From: Daniel Kurtz djkurtz@chromium.org
When setting a new display mode, dw_hdmi_setup() calls dw_hdmi_enable_video_path(), which disables all hdmi clocks, including the audio clock.
We should only (re-)enable the audio clock if audio was already enabled when setting the new mode.
Without this patch, on RK3288, there will be HDMI audio on some monitors if i2s was played to headphone when the monitor was plugged. ACER H277HU and ASUS PB278 are two of the monitors showing this issue.
Signed-off-by: Cheng-Yi Chiang cychiang@chromium.org Signed-off-by: Daniel Kurtz djkurtz@chromium.org Signed-off-by: Yakir Yang ykk@rock-chips.com --- Change from v1 to v2: - Use audio_lock to protect audio clock.
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index aa7efd4da1c8..749d8e4c535b 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -1982,6 +1982,17 @@ static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi) HDMI_IH_MUTE_FC_STAT2); }
+static void dw_hdmi_audio_restore(struct dw_hdmi *hdmi) +{ + unsigned long flags; + + spin_lock_irqsave(&hdmi->audio_lock, flags); + + hdmi_enable_audio_clk(hdmi, hdmi->audio_enable); + + spin_unlock_irqrestore(&hdmi->audio_lock, flags); +} + static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode) { int ret; @@ -2045,7 +2056,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
/* HDMI Initialization Step E - Configure audio */ hdmi_clk_regenerator_update_pixel_clock(hdmi); - hdmi_enable_audio_clk(hdmi, true); + dw_hdmi_audio_restore(hdmi); }
/* not for DVI mode */