On Fri, Jul 08, 2016 at 05:04:55PM +0800, Chris Zhong wrote:
The dw-mipi-dsi of rk3399 is almost the same as rk3288, the rk3399 has additional phy config clock.
Signed-off-by: Chris Zhong zyw@rock-chips.com
.../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 1753f0c..4d59df3 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -5,6 +5,7 @@ Required properties:
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi".
- reg: Represent the physical address range of the controller.
- interrupts: Represent the controller's interrupt to the CPU(s).
- clocks, clock-names: Phandles to the controller's pll reference
@@ -13,6 +14,10 @@ Required properties:
- ports: contain a port node with endpoint definitions as defined in [2]. For vopb,set the reg = <0> and set the reg = <1> for vopl.
+Optional properties: +- clocks, clock-names: phandle to the dw-mipi phy clock, name should be
"phy_cfg".
This is not really optional. It is required for rk3399. Document with the rest of the clocks and note this one is rk3399 only.
Rob