dri-devel June 2016

dri-devel@lists.freedesktop.org

231 participants
1446 discussions

[PATCH] drm/vc4: Make pageflip completion handling more robust.
by Mario Kleiner 02 Jun '16

02 Jun '16

Protect both the setup of the pageflip event and the latching of the new requested displaylist head pointer by the event lock, so we can't get into a situation where vc4_atomic_flush latches the new display list via HVS_WRITE, then immediately gets preempted before queueing the pageflip event, then the page-flip completes in hw and the vc4_crtc_handle_page_flip() runs and no-ops due to lack of a pending pageflip event, then vc4_atomic_flush continues and only then queues the pageflip event - after the page flip handling already no-oped. This would cause flip completion handling only at the next vblank - one frame too late. In vc4_crtc_handle_page_flip() check the actual DL head pointer in SCALER_DISPLACTX against the requested pointer for page flip to make sure that the flip actually really completed in the current vblank and doesn't get deferred to the next one because the DL head pointer was written a bit too late into SCALER_DISPLISTX, after start of vblank, and missed the boat. This avoids handling a pageflip completion too early - one frame too early. According to Eric, DL head pointer updates which were written into the HVS DISPLISTX reg get committed to hardware at the last pixel of active scanout. Our vblank interrupt handler, as triggered by PV_INT_VFP_START irq, gets to run earliest at the first pixel of HBLANK at the end of the last scanline of active scanout, ie. vblank irq handling runs at least 1 pixel duration after a potential pageflip completion happened in hardware. This ordering of events in the hardware, together with the lock protection and SCALER_DISPLACTX sampling of this patch, guarantees that pageflip completion handling only runs at exactly the vblank irq of actual pageflip completion in all cases. Background info from Eric about the relative timing of HVS, PV's and trigger points for interrupts, DL updates: https://lists.freedesktop.org/archives/dri-devel/2016-May/107510.html Tested on RPi 2B with hardware timing measurement equipment and shown to no longer complete flips too early or too late. Signed-off-by: Mario Kleiner <mario.kleiner.de(a)gmail.com> Cc: Eric Anholt <eric(a)anholt.net> --- drivers/gpu/drm/vc4/vc4_crtc.c | 28 ++++++++++++++++++---------- drivers/gpu/drm/vc4/vc4_regs.h | 4 ++++ 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index c34f2bb..1981ca3 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -456,14 +456,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size); - HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), - vc4_state->mm.start); - - if (debug_dump_regs) { - DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc)); - vc4_hvs_dump_state(dev); - } - if (crtc->state->event) { unsigned long flags; @@ -473,8 +465,20 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, spin_lock_irqsave(&dev->event_lock, flags); vc4_crtc->event = crtc->state->event; - spin_unlock_irqrestore(&dev->event_lock, flags); crtc->state->event = NULL; + + HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), + vc4_state->mm.start); + + spin_unlock_irqrestore(&dev->event_lock, flags); + } else { + HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), + vc4_state->mm.start); + } + + if (debug_dump_regs) { + DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc)); + vc4_hvs_dump_state(dev); } } @@ -500,10 +504,14 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) { struct drm_crtc *crtc = &vc4_crtc->base; struct drm_device *dev = crtc->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state); + u32 chan = vc4_crtc->channel; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); - if (vc4_crtc->event) { + if (vc4_crtc->event && + (vc4_state->mm.start == HVS_READ(SCALER_DISPLACTX(chan)))) { drm_crtc_send_vblank_event(crtc, vc4_crtc->event); vc4_crtc->event = NULL; drm_crtc_vblank_put(crtc); diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h index 6163b95..f99eece 100644 --- a/drivers/gpu/drm/vc4/vc4_regs.h +++ b/drivers/gpu/drm/vc4/vc4_regs.h @@ -341,6 +341,10 @@ #define SCALER_DISPLACT0 0x00000030 #define SCALER_DISPLACT1 0x00000034 #define SCALER_DISPLACT2 0x00000038 +#define SCALER_DISPLACTX(x) (SCALER_DISPLACT0 + \ + (x) * (SCALER_DISPLACT1 - \ + SCALER_DISPLACT0)) + #define SCALER_DISPCTRL0 0x00000040 # define SCALER_DISPCTRLX_ENABLE BIT(31) # define SCALER_DISPCTRLX_RESET BIT(30) -- 2.7.0

2 1

[PATCH] drm/omap: rename panel/encoder Kconfig names
by Tomi Valkeinen 02 Jun '16

02 Jun '16

omapdrm is using much too generic Kconfig names for its panels and encoders. Rename them to have "DRM_OMAP" in the name. Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ti.com> --- drivers/gpu/drm/omapdrm/displays/Kconfig | 28 ++++++++++++++-------------- drivers/gpu/drm/omapdrm/displays/Makefile | 28 ++++++++++++++-------------- 2 files changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/displays/Kconfig b/drivers/gpu/drm/omapdrm/displays/Kconfig index 2a618afe0f53..c226da145fb3 100644 --- a/drivers/gpu/drm/omapdrm/displays/Kconfig +++ b/drivers/gpu/drm/omapdrm/displays/Kconfig @@ -1,80 +1,80 @@ menu "OMAPDRM External Display Device Drivers" -config DISPLAY_ENCODER_OPA362 +config DRM_OMAP_ENCODER_OPA362 tristate "OPA362 external analog amplifier" help Driver for OPA362 external analog TV amplifier controlled through a GPIO. -config DISPLAY_ENCODER_TFP410 +config DRM_OMAP_ENCODER_TFP410 tristate "TFP410 DPI to DVI Encoder" help Driver for TFP410 DPI to DVI encoder. -config DISPLAY_ENCODER_TPD12S015 +config DRM_OMAP_ENCODER_TPD12S015 tristate "TPD12S015 HDMI ESD protection and level shifter" help Driver for TPD12S015, which offers HDMI ESD protection and level shifting. -config DISPLAY_CONNECTOR_DVI +config DRM_OMAP_CONNECTOR_DVI tristate "DVI Connector" depends on I2C help Driver for a generic DVI connector. -config DISPLAY_CONNECTOR_HDMI +config DRM_OMAP_CONNECTOR_HDMI tristate "HDMI Connector" help Driver for a generic HDMI connector. -config DISPLAY_CONNECTOR_ANALOG_TV +config DRM_OMAP_CONNECTOR_ANALOG_TV tristate "Analog TV Connector" help Driver for a generic analog TV connector. -config DISPLAY_PANEL_DPI +config DRM_OMAP_PANEL_DPI tristate "Generic DPI panel" help Driver for generic DPI panels. -config DISPLAY_PANEL_DSI_CM +config DRM_OMAP_PANEL_DSI_CM tristate "Generic DSI Command Mode Panel" depends on BACKLIGHT_CLASS_DEVICE help Driver for generic DSI command mode panels. -config DISPLAY_PANEL_SONY_ACX565AKM +config DRM_OMAP_PANEL_SONY_ACX565AKM tristate "ACX565AKM Panel" depends on SPI && BACKLIGHT_CLASS_DEVICE help This is the LCD panel used on Nokia N900 -config DISPLAY_PANEL_LGPHILIPS_LB035Q02 +config DRM_OMAP_PANEL_LGPHILIPS_LB035Q02 tristate "LG.Philips LB035Q02 LCD Panel" depends on SPI help LCD Panel used on the Gumstix Overo Palo35 -config DISPLAY_PANEL_SHARP_LS037V7DW01 +config DRM_OMAP_PANEL_SHARP_LS037V7DW01 tristate "Sharp LS037V7DW01 LCD Panel" depends on BACKLIGHT_CLASS_DEVICE help LCD Panel used in TI's SDP3430 and EVM boards -config DISPLAY_PANEL_TPO_TD028TTEC1 +config DRM_OMAP_PANEL_TPO_TD028TTEC1 tristate "TPO TD028TTEC1 LCD Panel" depends on SPI help LCD panel used in Openmoko. -config DISPLAY_PANEL_TPO_TD043MTEA1 +config DRM_OMAP_PANEL_TPO_TD043MTEA1 tristate "TPO TD043MTEA1 LCD Panel" depends on SPI help LCD Panel used in OMAP3 Pandora -config DISPLAY_PANEL_NEC_NL8048HL11 +config DRM_OMAP_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 Panel" depends on SPI depends on BACKLIGHT_CLASS_DEVICE diff --git a/drivers/gpu/drm/omapdrm/displays/Makefile b/drivers/gpu/drm/omapdrm/displays/Makefile index 9aa176bfbf2e..46baafb1a83e 100644 --- a/drivers/gpu/drm/omapdrm/displays/Makefile +++ b/drivers/gpu/drm/omapdrm/displays/Makefile @@ -1,14 +1,14 @@ -obj-$(CONFIG_DISPLAY_ENCODER_OPA362) += encoder-opa362.o -obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o -obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o -obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o -obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o -obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o -obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o -obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o -obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o -obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o -obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o -obj-$(CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o -obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o -obj-$(CONFIG_DISPLAY_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o +obj-$(CONFIG_DRM_OMAP_ENCODER_OPA362) += encoder-opa362.o +obj-$(CONFIG_DRM_OMAP_ENCODER_TFP410) += encoder-tfp410.o +obj-$(CONFIG_DRM_OMAP_ENCODER_TPD12S015) += encoder-tpd12s015.o +obj-$(CONFIG_DRM_OMAP_CONNECTOR_DVI) += connector-dvi.o +obj-$(CONFIG_DRM_OMAP_CONNECTOR_HDMI) += connector-hdmi.o +obj-$(CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV) += connector-analog-tv.o +obj-$(CONFIG_DRM_OMAP_PANEL_DPI) += panel-dpi.o +obj-$(CONFIG_DRM_OMAP_PANEL_DSI_CM) += panel-dsi-cm.o +obj-$(CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o +obj-$(CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o +obj-$(CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o +obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o +obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o +obj-$(CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o -- 2.5.0

2 1

[PATCH 1/6] drm/doc: Update kerneldoc for drm_crtc.h
by Daniel Vetter 02 Jun '16

02 Jun '16

Apparently not everyone has been super dutiful with updating this stuff. I still decided to leave out the documentation for all the *_property pointers we have in drm_mode_config. Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> --- include/drm/drm_crtc.h | 80 ++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 67 insertions(+), 13 deletions(-) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index c0edd87fa0ee..aa3f7ea41b1b 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -315,6 +315,7 @@ struct drm_plane_helper_funcs; * update to ensure framebuffer cleanup isn't done too early * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings * @mode: current mode timings + * @mode_blob: &drm_property_blob for @mode * @degamma_lut: Lookup table for converting framebuffer pixel data * before apply the conversion matrix * @ctm: Transformation matrix @@ -709,6 +710,7 @@ struct drm_crtc_funcs { * @dev: parent DRM device * @port: OF node used by drm_of_find_possible_crtcs() * @head: list management + * @name: human readable name, can be set by the driver * @mutex: per-CRTC locking * @base: base KMS object for ID tracking etc. * @primary: primary plane for this CRTC @@ -736,12 +738,13 @@ struct drm_crtc { char *name; - /* - * crtc mutex + /** + * @mutex: * * This provides a read lock for the overall crtc state (mode, dpms * state, ...) and a write lock for everything which can be update - * without a full modeset (fb, cursor data, ...) + * without a full modeset (fb, cursor data, crtc properties ...). Full + * modeset also need to grab dev->mode_config.connection_mutex. */ struct drm_modeset_lock mutex; @@ -1149,6 +1152,7 @@ struct drm_encoder { * @head: list management * @base: base KMS object * @name: connector name + * @connector_id: compacted connector id useful indexing arrays * @connector_type: one of the %DRM_MODE_CONNECTOR_<foo> types from drm_mode.h * @connector_type_id: index into connector type enum * @interlace_allowed: can this connector handle interlaced modes? @@ -1161,7 +1165,6 @@ struct drm_encoder { * @funcs: connector control functions * @edid_blob_ptr: DRM property containing EDID if present * @properties: property tracking for this connector - * @path_blob_ptr: DRM blob property data for the DP MST path property * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling * @dpms: current dpms state * @helper_private: mid-layer private data @@ -1224,8 +1227,23 @@ struct drm_connector { struct drm_property_blob *edid_blob_ptr; struct drm_object_properties properties; + /** + * @path_blob_ptr: + * + * DRM blob property data for the DP MST path property. + */ struct drm_property_blob *path_blob_ptr; + /** + * @tile_blob_ptr: + * + * DRM blob property data for the tile property (used mostly by DP MST). + * This is meant for screens which are driven through separate display + * pipelines represented by &drm_crtc, which might not be in running + * with genlocked clocks. For tiled panels which are genlocked, like + * dual-link LVDS or dual-link DSI, the driver should try to not expose + * the tiling and virtual both &drm_crtc and &drm_plane if needed. + */ struct drm_property_blob *tile_blob_ptr; uint8_t polled; /* DRM_CONNECTOR_POLL_* */ @@ -1287,6 +1305,7 @@ struct drm_connector { * plane (in 16.16) * @src_w: width of visible portion of plane (in 16.16) * @src_h: height of visible portion of plane (in 16.16) + * @rotation: rotation of the plane * @state: backpointer to global drm_atomic_state */ struct drm_plane_state { @@ -1527,6 +1546,7 @@ enum drm_plane_type { * struct drm_plane - central DRM plane control structure * @dev: DRM device this plane belongs to * @head: for list management + * @name: human readable name, can be set by the driver * @base: base mode object * @possible_crtcs: pipes this plane can be bound to * @format_types: array of formats supported by this plane @@ -1540,6 +1560,7 @@ enum drm_plane_type { * @properties: property tracking for this plane * @type: type of plane (overlay, primary, cursor) * @state: current atomic state for this plane + * @helper_private: mid-layer private data */ struct drm_plane { struct drm_device *dev; @@ -1547,6 +1568,13 @@ struct drm_plane { char *name; + /** + * @mutex: + * + * Protects modeset plane state, together with the mutex of &drm_crtc + * this plane is linked to (when active, getting actived or getting + * disabled). + */ struct drm_modeset_lock mutex; struct drm_mode_object base; @@ -1719,6 +1747,10 @@ struct drm_bridge { /** * struct drm_crtc_commit - track modeset commits on a CRTC + * + * This structure is used to track asynchronously running atomic commit + * operations. For an implementation of how to use this look at + * drm_atomic_helper_setup_commit() from the atomic helper library. */ struct drm_crtc_commit { /** @@ -1764,7 +1796,7 @@ struct drm_crtc_commit { struct completion hw_done; /** - * cleanup_done: + * @cleanup_done: * * Will be signalled after old buffers have been cleaned up again by * calling drm_atomic_helper_cleanup_planes(). Since this can only @@ -1813,7 +1845,6 @@ struct __drm_connnectors_state { * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL. * @planes: pointer to array of structures with per-plane data * @crtcs: pointer to array of CRTC pointers - * @crtc_states: pointer to array of CRTC states pointers * @num_connector: size of the @connectors and @connector_states arrays * @connectors: pointer to array of structures with per-connector data * @acquire_ctx: acquire context for this atomic modeset state update @@ -2137,8 +2168,6 @@ struct drm_mode_config_funcs { * @connection_mutex: ww mutex protecting connector state and routing * @acquire_ctx: global implicit acquire context used by atomic drivers for * legacy IOCTLs - * @idr_mutex: mutex for KMS ID allocation and management - * @crtc_idr: main KMS ID tracking object * @fb_lock: mutex to protect fb state and lists * @num_fb: number of fbs available * @fb_list: list of framebuffers available @@ -2160,6 +2189,7 @@ struct drm_mode_config_funcs { * @fb_base: base address of the framebuffer * @poll_enabled: track polling support for this device * @poll_running: track polling status for this device + * @delayed_event: track delayed poll uevent deliver for this device * @output_poll_work: delayed work for polling in process context * @property_blob_list: list of all the blob property objects * @blob_lock: mutex for blob property allocation and management @@ -2188,10 +2218,30 @@ struct drm_mode_config { struct mutex mutex; /* protects configuration (mode lists etc.) */ struct drm_modeset_lock connection_mutex; /* protects connector->encoder and encoder->crtc links */ struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ - struct mutex idr_mutex; /* for IDR management */ - struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ - struct idr tile_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ - /* this is limited to one for now */ + + /** + * @idr_mutex: + * + * Mutex for KMS ID allocation and management. Protects both @crtc_idr + * and @tile_idr. + */ + struct mutex idr_mutex; + + /** + * @crtc_idr: + * + * Main KMS ID tracking object. Use this idr for all IDs, fb, crtc, + * connector, modes - just makes life easier to have only one. + */ + struct idr crtc_idr; + + /** + * @tile_idr: + * + * Use this idr for allocating new IDs for tiled sinks like use in some + * high-res DP MST screens. + */ + struct idr tile_idr; struct mutex fb_lock; /* proctects global and per-file fb lists */ int num_fb; @@ -2293,7 +2343,11 @@ struct drm_mode_config { /* whether async page flip is supported or not */ bool async_page_flip; - /* whether the driver supports fb modifiers */ + /** + * @allow_fb_modifiers: + * + * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call. + */ bool allow_fb_modifiers; /* cursor size */ -- 2.8.1

5 17

[PATCH] drm: Store the plane's index
by Chris Wilson 02 Jun '16

02 Jun '16

Currently the plane's index is determined by walking the list of all planes in the mode and finding the position of that plane in the list. A linear walk, especially a linear walk within a linear walk as frequently conceived by i915.ko [O(N^2)] quickly comes to dominate profiles. The plane's index is constant for as long as no earlier planes are removed from the list. For most drivers, planes are static, determined at boot and then untouched until shutdown. Storing the index upon construction and then only walking the tail upon removal should be a major improvement for all. Signed-off-by: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Matt Roper <matthew.d.roper(a)intel.com> --- drivers/gpu/drm/drm_crtc.c | 38 +++++++++----------------------------- include/drm/drm_crtc.h | 6 +++++- 2 files changed, 14 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 3a0384cce4a2..00ee01126b6f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1302,7 +1302,7 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, plane->type = type; list_add_tail(&plane->head, &config->plane_list); - config->num_total_plane++; + plane->index = config->num_total_plane++; if (plane->type == DRM_PLANE_TYPE_OVERLAY) config->num_overlay_plane++; @@ -1369,6 +1369,7 @@ EXPORT_SYMBOL(drm_plane_init); void drm_plane_cleanup(struct drm_plane *plane) { struct drm_device *dev = plane->dev; + struct drm_plane *other; drm_modeset_lock_all(dev); kfree(plane->format_types); @@ -1376,6 +1377,10 @@ void drm_plane_cleanup(struct drm_plane *plane) BUG_ON(list_empty(&plane->head)); + other = list_next_entry(plane, head); + list_for_each_entry_from(other, &dev->mode_config.plane_list, head) + other->index--; + list_del(&plane->head); dev->mode_config.num_total_plane--; if (plane->type == DRM_PLANE_TYPE_OVERLAY) @@ -1393,29 +1398,6 @@ void drm_plane_cleanup(struct drm_plane *plane) EXPORT_SYMBOL(drm_plane_cleanup); /** - * drm_plane_index - find the index of a registered plane - * @plane: plane to find index for - * - * Given a registered plane, return the index of that CRTC within a DRM - * device's list of planes. - */ -unsigned int drm_plane_index(struct drm_plane *plane) -{ - unsigned int index = 0; - struct drm_plane *tmp; - - drm_for_each_plane(tmp, plane->dev) { - if (tmp == plane) - return index; - - index++; - } - - BUG(); -} -EXPORT_SYMBOL(drm_plane_index); - -/** * drm_plane_from_index - find the registered plane at an index * @dev: DRM device * @idx: index of registered plane to find for @@ -1427,13 +1409,11 @@ struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx) { struct drm_plane *plane; - unsigned int i = 0; - drm_for_each_plane(plane, dev) { - if (i == idx) + drm_for_each_plane(plane, dev) + if (idx == plane->index) return plane; - i++; - } + return NULL; } EXPORT_SYMBOL(drm_plane_from_index); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 9771428e1ba8..eda3b1b3d3b4 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1543,6 +1543,7 @@ struct drm_plane { struct drm_object_properties properties; enum drm_plane_type type; + unsigned index; const struct drm_plane_helper_funcs *helper_private; @@ -2316,7 +2317,10 @@ extern int drm_plane_init(struct drm_device *dev, const uint32_t *formats, unsigned int format_count, bool is_primary); extern void drm_plane_cleanup(struct drm_plane *plane); -extern unsigned int drm_plane_index(struct drm_plane *plane); +static inline unsigned int drm_plane_index(struct drm_plane *plane) +{ + return plane->index; +} extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx); extern void drm_plane_force_disable(struct drm_plane *plane); extern int drm_plane_check_pixel_format(const struct drm_plane *plane, -- 2.8.1

4 7

[Bug 116251] New: radeon 5a427809cd9143bef89ee3110f45e84f37484218 "drm/radeon: disable runtime pm on PX laptop" makes dGPU never stop
by bugzilla-daemon＠bugzilla.kernel.org 02 Jun '16

02 Jun '16

https://bugzilla.kernel.org/show_bug.cgi?id=116251 Bug ID: 116251 Summary: radeon 5a427809cd9143bef89ee3110f45e84f37484218 "drm/radeon: disable runtime pm on PX laptop" makes dGPU never stop Product: Drivers Version: 2.5 Kernel Version: 4.5.1 Hardware: Intel OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Video(DRI - non Intel) Assignee: drivers_video-dri(a)kernel-bugs.osdl.org Reporter: eugene.shalygin(a)gmail.com Regression: No Clevo P177SM, these two GPUs: 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Neptune XT [Radeon HD 8970M] (rev ff) With kernel 4.5.1 the Radeon card is always on. Reverting 5a427809cd9143bef89ee3110f45e84f37484218 fixes the problem. -- You are receiving this mail because: You are watching the assignee of the bug.

1 9

[PATCH 1/7] drm/dp: Add defines for DP SDP types
by ville.syrjala＠linux.intel.com 02 Jun '16

02 Jun '16

From: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Add defines for the secondary data packet (SDP) types from the spec. These are the DP specific ones, and in addition HDMI infoframe types (see enum hdmi_infoframe_type) are also valid SDP types. Cc: dri-devel(a)lists.freedesktop.org Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> --- include/drm/drm_dp_helper.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 5a848e734422..9ae1aa5f6713 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -630,6 +630,14 @@ void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]); u8 drm_dp_link_rate_to_bw_code(int link_rate); int drm_dp_bw_code_to_link_rate(u8 link_bw); +#define DP_SDP_AUDIO_TIMESTAMP 0x01 +#define DP_SDP_AUDIO_STREAM 0x02 +#define DP_SDP_EXTENSION 0x04 +#define DP_SDP_AUDIO_COPYMANAGEMENT 0x05 +#define DP_SDP_ISRC 0x06 +#define DP_SDP_VSC 0x07 +#define DP_SDP_CAMERA_GENERIC(i) (0x08 + (i)) /* 0x08-0x0f */ + struct edp_sdp_header { u8 HB0; /* Secondary Data Packet ID */ u8 HB1; /* Secondary Data Packet Type */ -- 2.7.4

1 0

[PATCH 1/6] drm/amdgpu/atpx: track whether if this is a hybrid graphics platform
by Alex Deucher 02 Jun '16

02 Jun '16

hybrid graphics in this case refers to systems which use the new platform d3 cold ACPI methods as opposed to ATPX for dGPU power control. Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 2 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 9 ++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 19d15dc..c6b5ce3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -2394,10 +2394,12 @@ bool amdgpu_device_is_px(struct drm_device *dev); void amdgpu_register_atpx_handler(void); void amdgpu_unregister_atpx_handler(void); bool amdgpu_has_atpx_dgpu_power_cntl(void); +bool amdgpu_is_atpx_hybrid(void); #else static inline void amdgpu_register_atpx_handler(void) {} static inline void amdgpu_unregister_atpx_handler(void) {} static inline bool amdgpu_has_atpx_dgpu_power_cntl(void) { return false; } +static inline bool amdgpu_is_atpx_hybrid(void) { return false; } #endif /* diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 90dfedc..3e973c7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -28,6 +28,7 @@ struct amdgpu_atpx_functions { struct amdgpu_atpx { acpi_handle handle; struct amdgpu_atpx_functions functions; + bool is_hybrid; }; static struct amdgpu_atpx_priv { @@ -68,6 +69,10 @@ bool amdgpu_has_atpx_dgpu_power_cntl(void) { return amdgpu_atpx_priv.atpx.functions.power_cntl; } +bool amdgpu_is_atpx_hybrid(void) { + return amdgpu_atpx_priv.atpx.is_hybrid; +} + /** * amdgpu_atpx_call - call an ATPX method * @@ -192,9 +197,11 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx) ATPX_DYNAMIC_DGPU_POWER_OFF_SUPPORTED)) atpx->functions.power_cntl = true; + atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { - printk("Hybrid Graphics, ATPX dGPU power cntl disabled\n"); + printk("ATPX Hybrid Graphics\n"); atpx->functions.power_cntl = false; + atpx->is_hybrid = true; } return 0; -- 2.5.5

3 9

[Bug 95131] Scaling mode have no effect
by bugzilla-daemon＠freedesktop.org 02 Jun '16

02 Jun '16

https://bugs.freedesktop.org/show_bug.cgi?id=95131 --- Comment #5 from Daniel Scharrer <daniel(a)constexpr.org> --- Same issue here: Distribution: Gentoo GPU: R9 380X (TONGA) Display connector: DVI xf86-video-amdgpu: git-60ced50 X server: 1.17.4 Mesa: git-d98d6e6 libdrm: git-7aab852 Kernel: 4.6.0 I can confirm it works with the DAL enabled in the drm-next-4.7-wip-dal branch of https://cgit.freedesktop.org/~agd5f/linux/ (the drm-next-4.8-wip-dal branch locks up during boot). -- You are receiving this mail because: You are the assignee for the bug.

1 0

[GIT PULL] drm/hdlcd: fixes for v4.7
by Liviu Dudau 02 Jun '16

02 Jun '16

Hi Dave, I have accumulated some cleanup patches for HDLCD, partly triggered by Daniel Vetter's work on non-blocking atomic operations, that I would like to integrate into v4.7. My first patch is important for the newly enabled hibernate option for AArch64 on Juno, the others are fixing behaviour in HDLCD and adding a debugfs entry to help track the underlying framebuffer usage. I'm also taking one of Daniel's patches from his non-blocking series to help with the integration of his patches later. The following changes since commit 1a695a905c18548062509178b98bc91e67510864: Linux 4.7-rc1 (2016-05-29 09:29:24 -0700) are available in the git repository at: git://linux-arm.org/linux-ld.git for-upstream/hdlcd for you to fetch changes up to c41ef79e281e08c3a4f8242615d55d1226cd9c69: drm: hdlcd: Add information about the underlying framebuffers in debugfs (2016-06-02 11:09:27 +0100) ---------------------------------------------------------------- Daniel Vetter (1): drm/hdlcd: Fix up crtc_state->event handling Liviu Dudau (3): drm: hdlcd: Revamp runtime power management drm: hdlcd: Cleanup the atomic plane operations drm: hdlcd: Add information about the underlying framebuffers in debugfs drivers/gpu/drm/arm/hdlcd_crtc.c | 86 ++++++++++++++++++++++----------------- drivers/gpu/drm/arm/hdlcd_drv.c | 68 +++++++++++++------------------ drivers/gpu/drm/arm/hdlcd_drv.h | 5 +-- drivers/gpu/drm/i2c/tda998x_drv.c | 4 ++ 4 files changed, 82 insertions(+), 81 deletions(-) Best regards, Liviu -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯

1 1

[Bug 88458] The monitor turns off when playing starcraft 2 in wine
by bugzilla-daemon＠freedesktop.org 02 Jun '16

02 Jun '16

https://bugs.freedesktop.org/show_bug.cgi?id=88458 --- Comment #7 from Nicolai Hähnle <nhaehnle(a)gmail.com> --- Can you record an apitrace? If you get a trace file that hangs reliably on replay, that would be very useful. Upload to Google Drive or similar if the file is too big (which it usually will be). -- You are receiving this mail because: You are the assignee for the bug.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel June 2016