dri-devel September 2021

dri-devel@lists.freedesktop.org

348 participants
817 discussions

New uAPI for color management proposal and feedback request v2
by Werner Sembach 16 Sep '21

16 Sep '21

Greetings, Original proposal: https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg62387.html Abstract: Add "preferred color format", "active color format", "active bpc", and "active Broadcast RGB" drm properties, to control color information send to the monitor. It seems that the "preferred-" properties is not what is actually the most useful for the userspace devs. Preferable (Note: with only a sample size of 2 people) would be a "force color format" property. If the color format is not available for the current Monitor and GPU combo. the TEST_ONLY check should fail and the property should not be setable. This however opens another problem: When a Monitor is disconnected and a new one is connected, the drm properties do not get resetted. So if the old monitor did allow to set for example ycbcr420, but the new monitor does not support this color format at all, it will stay permanently black until the drm property is set to a correct value by hand. This is not an expected behavior imho. So a discussion questions: Does it make sense that connector properties are keep for different Monitors? If no: On connecting a new Monitor all atomic drm properties should be reset to a default value. I have an idea how this could be implemented (correct me if i'm wrong): When an atomic property is attached it get assigned an inital value. But if I understood the docu correctly, this value is ignored because atomic properties use the getter and setter methods when their values are read or written. My implementation suggestion would be to iterate over all attached atomic properties once a new monitor is connected and reset them to this initial value, which should be unchanged since initialization? This assumes that besides the initial value being unused it's still a sane default for all drivers. Kind Regards, Werner Sembach

3 2

[PATCH 00/24] Fix some issues at documentation
by Mauro Carvalho Chehab 16 Sep '21

16 Sep '21

Hi John, The first patch in this series fix a bad character used instead of a "(c)" UTF-8 symbol. The remaining ones fix several broken references to files under Documentation/, several due to DT schema conversions from .txt to .yaml. Mauro Carvalho Chehab (24): visorbus: fix a copyright symbol that was bad encoded dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference dt-bindings: w1: update w1-gpio.yaml reference dt-bindings: mmc: update mmc-card.yaml reference libbpf: update index.rst reference docs: accounting: update delay-accounting.rst reference tools: bpftool: update bpftool-prog.rst reference tools: bpftool: update bpftool-map.rst reference bpftool: update bpftool-cgroup.rst reference MAINTAINERS: update mtd-physmap.yaml reference MAINTAINERS: update arm,vic.yaml reference MAINTAINERS: update aspeed,i2c.yaml reference MAINTAINERS: update faraday,ftrtc010.yaml reference MAINTAINERS: update fsl,fec.yaml reference MAINTAINERS: update mtd-physmap.yaml reference MAINTAINERS: update ti,am654-hbmc.yaml reference MAINTAINERS: update ti,sci.yaml reference MAINTAINERS: update intel,ixp46x-rng.yaml reference MAINTAINERS: update nxp,imx8-jpeg.yaml reference MAINTAINERS: update gemini.yaml reference MAINTAINERS: update brcm,unimac-mdio.yaml reference MAINTAINERS: update chipone,icn8318.yaml reference MAINTAINERS: update silergy,sy8106a.yaml reference Documentation/admin-guide/sysctl/kernel.rst | 2 +- Documentation/bpf/index.rst | 2 +- .../display/mediatek/mediatek,disp.txt | 2 +- Documentation/networking/dsa/sja1105.rst | 2 +- Documentation/w1/masters/w1-gpio.rst | 2 +- MAINTAINERS | 28 +++++++++---------- drivers/mmc/host/omap_hsmmc.c | 2 +- drivers/visorbus/visorbus_main.c | 2 +- .../selftests/bpf/test_bpftool_synctypes.py | 6 ++-- 9 files changed, 24 insertions(+), 24 deletions(-) -- 2.31.1

1 1

[PATCH V5 00/11] PCI/VGA: Rework default VGA device selection
by Huacai Chen 16 Sep '21

16 Sep '21

My original work is at [1]. Current default VGA device selection fails in some cases: - On BMC system, the AST2500 bridge [1a03:1150] does not implement PCI_BRIDGE_CTL_VGA [1]. This is perfectly legal but means the legacy VGA resources won't reach downstream devices unless they're included in the usual bridge windows. - vga_arb_select_default_device() will set a device below such a bridge as the default VGA device as long as it has PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled. - vga_arbiter_add_pci_device() is called for every VGA device, either at boot-time or at hot-add time, and it will also set the device as the default VGA device, but ONLY if all bridges leading to it implement PCI_BRIDGE_CTL_VGA. - This difference between vga_arb_select_default_device() and vga_arbiter_add_pci_device() means that a device below an AST2500 or similar bridge can only be set as the default if it is enumerated before vga_arb_device_init(). - On ACPI-based systems, PCI devices are enumerated by acpi_init(), which runs before vga_arb_device_init(). - On non-ACPI systems, like on MIPS system, they are enumerated by pcibios_init(), which typically runs *after* vga_arb_device_init(). So I made vga_arb_update_default_device() to replace the current vga_ arb_select_default_device(), which will be call from vga_arbiter_add_ pci_device(), set the default device even if it does not own the VGA resources because an upstream bridge doesn't implement PCI_BRIDGE_CTL_ VGA. And the default VGA device is updated if a better one is found (device with legacy resources enabled is better, device owns the firmware framebuffer is even better). Bjorn do some rework and extension in V2. It moves the VGA arbiter to the PCI subsystem, fixes a few nits, and breaks a few pieces to make the main patch a little smaller. V3 rewrite the commit log of the last patch (which is also summarized by Bjorn). V4 split the last patch to two steps. V5 split big patches again and sort the patches. All comments welcome! [1] https://lore.kernel.org/dri-devel/20210705100503.1120643-1-chenhuacai@loong… Bjorn Helgaas (4): PCI/VGA: Move vgaarb to drivers/pci PCI/VGA: Remove empty vga_arb_device_card_gone() PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Replace full MIT license text with SPDX identifier Huacai Chen (7): PCI/VGA: Prefer vga_default_device() PCI/VGA: Move vga_arb_integrated_gpu() earlier in file PCI/VGA: Split out vga_arb_update_default_device() PCI/VGA: Update default VGA device if a better one found PCI/VGA: Update default VGA device again for X86/IA64 PCI/VGA: Remove vga_arb_select_default_device() PCI/VGA: Log bridge control messages when adding devices Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> --- drivers/gpu/vga/Kconfig | 19 --- drivers/gpu/vga/Makefile | 1 - drivers/pci/Kconfig | 19 +++ drivers/pci/Makefile | 1 + drivers/{gpu/vga => pci}/vgaarb.c | 269 ++++++++++++------------------ 5 files changed, 126 insertions(+), 183 deletions(-) rename drivers/{gpu/vga => pci}/vgaarb.c (90%) -- 2.27.0

3 13

[PATCH] drm/vmwgfx: Fix spelling mistake "vmw_surface_cach" -> "vmw_surface_cache"
by Colin King 16 Sep '21

16 Sep '21

From: Colin Ian King <colin.king(a)canonical.com> There is a spelling mistake in the cache argument in the comment block, fix it. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- drivers/gpu/drm/vmwgfx/vmw_surface_cache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmw_surface_cache.h b/drivers/gpu/drm/vmwgfx/vmw_surface_cache.h index b0d87c5f58d8..e9536c901213 100644 --- a/drivers/gpu/drm/vmwgfx/vmw_surface_cache.h +++ b/drivers/gpu/drm/vmwgfx/vmw_surface_cache.h @@ -371,7 +371,7 @@ static inline u32 vmw_surface_subres(const struct vmw_surface_cache *cache, * @format: The surface format. * @num_mip_levels: Number of mipmap levels. * @num_layers: Number of layers. - * @cache: Pointer to a struct vmw_surface_cach object to be filled in. + * @cache: Pointer to a struct vmw_surface_cache object to be filled in. * * Return: Zero on success, -EINVAL on invalid surface layout. */ -- 2.32.0

1 0

[PATCH] drm/tegra: plane: Improve use of dev_err_probe()
by Cai Huoqing 16 Sep '21

16 Sep '21

Return dev_err_probe() directly, because the return value of dev_err_probe() is the appropriate error code, and it can reduce code size, simplify the code. Signed-off-by: Cai Huoqing <caihuoqing(a)baidu.com> --- drivers/gpu/drm/tegra/plane.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/tegra/plane.c b/drivers/gpu/drm/tegra/plane.c index e00ec3f40ec8..e373411b1f0b 100644 --- a/drivers/gpu/drm/tegra/plane.c +++ b/drivers/gpu/drm/tegra/plane.c @@ -744,21 +744,17 @@ int tegra_plane_interconnect_init(struct tegra_plane *plane) plane->icc_mem = devm_of_icc_get(dev, icc_name); err = PTR_ERR_OR_ZERO(plane->icc_mem); - if (err) { - dev_err_probe(dev, err, "failed to get %s interconnect\n", - icc_name); - return err; - } + if (err) + return dev_err_probe(dev, err, "failed to get %s interconnect\n", + icc_name); /* plane B on T20/30 has a dedicated memory client for a 6-tap vertical filter */ if (plane->index == 1 && dc->soc->has_win_b_vfilter_mem_client) { plane->icc_mem_vfilter = devm_of_icc_get(dev, "winb-vfilter"); err = PTR_ERR_OR_ZERO(plane->icc_mem_vfilter); - if (err) { - dev_err_probe(dev, err, "failed to get %s interconnect\n", - "winb-vfilter"); - return err; - } + if (err) + return dev_err_probe(dev, err, "failed to get %s interconnect\n", + "winb-vfilter"); } return 0; -- 2.25.1

1 0

[PATCH] drm/stm: dsi: Improve use of dev_err_probe()
by Cai Huoqing 16 Sep '21

16 Sep '21

Return dev_err_probe() directly, because the return value of dev_err_probe() is the appropriate error code, and it can reduce code size, simplify the code. Signed-off-by: Cai Huoqing <caihuoqing(a)baidu.com> --- drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c index 32cb41b2202f..6e9e42d069c9 100644 --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c @@ -370,11 +370,9 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev) } dsi->vdd_supply = devm_regulator_get(dev, "phy-dsi"); - if (IS_ERR(dsi->vdd_supply)) { - ret = PTR_ERR(dsi->vdd_supply); - dev_err_probe(dev, ret, "Failed to request regulator\n"); - return ret; - } + if (IS_ERR(dsi->vdd_supply)) + return dev_err_probe(dev, PTR_ERR(dsi->vdd_supply), + "Failed to request regulator\n"); ret = regulator_enable(dsi->vdd_supply); if (ret) { -- 2.25.1

1 0

[PATCH] drm/exynos: Make use of the helper function devm_platform_ioremap_resource()
by Cai Huoqing 16 Sep '21

16 Sep '21

Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing(a)baidu.com> --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 5 +---- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 5 +---- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 +----- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 4 +--- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 4 +--- drivers/gpu/drm/exynos/exynos_hdmi.c | 4 +--- 9 files changed, 9 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 9870c4e6af36..b5001db7a95c 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -793,7 +793,6 @@ static int exynos5433_decon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct decon_context *ctx; - struct resource *res; int ret; int i; @@ -818,8 +817,7 @@ static int exynos5433_decon_probe(struct platform_device *pdev) ctx->clks[i] = clk; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->addr = devm_ioremap_resource(dev, res); + ctx->addr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->addr)) return PTR_ERR(ctx->addr); diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index e39fac889edc..8d137857818c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1738,7 +1738,6 @@ static const struct component_ops exynos_dsi_component_ops = { static int exynos_dsi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct exynos_dsi *dsi; int ret, i; @@ -1789,8 +1788,7 @@ static int exynos_dsi_probe(struct platform_device *pdev) } } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dsi->reg_base = devm_ioremap_resource(dev, res); + dsi->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(dsi->reg_base)) return PTR_ERR(dsi->reg_base); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index a3c718148c45..ecfd82d0afb7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -85,7 +85,6 @@ struct fimc_scaler { /* * A structure of fimc context. * - * @regs_res: register resources. * @regs: memory mapped io registers. * @lock: locking of operations. * @clocks: fimc clocks. @@ -103,7 +102,6 @@ struct fimc_context { struct exynos_drm_ipp_formats *formats; unsigned int num_formats; - struct resource *regs_res; void __iomem *regs; spinlock_t lock; struct clk *clocks[FIMC_CLKS_MAX]; @@ -1327,8 +1325,7 @@ static int fimc_probe(struct platform_device *pdev) ctx->num_formats = num_formats; /* resource memory */ - ctx->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(dev, ctx->regs_res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 700ca4fa6665..c735e53939d8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -1202,9 +1202,7 @@ static int fimd_probe(struct platform_device *pdev) return PTR_ERR(ctx->lcd_clk); } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - ctx->regs = devm_ioremap_resource(dev, res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index b00230626c6a..471fd6c8135f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1449,7 +1449,6 @@ static const struct component_ops g2d_component_ops = { static int g2d_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; struct g2d_data *g2d; int ret; @@ -1491,9 +1490,7 @@ static int g2d_probe(struct platform_device *pdev) clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - g2d->regs = devm_ioremap_resource(dev, res); + g2d->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 90d7bf906885..166a80262896 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -86,7 +86,6 @@ struct gsc_scaler { /* * A structure of gsc context. * - * @regs_res: register resources. * @regs: memory mapped io registers. * @gsc_clk: gsc gate clock. * @sc: scaler infomations. @@ -103,7 +102,6 @@ struct gsc_context { struct exynos_drm_ipp_formats *formats; unsigned int num_formats; - struct resource *regs_res; void __iomem *regs; const char **clk_names; struct clk *clocks[GSC_MAX_CLOCKS]; @@ -1272,9 +1270,7 @@ static int gsc_probe(struct platform_device *pdev) } } - /* resource memory */ - ctx->regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(dev, ctx->regs_res); + ctx->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index ee61be4cf152..dec7df35baa9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -278,7 +278,6 @@ static const struct component_ops rotator_component_ops = { static int rotator_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *regs_res; struct rot_context *rot; const struct rot_variant *variant; int irq; @@ -292,8 +291,7 @@ static int rotator_probe(struct platform_device *pdev) rot->formats = variant->formats; rot->num_formats = variant->num_formats; rot->dev = dev; - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - rot->regs = devm_ioremap_resource(dev, regs_res); + rot->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(rot->regs)) return PTR_ERR(rot->regs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index f9ae5b038d59..3a7851b7dc66 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -485,7 +485,6 @@ static const struct component_ops scaler_component_ops = { static int scaler_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *regs_res; struct scaler_context *scaler; int irq; int ret, i; @@ -498,8 +497,7 @@ static int scaler_probe(struct platform_device *pdev) (struct scaler_data *)of_device_get_match_data(dev); scaler->dev = dev; - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - scaler->regs = devm_ioremap_resource(dev, regs_res); + scaler->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(scaler->regs)) return PTR_ERR(scaler->regs); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index c769dec576de..7655142a4651 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1957,7 +1957,6 @@ static int hdmi_probe(struct platform_device *pdev) struct hdmi_audio_infoframe *audio_infoframe; struct device *dev = &pdev->dev; struct hdmi_context *hdata; - struct resource *res; int ret; hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); @@ -1979,8 +1978,7 @@ static int hdmi_probe(struct platform_device *pdev) return ret; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hdata->regs = devm_ioremap_resource(dev, res); + hdata->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hdata->regs)) { ret = PTR_ERR(hdata->regs); return ret; -- 2.25.1

2 1

[PATCH 0/2] Add support for querying hw info that UMDs need
by John.C.Harrison＠Intel.com 16 Sep '21

16 Sep '21

From: John Harrison <John.C.Harrison(a)Intel.com> Various UMDs require hardware configuration information about the current platform. A bunch of static information is available in a fixed table that can be retrieved from the GuC. Test-with: 20210915215558.2473428-2-John.C.Harrison(a)Intel.com UMD: https://github.com/intel/compute-runtime/pull/432/files UMD: https://github.com/intel/media-driver/pull/1239/files CC: Katarzyna Cencelewska <katarzyna.cencelewska(a)intel.com> CC: Tony Ye <tony.ye(a)intel.com> CC: Jason Ekstrand <jason.ekstrand(a)intel.com> Signed-off-by: John Harrison <John.C.Harrison(a)Intel.com> Reviewed-by: Matthew Brost <matthew.brost(a)intel.com> John Harrison (1): drm/i915/guc: Add fetch of hwconfig table Rodrigo Vivi (1): drm/i915/uapi: Add query for hwconfig table drivers/gpu/drm/i915/Makefile | 1 + .../gpu/drm/i915/gt/uc/abi/guc_actions_abi.h | 1 + .../gpu/drm/i915/gt/uc/abi/guc_errors_abi.h | 4 + drivers/gpu/drm/i915/gt/uc/intel_guc.c | 3 +- drivers/gpu/drm/i915/gt/uc/intel_guc.h | 2 + .../gpu/drm/i915/gt/uc/intel_guc_hwconfig.c | 156 ++++++++++++++++++ .../gpu/drm/i915/gt/uc/intel_guc_hwconfig.h | 19 +++ drivers/gpu/drm/i915/gt/uc/intel_uc.c | 6 + drivers/gpu/drm/i915/i915_query.c | 23 +++ include/uapi/drm/i915_drm.h | 1 + 10 files changed, 215 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.h -- 2.25.1

1 2

[PATCH V6 0/2] drm/vkms: Add virtual hardware module
by Sumera Priyadarsini 15 Sep '21

15 Sep '21

This patchset adds support for emulating virtual hardware with VKMS. The virtual hardware mode can be enabled by using the following command while loading the module: sudo modprobe vkms enable_virtual_hw=1 The first patch is prep work for adding virtual_hw mode and refactors the plane composition in vkms by adding a helper function vkms_composer_common() which can be used for both vblank mode and virtual mode. The second patch adds virtual hardware support as a module option. It adds new atomic helper functions for the virtual mode and uses the existing atomic helpers for vblank mode This gives us two sets of drm_crtc_funcs and drm_crtc_helper_funcs structs for both modes, making the code flow cleaner and easier to debug. This patchset has been tested with the igt tests- kms_writeback, kms_atomic, kms_lease, kms_flip, kms_pipe_get_crc and preserves results except for subtests related to crc reads and vertical blanking, in which case, tests are skipped. Sumera Priyadarsini (2): drm/vkms: Refactor vkms_composer_worker() to prep for virtual_hw mode drm/vkms: Add support for virtual hardware mode drivers/gpu/drm/vkms/vkms_composer.c | 92 +++++++++++++++++---------- drivers/gpu/drm/vkms/vkms_crtc.c | 43 ++++++++++++- drivers/gpu/drm/vkms/vkms_drv.c | 16 +++-- drivers/gpu/drm/vkms/vkms_drv.h | 4 ++ drivers/gpu/drm/vkms/vkms_writeback.c | 3 +- 5 files changed, 117 insertions(+), 41 deletions(-) -- 2.31.1

2 3

[RFC PATCH v2 1/2] drm/bridge: parade-ps8640: Use regmap APIs
by Philip Chen 15 Sep '21

15 Sep '21

Replace the direct i2c access (i2c_smbus_* functions) with regmap APIs, which will simplify the future update on ps8640 driver. Signed-off-by: Philip Chen <philipchen(a)chromium.org> --- Changes in v2: - Add separate reg map config per page drivers/gpu/drm/bridge/parade-ps8640.c | 89 ++++++++++++++++++-------- 1 file changed, 63 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 685e9c38b2db..1b2414601538 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -9,6 +9,7 @@ #include <linux/i2c.h> #include <linux/module.h> #include <linux/of_graph.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <drm/drm_bridge.h> @@ -31,6 +32,11 @@ #define NUM_MIPI_LANES 4 +#define COMMON_PS8640_REGMAP_CONFIG \ + .reg_bits = 8, \ + .val_bits = 8, \ + .cache_type = REGCACHE_NONE + /* * PS8640 uses multiple addresses: * page[0]: for DP control @@ -64,12 +70,48 @@ struct ps8640 { struct drm_bridge *panel_bridge; struct mipi_dsi_device *dsi; struct i2c_client *page[MAX_DEVS]; + struct regmap *regmap[MAX_DEVS]; struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown; bool powered; }; +static const struct regmap_config ps8640_regmap_config[] = { + [PAGE0_DP_CNTL] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xbf + }, + [PAGE1_VDO_BDG] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xff + }, + [PAGE2_TOP_CNTL] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xff + }, + [PAGE3_DSI_CNTL1] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xff + }, + [PAGE4_MIPI_PHY] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xff + }, + [PAGE5_VPLL] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0x7f + }, + [PAGE6_DSI_CNTL2] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xff + }, + [PAGE7_SPI_CNTL] = { + COMMON_PS8640_REGMAP_CONFIG, + .max_register = 0xff + } +}; + static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) { return container_of(e, struct ps8640, bridge); @@ -78,13 +120,13 @@ static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, const enum ps8640_vdo_control ctrl) { - struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1]; + struct regmap *map = ps_bridge->regmap[PAGE3_DSI_CNTL1]; u8 vdo_ctrl_buf[] = { VDO_CTL_ADD, ctrl }; int ret; - ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD, - sizeof(vdo_ctrl_buf), - vdo_ctrl_buf); + ret = regmap_bulk_write(map, PAGE3_SET_ADD, + vdo_ctrl_buf, sizeof(vdo_ctrl_buf)); + if (ret < 0) { DRM_ERROR("failed to %sable VDO: %d\n", ctrl == ENABLE ? "en" : "dis", ret); @@ -96,8 +138,7 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) { - struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL]; - unsigned long timeout; + struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL]; int ret, status; if (ps_bridge->powered) @@ -121,18 +162,12 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) */ msleep(200); - timeout = jiffies + msecs_to_jiffies(200) + 1; + ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status, + status & PS_GPIO9, 20 * 1000, 200 * 1000); - while (time_is_after_jiffies(timeout)) { - status = i2c_smbus_read_byte_data(client, PAGE2_GPIO_H); - if (status < 0) { - DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", status); - goto err_regulators_disable; - } - if ((status & PS_GPIO9) == PS_GPIO9) - break; - - msleep(20); + if (ret < 0) { + DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", ret); + goto err_regulators_disable; } msleep(50); @@ -144,22 +179,15 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) * disabled by the manufacturer. Once disabled, all MCS commands are * ignored by the display interface. */ - status = i2c_smbus_read_byte_data(client, PAGE2_MCS_EN); - if (status < 0) { - DRM_ERROR("failed read PAGE2_MCS_EN: %d\n", status); - goto err_regulators_disable; - } - ret = i2c_smbus_write_byte_data(client, PAGE2_MCS_EN, - status & ~MCS_EN); + ret = regmap_update_bits(map, PAGE2_MCS_EN, MCS_EN, 0); if (ret < 0) { DRM_ERROR("failed write PAGE2_MCS_EN: %d\n", ret); goto err_regulators_disable; } /* Switch access edp panel's edid through i2c */ - ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS, - I2C_BYPASS_EN); + ret = regmap_write(map, PAGE2_I2C_BYPASS, I2C_BYPASS_EN); if (ret < 0) { DRM_ERROR("failed write PAGE2_I2C_BYPASS: %d\n", ret); goto err_regulators_disable; @@ -362,6 +390,10 @@ static int ps8640_probe(struct i2c_client *client) ps_bridge->page[PAGE0_DP_CNTL] = client; + ps_bridge->regmap[PAGE0_DP_CNTL] = devm_regmap_init_i2c(client, ps8640_regmap_config); + if (IS_ERR(ps_bridge->regmap[PAGE0_DP_CNTL])) + return PTR_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]); + for (i = 1; i < ARRAY_SIZE(ps_bridge->page); i++) { ps_bridge->page[i] = devm_i2c_new_dummy_device(&client->dev, client->adapter, @@ -371,6 +403,11 @@ static int ps8640_probe(struct i2c_client *client) client->addr + i); return PTR_ERR(ps_bridge->page[i]); } + + ps_bridge->regmap[i] = devm_regmap_init_i2c(ps_bridge->page[i], + ps8640_regmap_config + i); + if (IS_ERR(ps_bridge->regmap[i])) + return PTR_ERR(ps_bridge->regmap[i]); } i2c_set_clientdata(client, ps_bridge); -- 2.33.0.309.g3052b89438-goog

2 6

← Newer
1
...
53
54
55
56
57
58
59
...
82
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel September 2021