dri-devel November 2018

dri-devel@lists.freedesktop.org

297 participants
2005 discussions

[Bug 101723] hdmi unplug not changing connector status
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=101723 Bug ID: 101723 Summary: hdmi unplug not changing connector status Product: DRI Version: unspecified Hardware: All OS: Linux (All) Status: NEW Severity: minor Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: aki.lemmetyinen(a)gmail.com Created attachment 132558 --> https://bugs.freedesktop.org/attachment.cgi?id=132558&action=edit Small patch to fix the problem I made a quick script for my HP Pavilion dv7 to automatically switch audio to hdmi and back at hotplug event, but I noticed that the driver do not react properly to plug/unplug. /sys/class/drm/card0-HDMI-A-1/status was "connected" even after unplugging the cable. After looking at the code it seemed that in case of cable disconnected there is not point where hotplug state is polled. Function radeon_connector_hotplug do not do much with hdmi and radeon_hotplug_work_func cals drm_helper_hpd_irq_event which calls radeon_dvi_detect where, in case of disconnected cable, it return with connector_status_connected, just throwing an error for missing EDID. It looks like there would maybe be a need for a bigger rewrite of hotplug code, but just to get connector state working properly, I added these few lines to radeon_connectors.c. -- You are receiving this mail because: You are the assignee for the bug.

1 2

[Bug 101671] "classic" *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=101671 Bug ID: 101671 Summary: "classic" *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD) Product: DRI Version: XOrg git Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: lyssdod(a)gmail.com Hi guys, This error goes for a very long time. I have a hybrid graphics laptop (sandy bridge + radeon), and the only case radeon worked was fglrx. I'm using Gentoo and they have recently dropped any support for fglrx (mostly because AMD and Xorg had), so I tried fresh installation just to get some luck - and it failed exactly as before. Trivia: - radeon and i915 as modules; - power on; - after login manager shows a pic, everything hangs deadly; - using netconsole I was able to get dmesg error when everything freezes: [ 470.521009] [drm] PCIE gen 2 link speeds already enabled [ 470.522846] radeon 0000:01:00.0: No VRAM object for PCIE GART. [ 470.523493] [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume I provide detailed system info shortly. Thanks! -- You are receiving this mail because: You are the assignee for the bug.

1 8

[Bug 101593] Display errors with a R9 290x and a resolution of 3840x2160
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=101593 Bug ID: 101593 Summary: Display errors with a R9 290x and a resolution of 3840x2160 Product: DRI Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: tardingens(a)googlemail.com Using the radeon driver with an AMD R9 290x and a 4k monitor causes display corruption when set to the native resolution. The problem was introduced with this change: drm/radeon: change vblank_times calculation method to reduce computational error. https://patchwork.kernel.org/patch/9403897/ The issue is very easy to see when the mclk speed is forced to low, but it occurs in normal usage too. Before the patch mclk switching was disabled at 4k and the bug was not there. The Windows driver has no such problems and does fine, even with mclk switching. -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 101491] Can't wake up the dedicated graphics card unless power management is disabled
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=101491 Bug ID: 101491 Summary: Can't wake up the dedicated graphics card unless power management is disabled Product: DRI Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: drkdfndr(a)rocketmail.com Created attachment 132031 --> https://bugs.freedesktop.org/attachment.cgi?id=132031&action=edit dmesg output I have a ASUS K53TK with a AMD A6-3420M. It has an integrated graphics card the AMD HD 6520G, and a dedicated one HD 7670M. I am only able to use the dedicated card if I set the parameter "radeon.runpm=0". Otherwise xrandr only sees one provider, and DRI_PRIME=1 can't render any program. At boot time, if I don't disable the power management I get several error like [ 458.460874] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xFFFFFFFF). -- You are receiving this mail because: You are the assignee for the bug.

1 3

[Bug 101290] Radeon R9 390X regression - No output (CVT) or corruption (CVT-R) at 4096x2160@60Hz over DisplayPort
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=101290 Bug ID: 101290 Summary: Radeon R9 390X regression - No output (CVT) or corruption (CVT-R) at 4096x2160@60Hz over DisplayPort Product: DRI Version: unspecified Hardware: Other OS: All Status: NEW Severity: major Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: freedesktop(a)nuclearsunshine.com I had thought I had filed this bug a long time ago on here, but I can't find it... Graphics card: Radeon R9 390X (Saphhire 11241-04-20G) Display: LG 31MU97 (via DisplayPort) With Linux 4.4.x, 4096 x 2160 @ 60 Hz progressive output was working with standard CVT timing. With Linux 4.5.x onwards, standard CVT timing at that resolution fails (no signal) with the following dmesg output: kernel: [drm:radeon_dp_link_train [radeon]] *ERROR* channel eq failed kernel: [drm:radeon_dp_link_train [radeon]] *ERROR* channel eq failed: 5 tries CVT-R timing results in output, but with a flickering/corrupted full-height band down the right hand side (it approximates the intended output, but pixels seem be to be corrupt in single-pixel horizontal bands and/or flicker in horizontal single-pixel bands) It could be complete coincidence, but the width of the corrupt band seems to be the difference in width vs. 3840x2160, i.e. aobut 256 pixels. With this timing there are no messages in dmesg. There's a downstream Fedora bug report here: https://bugzilla.redhat.com/show_bug.cgi?id=1353341 -- You are receiving this mail because: You are the assignee for the bug.

1 3

[Bug 100941] Improve time to suspend on
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=100941 Bug ID: 100941 Summary: Improve time to suspend on Product: DRI Version: DRI git Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: paulepanter(a)users.sourceforge.net Created attachment 131223 --> https://bugs.freedesktop.org/attachment.cgi?id=131223&action=edit TML page generated by pm-graph (`sudo ./analyze_suspend.py -config config/suspend-callgraph.cfg`) The ASRock E350M1 has a Radeon HD 6310. ``` $ sudo lspci -s 0:01.0 -nn -v 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802] Flags: bus master, fast devsel, latency 0, IRQ 28 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at f0100000 (32-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: radeon Kernel modules: radeon ``` With Debian Sid/unstable with Linux 4.9.25 suspend and resume times are benchmarked with pm-graph [1], and the command below. ``` sudo ./analyze_suspend.py -config config/suspend-callgraph.cfg ``` It turns out that with 258 ms the radeon module takes the majority of the time during suspend. In that cycle one `radeon_bo_evict_vram` call takes the longest with 198 ms. ``` […] 459.186778 | 0) kworker-1495 | 0.974 us | radeon_fence_wait_empty [radeon](); 459.186780 | 0) kworker-1495 | 0.440 us | radeon_fence_wait_empty [radeon](); 459.186783 | 0) kworker-1495 | 0.501 us | radeon_fence_wait_empty [radeon](); 459.186785 | 0) kworker-1495 | 5.424 us | radeon_save_bios_scratch_regs [radeon](); 459.186793 | 0) kworker-1495 | 7625.511 us | evergreen_suspend [radeon](); 459.194422 | 0) kworker-1495 | 10.158 us | evergreen_hpd_fini [radeon](); 459.194434 | 0) kworker-1495 | 198203.3 us | radeon_bo_evict_vram [radeon](); […] ``` Please see the attached files for more details. -- You are receiving this mail because: You are the assignee for the bug.

1 8

[Bug 100800] With KMS:No link with displayport and A6-3600 APU from 4.4.x to 4.11.0.rc8, unless nomodeset kernel boot parameter
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=100800 Bug ID: 100800 Summary: With KMS:No link with displayport and A6-3600 APU from 4.4.x to 4.11.0.rc8, unless nomodeset kernel boot parameter Product: DRI Version: XOrg git Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: abittner(a)opensuse.org With KMS:No link with displayport and A6-3600 APU from 4.4.x to 4.11.0.rc8, unless nomodeset kernel boot parameter Please see my original distribution bugreport at <https://bugzilla.opensuse.org/show_bug.cgi?id=1035240> Tested with OpenSuSE Leap 42.2 (all x64) kernels 4.4.x up to 4.11.0.rc8 kernels Hardware: Motherboard: F1A75-V PRO by Asus, with AMD cpu/gpu/apu all-in-one: AMD A6-3600 APU with Radeon(tm) HD Graphics hdmi port on motherboard and on the same monitor with hdmi cable works and produces link, same motherboard with displayport cable and ports and same monitor at its displayport port gives no link, unless one uses the "nomodeset" kernel boot parameter. Thank you. -- You are receiving this mail because: You are the assignee for the bug.

1 6

[Bug 100712] ring 0 stalled after bytes_moved_threshold reached - Cap Verde - HD 7770
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=100712 Bug ID: 100712 Summary: ring 0 stalled after bytes_moved_threshold reached - Cap Verde - HD 7770 Product: DRI Version: DRI git Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: julien.isorce(a)gmail.com Kernel 4.9 from https://cgit.freedesktop.org/~agd5f/linux/log/?h=amd-staging-4.9 and latest mesa. (same result with drm-next-4.12 branch) Same result with kernel 4.8 and mesa 12.0.6. In kernel radeon_object.c::radeon_bo_list_validate, once "bytes_moved > bytes_moved_threshold" is reached (this is the case for 850 bo in the same list_for_each_entry loop), I can see that radeon_ib_schedule emits a fence that it takes more than the radeon.lockup_timeout to be signaled. In radeon_fence_activity, I checked that the "last_emitted" is the seq number for this last emited fence. And last_seq is equal to last_emitted-1. Then the next call to ttm_wait_bo blocks (15 * HZ > radeon.lockup_timeout) until gpu lockup which leads to a gpu reset. Also it seems the fence is signaled by swapper after more than 10 seconds but it is too late. I requires to reduce the "15" param above to 4 to see that. Is it normal that radeon_bo_list_validate still tries to move the bo if bytes_moved_threshold is reached ? Indeed ttm_bo_validate is always called (it blits from vram to vram). Is it also normal that ttm_bo_validate is called with evict flag as true once bytes_moved_threshold is reached ? -- You are receiving this mail because: You are the assignee for the bug.

1 10

[Bug 100675] No signal on DisplayPort [drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=100675 Bug ID: 100675 Summary: No signal on DisplayPort [drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed Product: DRI Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: oleg.hoefling(a)gmail.com Created attachment 130835 --> https://bugs.freedesktop.org/attachment.cgi?id=130835&action=edit dmesg log First of all, this is the first bug reported by me, so I apologize in advance if I assigned it to a wrong category. I have a monitor, a DisplayPort cable and two notebooks. When the monitor is connected to the first notebook (Lenovo T440), everything works fine, so the cable seems is working fine. Now, when the monitor is connected to the second notebook, it shows "no signal is detected" and switches into sleep mode. Here is what dmesg outputs (I will attach the complete dmesg log): [ 12.064503] [drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed [ 12.064517] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed Of course, after logging into the X session, the monitor remains black, although Xorg does not report any errors in log: $ grep -n EE /var/log/Xorg.0.log 16: (WW) warning, (EE) error, (NI) not implemented, (??) unknown. System: Linux msi_gx70 4.10.9-gentoo #2 SMP Thu Apr 13 21:30:04 CEST 2017 x86_64 AMD A10-5750M APU with Radeon(tm) HD Graphics AuthenticAMD GNU/Linux -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 100616] With Radeon HD 8550M system freezes when running 3D application
by bugzilla-daemon＠freedesktop.org 19 Nov '19

19 Nov '19

https://bugs.freedesktop.org/show_bug.cgi?id=100616 Bug ID: 100616 Summary: With Radeon HD 8550M system freezes when running 3D application Product: DRI Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: major Priority: medium Component: DRM/Radeon Assignee: dri-devel(a)lists.freedesktop.org Reporter: erham65t(a)yahoo.com Created attachment 130753 --> https://bugs.freedesktop.org/attachment.cgi?id=130753&action=edit dmesg output My laptop has hybrid graphics. Output of "lspci | grep AMD": "0a:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun LE [Radeon HD 8550M / R5 M230] (rev ff)" I use an application called "Visual Molecular Dynamics", which opens an OpenGL window and renders 3D images. There is no problem when using the integrated GPU. But when I run the application using DRI_PRIME=1, the system freezes when the OpenGL window is being opened. I need to use the dedicated GPU, because the integrated GPU isn't powerful enough for my work. OS: Ubuntu 16.04 64bit, with last updates -- You are receiving this mail because: You are the assignee for the bug.

1 3

← Newer
1
...
6
7
8
9
10
11
12
...
201
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel November 2018