6: DUMMY [ 1.225659] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.229396] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.230614] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.231877] mousedev: PS/2 mouse device common for all mice [ 1.233116] rtc_cmos 00:03: RTC can wake from S4 [ 1.234400] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.235620] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.236869] cpuidle: using governor ladder [ 1.238124] cpuidle: using governor menu [ 1.239398] TCP: cubic registered [ 1.240672] NET: Registered protocol family 10 [ 1.241980] mip6: Mobile IPv6 [ 1.243187] NET: Registered protocol family 17 [ 1.244413] Key type dns_resolver registered [ 1.245732] PM: Hibernation image not present or could not be loaded. [ 1.245739] registered taskstats version 1 [ 1.247242] rtc_cmos 00:03: setting system clock to 2012-11-12 19:25:53 UTC (1352748353) [ 1.352279] tsc: Refined TSC clocksource calibration: 3325.374 MHz [ 1.353591] Switching to clocksource tsc [ 1.543709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.545562] ata3: SATA link down (SStatus 0 SControl 300) [ 1.547106] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.548403] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.549699] ata5: SATA link down (SStatus 0 SControl 300) [ 1.551005] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.552363] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.552562] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 1.552569] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.553951] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.555278] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.556672] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.558257] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.560110] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.561910] ata2.00: ATAPI: hp CDDVDW TS-H653T, H6D1, max UDMA/100 [ 1.563965] ata1.00: ATA-8: Hitachi HDS721025CLA682, JP1OA41A, max UDMA/133 [ 1.565894] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.567888] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.569013] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.570586] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.572492] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.573839] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.575177] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.576516] ata2.00: configured for UDMA/100 [ 1.577853] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.578048] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 1.578055] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.579511] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.580904] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.583461] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.583467] ata1.00: configured for UDMA/133 [ 1.585167] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72102 JP1O PQ: 0 ANSI: 5 [ 1.586728] ACPI: Invalid Power Resource to register! [ 1.586782] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.588324] sd 0:0:0:0: [sda] Write Protect is off [ 1.588625] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653T H6D1 PQ: 0 ANSI: 5 [ 1.591175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.591187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.636557] sda: sda1 sda2 < sda5 > [ 1.638153] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.752690] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.754138] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 1.756068] Freeing unused kernel memory: 492k freed [ 1.757555] Write protecting the kernel read-only data: 8192k [ 1.761768] Freeing unused kernel memory: 1748k freed [ 1.764548] Freeing unused kernel memory: 688k freed [ 4.397122] ACPI: Invalid PBLK length [7] [ 4.398638] ACPI: Requesting acpi_cpufreq [ 4.400259] ACPI: Invalid PBLK length [7] [ 4.401708] ACPI: Invalid PBLK length [7] [ 4.403196] ACPI: Invalid PBLK length [7] [ 4.512678] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2 [ 4.583332] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 4.584728] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 4.586151] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.586193] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.587668] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 4.647552] microcode: CPU0 updated to revision 0x3, date = 2011-09-01 [ 4.649353] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2 [ 4.651281] microcode: CPU1 updated to revision 0x3, date = 2011-09-01 [ 4.653088] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2 [ 4.654646] microcode: CPU2 updated to revision 0x3, date = 2011-09-01 [ 4.656074] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2 [ 4.657622] microcode: CPU3 updated to revision 0x3, date = 2011-09-01 [ 4.659065] microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, Peter Oruba [ 4.715596] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 4.726013] wmi: Mapper loaded [ 4.735019] parport_pc 00:07: reported by Plug and Play ACPI [ 1.588752] ACPI: Invalid Power Resource to register! [ 4.736514] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 4.782458] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:e3:b5:a0:e5:e4 [ 4.783839] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.785272] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF [ 4.786690] mei 0000:00:16.0: setting latency timer to 64 [ 4.786734] mei 0000:00:16.0: irq 43 for MSI/MSI-X [ 4.804492] gpio_ich: GPIO from 180 to 255 on gpio_ich [ 4.833861] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 4.856997] iTCO_vendor_support: vendor-support=0 [ 4.866955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.869116] iTCO_wdt: Found a Q57 TCO device (Version=2, TCOBASE=0xf860) [ 4.871242] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.917771] ACPI: bus type usb registered [ 4.919140] usbcore: registered new interface driver usbfs [ 4.920514] usbcore: registered new interface driver hub [ 4.921983] usbcore: registered new device driver usb [ 4.971948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.973621] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.973626] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 4.976492] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.983276] ehci_hcd 0000:00:1a.0: debug port 2 [ 4.986115] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 4.986216] ehci_hcd 0000:00:1a.0: irq 20, io mem 0xf0426800 [ 4.997185] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.999240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.001372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.003446] usb usb1: Product: EHCI Host Controller [ 5.005557] usb usb1: Manufacturer: Linux 3.7.0-rc5 ehci_hcd [ 5.007635] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.009834] hub 1-0:1.0: USB hub found [ 5.011235] hub 1-0:1.0: 3 ports detected [ 5.012738] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.012740] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.014143] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.019419] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.020848] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 5.020857] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xf0426c00 [ 5.030762] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.032147] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.033498] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.033636] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.034833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.036196] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.037636] usb usb2: Product: EHCI Host Controller [ 5.039195] usb usb2: Manufacturer: Linux 3.7.0-rc5 ehci_hcd [ 5.040751] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.042375] hub 2-0:1.0: USB hub found [ 5.043648] hub 2-0:1.0: 3 ports detected [ 5.084925] tpm_tis 00:0a: TPM is disabled/deactivated (0x7) [ 5.185048] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.186362] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.320186] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 5.328880] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.452402] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.454376] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.456529] hub 1-1:1.0: USB hub found [ 5.458208] hub 1-1:1.0: 6 ports detected [ 5.510155] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 5.571008] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 5.571413] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 5.703342] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.704626] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.706068] hub 2-1:1.0: USB hub found [ 5.707474] hub 2-1:1.0: 8 ports detected [ 5.778892] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd [ 5.870981] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2512 [ 5.873831] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.876863] hub 1-1.1:1.0: USB hub found [ 5.880531] hub 1-1.1:1.0: 2 ports detected [ 5.954494] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd [ 6.075265] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c30e [ 6.076703] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.078051] usb 1-1.2: Product: HID compliant keyboard [ 6.079314] usb 1-1.2: Manufacturer: Logitech [ 6.392908] usbcore: registered new interface driver usbhid [ 6.395341] usbhid: USB HID core driver [ 6.407429] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 [ 6.408786] hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input0 [ 6.413203] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6 [ 6.414607] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input1 [ 6.690917] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 6.694022] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 6.697137] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.700257] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 6.703315] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 7.753385] Adding 7532540k swap on /dev/sda5. Priority:-1 extents:1 across:7532540k [ 7.781064] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.996172] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.429058] fuse init (API version 7.20) [ 8.457251] loop: module loaded [ 12.646029] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 12.749589] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 12.749705] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.222562] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 14.225828] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 14.233041] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.380159] lp0: using parport0 (interrupt-driven). -- Meelis Roos (mroos(a)linux.ee)

3 3

[RFC] drm/ttm: add minimum residency constraint for bo eviction
by j.glisse＠gmail.com 30 Nov '12

30 Nov '12

So i spend the day looking at ttm and eviction. The first patch i sent earlier is i believe something that should be merged. This patch however is more about discussing if other people are interested in similar mecanism to be share among driver through ttm. I could otherwise just move its logic to the radeon driver. So the idea of this patch is that we don't want to constantly move object in and out of certain memory pool, mostly VRAM. So it adds a minimum residency time and no object that have been in the given pool for less than this residency time can be moved out. It closely solve regression we are having with radeon since gallium driver change and probably improve some other workload. Statistic i gathered on xonotic/realquake showed that we can have as much as 1GB in each direction (VRAM to system and system to vram) over a second. So we are obviously not saturating the PCIE bandwidth. Profiling shows that 80-90% of the cost of this eviction is in memory allocation/deallocation for the system memory (lot of irqlock, and mostly kernel spending time allocating pages thing 256 000 or more page per second to allocate/deallocate. I used this WIP patch to gather statistic and play with various combination : http://people.freedesktop.org/~glisse/0001-TTM-EVICT-WIP.patch Some numbers with xonotic : 17.369fps stock 3.7 kernel 27.883fps 3.7 kernel + do not preserve caching patch ~ +60% 49.292fps 3.7 kernel + WIP with 500ms residency for all pool and no bo wait for eviction 49.258fps 3.7 kernel + WIP with 500ms residency for all pool and bo wait 48.213fps 3.7 kernel always allowing GTT placement (basicly revent the gallium patch effect) Other design i am thinking of is changing the way radeon handle it's memory and stop trying to revalidate object to different memory pool at each cs, instead i think we should keep a vram lru list probably per process and move bo out of vram according to this lru and following some euristic. So radeon would only move bo into vram when there is room. Other improvement i am thinking of is to reuse GTT memory of object that are moved in for object that are evicted as statistic i gathered showed that it's often close amount that move in and out. But this would require true dma as it would mean scheduling in/out move on page granularity or group of page (write 4 pages from vram to scratch 4pages into sys, write 4 pages of system memory bo to vram 4 pages, write 4pages of vram to the just moved 4pages of system memory ...). Cheers, Jerome

6 33

[PATCH 0/6] drivers: convert struct spinlock to spinlock_t
by Luis R. Rodriguez 30 Nov '12

30 Nov '12

From: "Luis R. Rodriguez" <mcgrof(a)do-not-panic.com> Turns out a few drivers have strayed away from using the spinlock_t typedef and decided to use struct spinlock directly. This series converts these drivers to use spinlock_t. Each change has been compile tested with allmodconfig and sparse checked. Driver developers may want to look at the compile error output / sparse error report supplied in each commit log, in particular brcmfmac and i915, there are quite a few things that are not related to this change that the developers can clean up / fix. Luis R. Rodriguez (6): ux500: convert struct spinlock to spinlock_t i915: convert struct spinlock to spinlock_t s5p-fimc: convert struct spinlock to spinlock_t s5p-jpeg: convert struct spinlock to spinlock_t brcmfmac: convert struct spinlock to spinlock_t ie6xx_wdt: convert struct spinlock to spinlock_t drivers/crypto/ux500/cryp/cryp.h | 4 ++-- drivers/crypto/ux500/hash/hash_alg.h | 4 ++-- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- drivers/media/platform/s5p-fimc/mipi-csis.c | 2 +- drivers/media/platform/s5p-jpeg/jpeg-core.h | 2 +- drivers/net/wireless/brcm80211/brcmfmac/fweh.h | 2 +- drivers/watchdog/ie6xx_wdt.c | 2 +- 7 files changed, 10 insertions(+), 10 deletions(-) -- 1.7.10.4

3 6

← Newer
1
...
43
44
45
46
47
48
49
...
80
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel November 2012