dri-devel January 2016

dri-devel@lists.freedesktop.org

194 participants
1200 discussions

[Bug 89126] [r300] Hardware accelerated flash shows wrong colors on 480p Youtube videos
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=89126 Bug ID: 89126 Summary: [r300] Hardware accelerated flash shows wrong colors on 480p Youtube videos Product: Mesa Version: 10.4 Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Drivers/Gallium/r300 Assignee: dri-devel(a)lists.freedesktop.org Reporter: gooberslot(a)hotmail.com QA Contact: dri-devel(a)lists.freedesktop.org When hardware acceleration is turned on for flash videos 480p videos on Youtube show the wrong colors; 360p and 720p work fine. Strangely, I've not noticed problems on any other site but I'm not sure if other sites are using hardware acceleration since most don't tell you. I've tested this on Firefox and the old Opera 12.16 and it happens on both. Disabling hardware acceleration causes all the videos to have the same colors. Here are 3 pictures demonstrating the problem. 360p: http://imgur.com/Oz955Wg 480p: http://imgur.com/19gf3Gg 720p: http://imgur.com/lOzRQxu -- You are receiving this mail because: You are the assignee for the bug.

1 2

[Bug 88717] [r300g] r300compiler error: Failed to translate rgb instruction - while running a game with gallium-nine
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=88717 Bug ID: 88717 Summary: [r300g] r300compiler error: Failed to translate rgb instruction - while running a game with gallium-nine Product: Mesa Version: git Hardware: x86 (IA32) URL: https://github.com/iXit/Mesa-3D/issues/64 OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Drivers/Gallium/r300 Assignee: dri-devel(a)lists.freedesktop.org Reporter: fabio.ped(a)libero.it QA Contact: dri-devel(a)lists.freedesktop.org When running Tales of Monkey Island game with quality >= 7/9 using iXit mesa master branch I get the following error: r300compiler error: Failed to translate rgb instruction. r300 FP: Compiler Error: Failed to translate rgb instruction. Using a dummy shader instead. r300: Initial fragment program If useful I attached the output when running with "RADEON_DEBUG=fp wine MonkeyIsland101.exe > ~/nine-tales-monkey-island.txt 2>&1". According to axeldavy on the gallium-nine github issue tracker ( https://github.com/iXit/Mesa-3D/issues/64 ) the shader seems fine, it is likely a r300 compiler error. -- You are receiving this mail because: You are the assignee for the bug.

1 11

[Bug 88619] [r300g] multiple tex-miplevel-selection tests crash with "u_blitter:494: Caught recursion. This is a driver bug."
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=88619 Bug ID: 88619 Summary: [r300g] multiple tex-miplevel-selection tests crash with "u_blitter:494: Caught recursion. This is a driver bug." Product: Mesa Version: git Hardware: x86 (IA32) OS: All Status: NEW Severity: normal Priority: medium Component: Drivers/Gallium/r300 Assignee: dri-devel(a)lists.freedesktop.org Reporter: pavel.ondracka(a)email.cz QA Contact: dri-devel(a)lists.freedesktop.org Recently around 20 tex-miplevel-selection test regressed on my RV530. Specifically this concerns the tex-miplevel-selection {1D,2D,2DRect}Shadow tests eg. tex-miplevel-selection *GradARB 1DShadow -auto -fbo tex-miplevel-selection *GradARB 2DRectShadow -auto -fbo tex-miplevel-selection GL2:texture() 2DRectShadow -auto -fbo and others. It used to work approximately one month ago and I tried to bisect mesa, however I was unable to find a good commit, so the regression must have happened in some other component. My best guess at this moment is some piglit change. Those tests are the only crashing piglits on my RV530 at the moment. Backtrace from one selected test: /bin/tex-miplevel-selection *GradARB 1DShadow -auto -fbo r300: DRM version: 2.40.0, Name: ATI RV530, ID: 0x71c5, GB: 1, Z: 2 r300: GART size: 509 MB, VRAM size: 256 MB r300: AA compression RAM: YES, Z compression RAM: YES, HiZ RAM: YES u_blitter:494: Caught recursion. This is a driver bug. Program received signal SIGSEGV, Segmentation fault. r300_emit_gpu_flush (r300=0x8090ca0, size=9, state=0x807e7d0) at r300_emit.c:349 349 height = surf->cbzb_height; (gdb) bt full #0 r300_emit_gpu_flush (r300=0x8090ca0, size=9, state=0x807e7d0) at r300_emit.c:349 gpuflush = 0x807e7d0 fb = 0x807e798 height = 1 width = 1 cs_copy = 0xb4b3b008 cs_winsys = 0x807e238 cs_count = 0 __func__ = "r300_emit_gpu_flush" #1 0xb738cf2e in r300_emit_dirty_state (r300=0x8090ca0) at r300_emit.c:1450 atom = 0x8090e38 #2 0xb739017e in r300_emit_states (instance_id=-1, index_bias=0, buffer_offset=0, index_buffer=0x0, flags=<optimized out>, r300=0x8090ca0) at r300_render.c:259 indexed = 0 '\000' validate_vbos = <optimized out> emit_states = <optimized out> emit_vertex_arrays = 0 '\000' emit_vertex_arrays_swtcl = 0 '\000' #3 r300_prepare_for_rendering (r300=r300@entry=0x8090ca0, flags=<optimized out>, flags@entry=PREP_EMIT_STATES, index_buffer=0x0, cs_dwords=21, buffer_offset=0, index_bias=0, instance_id=-1) at r300_render.c:311 No locals. #4 0xb7391775 in r300_blitter_draw_rectangle (blitter=0x8062750, x1=0, y1=0, x2=1, y2=1, depth=0, type=UTIL_BLITTER_ATTRIB_COLOR, attrib=0xb76437c0 <color>) at r300_render.c:1141 last_sprite_coord_enable = 0 width = 1 height = 1 vertex_size = <optimized out> dwords = 21 zeros = {f = {0, 0, 0, 0}, i = {0, 0, 0, 0}, ui = {0, 0, 0, 0}} cs_copy = 0xb4b3b008 cs_winsys = <optimized out> cs_count = 0 __func__ = "r300_blitter_draw_rectangle" #5 0xb72da0c4 in util_blitter_clear_custom (blitter=blitter@entry=0x8062750, width=width@entry=1, height=1, num_layers=0, clear_buffers=0, color=0xb76437c0 <color>, depth=0, stencil=0, custom_dsa=0x8064f20, custom_blend=0x0) at util/u_blitter.c:1247 ctx = 0x8062750 pipe = 0x8090ca0 sr = {ref_value = "\000"} #6 0xb72db349 in util_blitter_custom_clear_depth (blitter=0x8062750, width=1, height=1, depth=0, custom_dsa=0x8064f20) at util/u_blitter.c:1273 color = {f = {0, 0, 0, 0}, i = {0, 0, 0, 0}, ui = {0, 0, 0, 0}} #7 0xb73847c7 in r300_decompress_zmask (r300=0x8090ca0) at r300_blit.c:481 fb = 0x807e798 #8 0xb7384eb1 in r300_decompress_zmask_locked_unsafe (r300=0x8090ca0) at r300_blit.c:500 fb = {width = 1, height = 1, nr_cbufs = 0, cbufs = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, zsbuf = 0x81ce978} #9 0xb7384f00 in r300_decompress_zmask_locked (r300=0x8090ca0) at r300_blit.c:509 saved_fb = {width = 900, height = 600, nr_cbufs = 1, cbufs = { 0x81cbde0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, zsbuf = 0x0} #10 0xb739b128 in r300_decompress_depth_textures (r300=0x8090ca0) at r300_state_derived.c:1033 state = 0x8096518 tex = <optimized out> count = 2 i = <optimized out> #11 r300_update_derived_state (r300=0x8090ca0) at r300_state_derived.c:1071 No locals. #12 0xb7391751 in r300_blitter_draw_rectangle (blitter=0x8062750, x1=0, y1=0, x2=960, y2=304, depth=0.600000024, type=UTIL_BLITTER_ATTRIB_COLOR, attrib=0x815ee98) at r300_render.c:1136 last_sprite_coord_enable = 0 width = 960 height = 304 vertex_size = <optimized out> dwords = 21 zeros = {f = {0, 0, 0, 0}, i = {0, 0, 0, 0}, ui = {0, 0, 0, 0}} cs_copy = 0xb4b3b008 cs_winsys = <optimized out> cs_count = 0 __func__ = "r300_blitter_draw_rectangle" #13 0xb72da0c4 in util_blitter_clear_custom (blitter=0x8062750, width=<optimized out>, height=304, num_layers=1, clear_buffers=4, color=0x815ee98, depth=0.60000002384185791, stencil=0, custom_dsa=0x0, custom_blend=0x0) at util/u_blitter.c:1247 ctx = 0x8062750 pipe = 0x8090ca0 sr = {ref_value = "\000"} #14 0xb72db307 in util_blitter_clear (blitter=<optimized out>, width=<optimized out>, height=<optimized out>, num_layers=<optimized out>, clear_buffers=<optimized out>, color=<optimized out>, depth=<optimized out>, stencil=0) at util/u_blitter.c:1263 No locals. #15 0xb7383458 in r300_clear (pipe=0x8090ca0, buffers=4, color=0x815ee98, depth=0.60000002384185791, stencil=0) at r300_blit.c:368 fb = <optimized out> hyperz = 0x80819c0 width = 960 height = 304 hyperz_dcv = 2576980224 __func__ = "r300_clear" #16 0xb71952fb in st_Clear (ctx=0x815dd38, mask=256) at ../../src/mesa/state_tracker/st_cb_clear.c:532 depthRb = <optimized out> stencilRb = <optimized out> quad_buffers = <optimized out> clear_buffers = <optimized out> i = <optimized out> #17 0xb7042fb2 in _mesa_Clear (mask=16384) at ../../src/mesa/main/clear.c:222 bufferMask = 256 ctx = <optimized out> __func__ = "_mesa_Clear" __PRETTY_FUNCTION__ = "_mesa_Clear" #18 0x0804c879 in piglit_display () at /home/Paulie/piglit/tests/texturing/tex-miplevel-selection.c:1429 fetch_level = -1208610337 baselevel = -1073745544 maxlevel = 0 minlod = -1208152064 maxlod = 3 bias = 6 mipfilter = 1 expected_level = 134534584 x = 134533911 y = 33190 total = 0 failed = 1 start_bias = -5 end_bias = 5 end_min_lod = 5 end_max_lod = 5 end_mipfilter = 1 end_fetch_level = 5 #19 0xb7f611f8 in run_test (gl_fw=0x8051008, argc=3, argv=0xbffff2a4) at /home/Paulie/piglit/tests/util/piglit-framework-gl/piglit_fbo_framework.c:52 result = PIGLIT_PASS #20 0xb7f48e5a in piglit_gl_test_run (argc=3, argv=0xbffff2a4, config=0xbffff1b8) at /home/Paulie/piglit/tests/util/piglit-framework-gl.c:151 __PRETTY_FUNCTION__ = "piglit_gl_test_run" #21 0x08049612 in main (argc=3, argv=0xbffff2a4) at /home/Paulie/piglit/tests/texturing/tex-miplevel-selection.c:67 config = {supports_gl_es_version = 0, supports_gl_core_version = 0, supports_gl_compat_version = 10, require_forward_compatible_context = false, require_debug_context = false, window_width = 900, window_height = 600, window_samples = 0, window_visual = 5, requires_displayed_window = false, init = 0x8049667 <piglit_init>, display = 0x804c780 <piglit_display>, subtests = 0x0, selected_subtests = 0x0, num_selected_subtests = 0} __PRETTY_FUNCTION__ = "main" GPU:RV530 Kernel: 3.17.8-300.fc21.i686 Mesa: 5b01512df3328711968dea7240ae817721c79774 Libdrm: eca91cf163d50090db36d0b2abbffcff813a2adf piglit: 25ac42dbd654daee3d5a0cf09a4212c5144eb74b -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 87496] [r300g] Battle.net app window content rotated and stretched
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=87496 Bug ID: 87496 Summary: [r300g] Battle.net app window content rotated and stretched Product: Mesa Version: git Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Drivers/Gallium/r300 Assignee: dri-devel(a)lists.freedesktop.org Reporter: pavel.ondracka(a)email.cz Created attachment 111050 --> https://bugs.freedesktop.org/attachment.cgi?id=111050&action=edit screenshot While the contents of the window seems to be mostly fine, they are composed inside the window in a completely wrong way (screenshot attached). There is a visible line going from top left corner to bottom right and both resulting parts of the window contains rotated and partially stretched content. Trace to reproduce this at: http://pavel.ondracka.cz/battle.net.trace or just get the client at battle.net/app/ and run it with wine. This is not reproducible with llvmpipe. GPU: RV530 Mesa: e06b0778f59980429fececb1aa0de0f0a3f23427 libdrm: 2.4.58-3.fc21 Kernel: 3.17.6-300.fc21.i686 -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 84977] New: r300/compiler: register allocation pass generate invalid swizzle for r300/r400
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=84977 Bug ID: 84977 Summary: r300/compiler: register allocation pass generate invalid swizzle for r300/r400 Product: Mesa Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Drivers/Gallium/r300 Assignee: dri-devel(a)lists.freedesktop.org Reporter: david.heidelberger(a)ixit.cz Created attachment 107808 --> https://bugs.freedesktop.org/attachment.cgi?id=107808&action=edit r300_deadsource.txt Error: Not a native swizzle: 00000fc3 Can be workarounded forcing diff --git a/src/gallium/drivers/r300/compiler/radeon_pair_regalloc.c b/src/gallium/drivers/r300/compiler/radeon_pair_regalloc.c index 14f93fb..5682b55 100644 --- a/src/gallium/drivers/r300/compiler/radeon_pair_regalloc.c +++ b/src/gallium/drivers/r300/compiler/radeon_pair_regalloc.c @@ -432,6 +432,8 @@ static enum rc_reg_class variable_get_class( } } + can_change_writemask = 0; + class_index = find_class(classes, writemask, can_change_writemask ? 3 : 1); done: Seems like if "(!r300_swizzle_is_native_basic(new_swizzle)) {" didn't check this one swizzle (checked by fprintf). Output from register allocation pass compared with can_change_writemask = 0; --- r300_regalloc.txt 2014-10-14 01:51:00.813113749 +0200 +++ r300_regalloc-workaround.txt 2014-10-14 01:51:40.207223071 +0200 @@ -10,20 +10,20 @@ DP3, src0.xyz, src0.xyz DP3 temp[3].w, src0._, src0._ 5: src0.xyz = input[3], src0.w = temp[3] - DP3 temp[7].z, src0.xyz, src0.xyz + DP3 temp[8].x, src0.xyz, src0.xyz RSQ temp[4].w, |src0.w| - 6: src0.xyz = input[6], src1.xyz = temp[7] - DP3 temp[7].z, src0.xyz, src0.xyz - RSQ temp[5].w, |src1.z| - 7: src0.xyz = input[5], src0.w = temp[3] + 6: src0.xyz = input[6], src1.xyz = temp[8] DP3 temp[8].x, src0.xyz, src0.xyz + RSQ temp[5].w, |src1.x| + 7: src0.xyz = input[5], src0.w = temp[3] + DP3 temp[9].x, src0.xyz, src0.xyz MAD temp[3].w, -src0.w, src0.1, src0.1 - 8: src0.w = temp[4], src1.xyz = input[4], src2.xyz = temp[8] + 8: src0.w = temp[4], src1.xyz = input[4], src2.xyz = temp[9] MAD temp[4].xyz, src0.www, src1.xyz, src0.000 RSQ temp[4].w, |src2.x| - 9: src0.xyz = temp[7], src1.xyz = temp[7] + 9: src0.xyz = temp[7], src1.xyz = temp[8] MAD temp[7].xy, src0.xy_, src0.11_, src0.HH_ - RSQ temp[6].w, |src1.z| + RSQ temp[6].w, |src1.x| 10: src0.xyz = input[3], src0.w = temp[5], src2.xyz = temp[4] MAD temp[3].xyz, src0.xyz, src0.www, src2.xyz 11: src0.xyz = input[5], src0.w = temp[4] @@ -38,10 +38,10 @@ 15: src0.xyz = temp[6], src1.xyz = temp[4] DP3_SAT temp[4].x, src0.xyz, src1.xyz 16: src0.xyz = temp[3] - DP3 temp[4].y, src0.xyz, src0.xyz - 17: src0.xyz = temp[5], src1.xyz = const[7], src2.xyz = temp[4] + DP3 temp[7].x, src0.xyz, src0.xyz + 17: src0.xyz = temp[5], src1.xyz = const[7], src2.xyz = temp[7] MAD temp[5].xy, src0.xy_, src1.xx_, src1.yy_ - RSQ temp[5].w, |src2.y| + RSQ temp[5].w, |src2.x| 18: src0.xyz = temp[4], src0.w = input[0], src1.xyz = input[0] MAD temp[0].xyz, src0.xxx, src1.xyz, src0.000 MAD temp[0].w, src0.x, src0.w, src0.0 @@ -53,24 +53,24 @@ DP3_SAT, src0.xyz, src1.xyz DP3_SAT temp[5].w, src0._, src0._ 22: src0.xyz = temp[5], src0.w = const[7], src1.xyz = const[7] - MAD temp[3].x, src0.y__, src1.z__, src0.w__ + MAD temp[3].z, src0.__y, src1.__z, src0.__w MAD temp[6].w, src0.x, src1.z, src0.w 23: src0.xyz = temp[5], src0.w = temp[6], src1.xyz = temp[3], src1.w = const[6] - MAD temp[3].x, src0.y__, src1.x__, src1.w__ + MAD temp[3].z, src0.__y, src1.__z, src1.__w MAD temp[6].w, src0.x, src0.w, src1.w 24: src0.xyz = temp[5], src0.w = temp[6], src1.xyz = temp[3], src2.xyz = const[8] - MAD temp[3].x, src0.y__, src1.x__, src2.x__ + MAD temp[3].z, src0.__y, src1.__z, src2.__x MAD temp[6].w, src0.x, src0.w, src2.x 25: src0.w = temp[5] LG2 temp[5].w, src0.w 26: src0.xyz = temp[5], src0.w = temp[6], src1.xyz = temp[3] - MAD temp[6].x, src0.y__, src1.x__, -src0.H__ + MAD temp[6].z, src0.__y, src1.__z, -src0.__H MAD temp[6].w, src0.x, src0.w, -src0.H 27: src0.xyz = temp[5], src0.w = temp[5], src1.xyz = temp[6], src1.w = temp[6], src2.xyz = const[4] - MAD temp[3].xy, src0.xy_, src1.wx_, src0.11_ + MAD temp[3].xy, src0.xy_, src1.wz_, src0.11_ MAD temp[5].w, src0.w, src2.x, src0.0 28: src0.xyz = temp[3], src0.w = temp[4] - MAD temp[3].x, -src0.x__, src0.1__, src0.y__ + MAD temp[3].y, -src0._x_, src0._1_, src0._y_ MAD temp[4].w, -src0.x, src0.1, src0.w 29: src0.w = temp[5] EX2 temp[5].w, src0.w @@ -78,7 +78,7 @@ MAD temp[1].xyz, src1.www, src1.xyz, src0.000 MAD temp[1].w, src1.w, src0.w, src0.0 31: src0.xyz = temp[3] - RCP temp[5].w, src0.x + RCP temp[5].w, src0.y 32: src0.w = temp[4], src1.w = temp[5] MAD_SAT temp[4].w, src1.w, src0.w, src0.0 33: src0.xyz = const[8], src0.w = temp[4] @@ -110,4 +110,4 @@ MAD temp[0].w, src2.w, srcp.w, src0.0 43: src0.xyz = temp[0], src0.w = temp[0] MAD color[0].xyz, src0.xyz, src0.111, src0.000 - MAD color[0].w, src0.w, src0.1, src0.0 + MAD color[0].w, src0.w, src0.1, src0.0 -- You are receiving this mail because: You are the assignee for the bug.

1 12

[Bug 79997] New: [Dell Inspiron 6400] Laptop screen is turned off, needs shutdown to work again
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=79997 Priority: medium Bug ID: 79997 Assignee: dri-devel(a)lists.freedesktop.org Summary: [Dell Inspiron 6400] Laptop screen is turned off, needs shutdown to work again Severity: normal Classification: Unclassified OS: Linux (All) Reporter: mondane.woodworker(a)gmail.com Hardware: x86 (IA32) Status: NEW Version: unspecified Component: Drivers/Gallium/r300 Product: Mesa [1.] One line summary of the problem: [Dell Inspiron 6400] Laptop screen is turned off, needs shutdown to work again [2.] Full description of the problem/report: Steps to reproduce the problem 10 out of 10 times: - open dash - search for 'term' - start the 'Terminal' - enter the following command: 'dmesg | less' - scroll the text using the cursor keys - within a few lines scrolled, the screen goes black [3.] Keywords (i.e., modules, networking, kernel): [4.] Kernel version (from /proc/version): Linux version 3.15.0-031500-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201406111300 SMP Wed Jun 11 17:22:16 UTC 2014 [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) [6.] A small shell script or example program which triggers the problem (if possible) [7.] Environment Description: Ubuntu 13.10 Release: 13.10 [7.1.] Software (add the output of the ver_linux script here) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux susan-MM061 3.15.0-031500-generic #201406111300 SMP Wed Jun 11 17:22:16 UTC 2014 i686 i686 i686 GNU/Linux Gnu C 4.8 Gnu make 3.81 binutils 2.23.52.20130913 util-linux 2.20.1 mount support module-init-tools 9 e2fsprogs 1.42.8 pcmciautils 018 PPP 2.4.5 Linux C Library 2.17 Dynamic linker (ldd) 2.17 Procps 3.3.3 Net-tools 1.60 Kbd 1.15.5 Sh-utils 8.20 wireless-tools 30 Modules Loaded ctr ccm parport_pc ppdev bnep rfcomm bluetooth 6lowpan_iphc binfmt_misc gpio_ich dell_wmi joydev sparse_keymap dell_laptop dcdbas coretemp snd_hda_codec_idt radeon snd_hda_codec_generic snd_hda_intel arc4 snd_hda_controller kvm snd_hda_codec iwl3945 snd_hwdep iwlegacy snd_pcm mac80211 snd_seq_midi snd_seq_midi_event r852 snd_rawmidi sm_common ttm snd_seq nand drm_kms_helper cfg80211 microcode nand_ecc snd_seq_device drm snd_timer nand_bch snd bch psmouse i2c_algo_bit soundcore nand_ids mtd serio_raw lpc_ich r592 mac_hid memstick wmi lp video parport b44 firewire_ohci ssb firewire_core sdhci_pci crc_itu_t sdhci mii [7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2300 @ 1.66GHz stepping : 8 microcode : 0x39 cpu MHz : 1000.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dtherm bogomips : 3324.88 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2300 @ 1.66GHz stepping : 8 microcode : 0x39 cpu MHz : 1000.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dtherm bogomips : 3324.88 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: [7.3.] Module information (from /proc/modules): ctr 13025 1 - Live 0x00000000 ccm 17562 1 - Live 0x00000000 parport_pc 32154 0 - Live 0x00000000 ppdev 17423 0 - Live 0x00000000 bnep 19107 2 - Live 0x00000000 rfcomm 59300 0 - Live 0x00000000 bluetooth 401303 10 bnep,rfcomm, Live 0x00000000 6lowpan_iphc 18480 1 bluetooth, Live 0x00000000 binfmt_misc 13172 1 - Live 0x00000000 gpio_ich 13364 0 - Live 0x00000000 dell_wmi 12601 0 - Live 0x00000000 joydev 17311 0 - Live 0x00000000 sparse_keymap 13658 1 dell_wmi, Live 0x00000000 dell_laptop 17931 0 - Live 0x00000000 dcdbas 14521 1 dell_laptop, Live 0x00000000 coretemp 13358 0 - Live 0x00000000 snd_hda_codec_idt 49650 1 - Live 0x00000000 radeon 1484159 2 - Live 0x00000000 snd_hda_codec_generic 63743 2 snd_hda_codec_idt, Live 0x00000000 snd_hda_intel 29400 3 - Live 0x00000000 arc4 12509 2 - Live 0x00000000 snd_hda_controller 30246 1 snd_hda_intel, Live 0x00000000 kvm 400477 0 - Live 0x00000000 snd_hda_codec 121022 4 snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller, Live 0x00000000 iwl3945 64660 0 - Live 0x00000000 snd_hwdep 13276 1 snd_hda_codec, Live 0x00000000 iwlegacy 88297 1 iwl3945, Live 0x00000000 snd_pcm 96792 3 snd_hda_intel,snd_hda_controller,snd_hda_codec, Live 0x00000000 mac80211 573480 2 iwl3945,iwlegacy, Live 0x00000000 snd_seq_midi 13324 0 - Live 0x00000000 snd_seq_midi_event 14475 1 snd_seq_midi, Live 0x00000000 r852 17822 0 - Live 0x00000000 snd_rawmidi 25518 1 snd_seq_midi, Live 0x00000000 sm_common 16772 1 r852, Live 0x00000000 ttm 77856 1 radeon, Live 0x00000000 snd_seq 56978 2 snd_seq_midi,snd_seq_midi_event, Live 0x00000000 nand 67553 2 r852,sm_common, Live 0x00000000 drm_kms_helper 49335 1 radeon, Live 0x00000000 cfg80211 435387 3 iwl3945,iwlegacy,mac80211, Live 0x00000000 microcode 19509 0 - Live 0x00000000 nand_ecc 13136 1 nand, Live 0x00000000 snd_seq_device 14137 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x00000000 drm 251142 5 radeon,ttm,drm_kms_helper, Live 0x00000000 snd_timer 29035 2 snd_pcm,snd_seq, Live 0x00000000 nand_bch 13067 1 nand, Live 0x00000000 snd 61616 16 snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer, Live 0x00000000 bch 21767 1 nand_bch, Live 0x00000000 psmouse 97425 0 - Live 0x00000000 i2c_algo_bit 13316 1 radeon, Live 0x00000000 soundcore 12600 2 snd_hda_codec,snd, Live 0x00000000 nand_ids 8547 1 nand, Live 0x00000000 mtd 52953 2 sm_common,nand, Live 0x00000000 serio_raw 13251 0 - Live 0x00000000 lpc_ich 17000 0 - Live 0x00000000 r592 17829 0 - Live 0x00000000 mac_hid 13099 0 - Live 0x00000000 memstick 16176 1 r592, Live 0x00000000 wmi 18843 1 dell_wmi, Live 0x00000000 lp 13359 0 - Live 0x00000000 video 19348 0 - Live 0x00000000 parport 40945 3 parport_pc,ppdev,lp, Live 0x00000000 b44 39820 0 - Live 0x00000000 firewire_ohci 36248 0 - Live 0x00000000 ssb 56649 1 b44, Live 0x00000000 firewire_core 62418 1 firewire_ohci, Live 0x00000000 sdhci_pci 18677 0 - Live 0x00000000 crc_itu_t 12627 1 firewire_core, Live 0x00000000 sdhci 38093 1 sdhci_pci, Live 0x00000000 mii 13693 1 b44, Live 0x00000000 [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:1f.2 0170-0177 : ata_piix 01f0-01f7 : 0000:00:1f.2 01f0-01f7 : ata_piix 0376-0376 : 0000:00:1f.2 0376-0376 : ata_piix 03c0-03df : vesafb 03f6-03f6 : 0000:00:1f.2 03f6-03f6 : ata_piix 04d0-04d1 : pnp 00:01 0809-0809 : pnp 00:02 0910-091f : pnp 00:07 0920-092f : pnp 00:07 0930-097f : pnp 00:07 0cb0-0cbf : pnp 00:07 0cf8-0cff : PCI conf1 1000-1003 : ACPI PM1a_EVT_BLK 1004-1005 : ACPI PM1a_CNT_BLK 1008-100b : ACPI PM_TMR 1010-1015 : ACPI CPU throttle 1020-1020 : ACPI PM2_CNT_BLK 1028-102f : gpio_ich 1028-102f : ACPI GPE0_BLK 1030-1033 : iTCO_wdt 1060-107f : iTCO_wdt 1080-10bf : gpio_ich 1080-10bf : 0000:00:1f.0 1080-10bf : pnp 00:02 1080-10af : gpio_ich 10b0-10bf : gpio_ich 10c0-10df : 0000:00:1f.3 10c0-10df : pnp 00:02 2000-2fff : PCI Bus 0000:0b bf20-bf3f : 0000:00:1d.3 bf20-bf3f : uhci_hcd bf40-bf5f : 0000:00:1d.2 bf40-bf5f : uhci_hcd bf60-bf7f : 0000:00:1d.1 bf60-bf7f : uhci_hcd bf80-bf9f : 0000:00:1d.0 bf80-bf9f : uhci_hcd bfa0-bfaf : 0000:00:1f.2 bfa0-bfaf : ata_piix d000-dfff : PCI Bus 0000:0c e000-efff : PCI Bus 0000:01 ee00-eeff : 0000:01:00.0 f400-f4fe : pnp 00:02 00000000-00000fff : reserved 00001000-0009efff : System RAM 0009f000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cffff : Video ROM 000f0000-000fffff : System ROM 00100000-3fed33ff : System RAM 01000000-016ad158 : Kernel code 016ad159-01a36dff : Kernel data 01b1c000-01c00fff : Kernel bss 3fed3400-3fffffff : reserved 3fed3400-3fefffff : pnp 00:00 3ff00000-3fffffff : pnp 00:00 40000000-401fffff : PCI Bus 0000:0b d0000000-dfffffff : PCI Bus 0000:01 d0000000-dfffffff : 0000:01:00.0 e0000000-e01fffff : PCI Bus 0000:0c ef900000-ef9fffff : PCI Bus 0000:03 ef9fd400-ef9fd4ff : 0000:03:01.1 ef9fd400-ef9fd4ff : mmc0 ef9fd600-ef9fd6ff : 0000:03:01.2 ef9fd600-ef9fd6ff : r592 ef9fd700-ef9fd7ff : 0000:03:01.3 ef9fd700-ef9fd7ff : r852 ef9fd800-ef9fdfff : 0000:03:01.0 ef9fd800-ef9fdfff : firewire_ohci ef9fe000-ef9fffff : 0000:03:00.0 ef9fe000-ef9fffff : b44 efa00000-efbfffff : PCI Bus 0000:0c efc00000-efcfffff : PCI Bus 0000:0b efcff000-efcfffff : 0000:0b:00.0 efcff000-efcfffff : iwl3945 efd00000-efefffff : PCI Bus 0000:01 efd00000-efd1ffff : 0000:01:00.0 efdf0000-efdfffff : 0000:01:00.0 efffc000-efffffff : 0000:00:1b.0 efffc000-efffffff : ICH HD audio f0000000-f4006fff : reserved f0000000-f3ffffff : PCI MMCONFIG 0000 [bus 00-3f] f0000000-f3ffffff : pnp 00:00 f4000000-f4003fff : pnp 00:00 f4004000-f4004fff : pnp 00:00 f4005000-f4005fff : pnp 00:00 f4006000-f4006fff : pnp 00:00 f4008000-f400bfff : reserved f4008000-f400bfff : pnp 00:00 f400b410-f400b414 : iTCO_wdt fec00000-fec0ffff : reserved fec00000-fec003ff : IOAPIC 0 fed00000-fed003ff : HPET 0 fed00000-fed003ff : pnp 00:0a fed20000-fed9ffff : reserved fed20000-fed9ffff : pnp 00:00 fee00000-fee0ffff : reserved fee00000-fee0ffff : pnp 00:00 fee00000-fee00fff : Local APIC ffa80000-ffa803ff : 0000:00:1d.7 ffa80000-ffa803ff : ehci_hcd ffb00000-ffffffff : reserved ffb00000-ffffffff : pnp 00:00 [7.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=09 <?> 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: efd00000-efefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Dell Device 01bd Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4191 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 75.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f4005000 Kernel driver in use: pcieport 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4142 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f4008000 Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: efc00000-efcfffff Prefetchable memory behind bridge: 0000000040000000-00000000401fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41a1 Capabilities: [90] Subsystem: Dell Device 01bd Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f4008001 Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efa00000-efbfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #5, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41c1 Capabilities: [90] Subsystem: Dell Device 01bd Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=04 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000f4008001 Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 01bd Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 01bd Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 01bd Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 01bd Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: ef900000-ef9fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device 01bd 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) Subsystem: Dell Device 01bd Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) (prog-if 80 [Master]) Subsystem: Dell Device 01bd Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) Subsystem: Dell Device 01bd Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 10c0 [size=32] 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515/M52 [Mobility Radeon X1300] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel driver in use: radeon 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Inspiron 6400 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: b44 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10 [OHCI]) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+ Kernel driver in use: firewire_ohci 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: sdhci-pci 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: r592 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Subsystem: Dell Device 01bd Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd700 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: r852 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Subsystem: Intel Corporation Device 1021 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at efcff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4122 Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-13-02-ff-ff-37-b7-69 Kernel driver in use: iwl3945 [7.6.] SCSI information (from /proc/scsi/scsi) Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: TOSHIBA MK8032GS Rev: AS11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Optiarc Model: DVD+-RW AD-5540A Rev: 103C Type: CD-ROM ANSI SCSI revision: 05 [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): 1 1111 140 1713 26 358 57 802 921 dma loadavg softirqs 10 1143 1447 1714 261 36 59 809 927 driver locks stat 1034 1175 1449 18 267 366 6 81 942 execdomains mdstat swaps 1043 1178 1465 1838 27 37 653 816 962 fb meminfo sys 1046 12 1478 1839 28 372 684 817 971 filesystems misc sysrq-trigger 1060 1279 1484 1846 29 381 685 820 975 fs modules sysvipc 1065 1282 1493 19 3 384 686 852 acpi interrupts mounts timer_list 1070 1291 15 1900 30 447 7 856 asound iomem mtd timer_stats 1071 1292 1589 2 309 49 725 868 buddyinfo ioports mtrr tty 1073 1293 1598 20 31 5 751 874 bus irq net uptime 1077 13 16 2038 32 50 777 881 cgroups kallsyms pagetypeinfo version 1080 130 1611 2044 320 51 78 896 cmdline kcore partitions vmallocinfo 1084 1305 1615 21 33 52 780 9 consoles key-users sched_debug vmstat 1088 131 1621 22 34 524 781 916 cpuinfo kmsg schedstat zoneinfo 1098 1328 1624 23 35 53 79 917 crypto kpagecount scsi 11 1382 1653 24 350 54 798 919 devices kpageflags self 1101 139 17 25 354 563 8 920 diskstats latency_stats slabinfo [X.] Other notes, patches, fixes, workarounds: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1247624 -- You are receiving this mail because: You are the assignee for the bug.

1 5

[Bug 76157] New: Gnome-shell 3.10 has distorted artifacts and fonts with Gallium driver (running on Dell XT with Radeon Xpress 1250 graphics card)
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=76157 Priority: medium Bug ID: 76157 Assignee: dri-devel(a)lists.freedesktop.org Summary: Gnome-shell 3.10 has distorted artifacts and fonts with Gallium driver (running on Dell XT with Radeon Xpress 1250 graphics card) Severity: major Classification: Unclassified OS: Linux (All) Reporter: jdrichards9(a)gmail.com Hardware: x86-64 (AMD64) Status: NEW Version: unspecified Component: Drivers/Gallium/radeonsi Product: Mesa Created attachment 95774 --> https://bugs.freedesktop.org/attachment.cgi?id=95774&action=edit Gnome-shell 3.8 with artifacts distortions and distorted font. I was using Ubuntu GNOME 13.10 at the time with Gnome 3.8, but this problem also applies to any Ubuntu OS past version 12.04. When I try to run or install Ubuntu or Ubuntu GNOME 13.10 on my Dell XT with Radeon Xpress 1250, the font is distorted and miscellaneous graphical components are distorted on the interface. I'm assuming it could be an issue with hardware acceleration, as I'm running Linux Mint with the MATE desktop Environment, and I have no issues. When I try installing the proprietary ATI/AMD driver in attempts to resolve the issue, the OS glitches entirely, and I'm forced to reinstall. If the Gallium driver could be fixed to support the Radeon Xpress 1250 graphics card with GNOME 3.10/3.12, I'd greatly appreciate it. Thanks so much for your time and all your hard work. -- You are receiving this mail because: You are the assignee for the bug.

1 5

[Bug 75794] New: Accumulation of black squares with OpenGL applications at high resolutions
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=75794 Priority: medium Bug ID: 75794 Assignee: dri-devel(a)lists.freedesktop.org Summary: Accumulation of black squares with OpenGL applications at high resolutions Severity: normal Classification: Unclassified OS: Linux (All) Reporter: l.mollari(a)gmx.net Hardware: x86-64 (AMD64) Status: NEW Version: 9.1 Component: Drivers/Gallium/r300 Product: Mesa Created attachment 95154 --> https://bugs.freedesktop.org/attachment.cgi?id=95154&action=edit glxgears with artifacts I am having trouble with black areas made up by 8 × 8 pixel squares that occur in 3D enabled applications when using the build-in TFTs native resolution of 1920 × 1200. Lower resolutions are not affected (see attached screenshots [1] and [2]). The shape of these areas is sensitive to the actual content drawn in such a way that it acts like a shadow or an impression of the actual 3D geometry and even of 2D HUDs in 3D enabled games. These artifacts are persistent across different applications i. e. the current application inherits the artifacts from the previous one and vice versa [4]. I have uploaded a video showing the artifacts described in 0 A. D.: https://www.youtube.com/watch?v=Rpu-s8DowFw I narrowed the glitches down to Mesa 3D version 9.1 that seemingly introduced the bug. The bug seems to be still present in the most recent Mesa 3D and Linux kernel versions [6]. Damaged hardware is unlikely to be the cause for these glitches since I was able to reproduce the same artifacts on three different laptops of the same product line, all equipped with the same GPU. All tests were performed with unaltered default settings of the respective distributions. No manually touched or customized xorg.conf files or kernel mode settings were in place. -- You are receiving this mail because: You are the assignee for the bug.

1 15

[Bug 75128] New: Artifacts
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=75128 Priority: medium Bug ID: 75128 Assignee: dri-devel(a)lists.freedesktop.org Summary: Artifacts Severity: normal Classification: Unclassified OS: All Reporter: publicface(a)bak.rr.com Hardware: Other Status: NEW Version: unspecified Component: Drivers/Gallium/r300 Product: Mesa Gallium 0.4 on ATI RV370 >From time to time artifacts in the form of dialog boxes appear and won't go away. Ubuntu 12.04 with kubuntu-desktop -- You are receiving this mail because: You are the assignee for the bug.

1 19

[Bug 71681] New: some artefacts on X1250 with desktop elements drawn badly and screen blinks
by bugzilla-daemon＠freedesktop.org 18 Sep '19

18 Sep '19

https://bugs.freedesktop.org/show_bug.cgi?id=71681 Priority: medium Bug ID: 71681 Assignee: dri-devel(a)lists.freedesktop.org Summary: some artefacts on X1250 with desktop elements drawn badly and screen blinks Severity: normal Classification: Unclassified OS: Linux (All) Reporter: postman31(a)gmail.com Hardware: x86 (IA32) Status: NEW Version: 9.2 Component: Drivers/Gallium/r300 Product: Mesa Created attachment 89327 --> https://bugs.freedesktop.org/attachment.cgi?id=89327&action=edit stripes at the top badly drawn desktop elements (constant stripes at the top of the screen). video play in browser or fast scroll cause blinking (couldn't take screenshot with PrtSc) Linux HomeUbu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 i686 i686 GNU/Linux Ubuntu 13.10 OpenGL version string: 2.1 Mesa 9.2.1 -- You are receiving this mail because: You are the assignee for the bug.

1 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel January 2016