On Tue, Jan 05, 2016 at 04:15:30PM -0500, Lyude wrote:
This fixes reprobing of display connectors on resume. After some talking with danvet on IRC, I learned that calling drm_helper_hpd_irq_event() does actually trigger a full reprobe of each connector's status. It turns out this is the actual reason reprobing on resume hasn't been working (this was observed on a T440s):
- We call hpd_init()
- We check each connector for a couple of things before marking connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an active encoder. Of course, a disconnected port won't have an active encoder, so we don't add the flag to any of the connectors.
- We call drm_helper_hpd_irq_event()
- drm_helper_irq_event() checks each connector for the DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1, so we skip reprobing each connector except for that one.
In addition, we now avoid setting connector->polled to DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is handled by the mst helpers. This is probably what was originally intended to happen here anyway.
Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)") Cc: stable@vger.kernel.org Signed-off-by: Lyude cpaul@redhat.com
Changes
- Use the explanation of the issue as the commit message instead
- Change the title of the commit, since this does more then just stop a check for an encoder now
- Add "Fixes" line for the patch that introduced this regression
- Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors
For drm/i915 I prefer when the patch changelog is above the s-o-b section, with v2: v3: ... headings.
drivers/gpu/drm/i915/intel_hotplug.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c index b177857..51ecf0b4 100644 --- a/drivers/gpu/drm/i915/intel_hotplug.c +++ b/drivers/gpu/drm/i915/intel_hotplug.c @@ -468,9 +468,9 @@ void intel_hpd_init(struct drm_i915_private *dev_priv) list_for_each_entry(connector, &mode_config->connector_list, head) { struct intel_connector *intel_connector = to_intel_connector(connector); connector->polled = intel_connector->polled;
if (connector->encoder && !connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)connector->polled = DRM_CONNECTOR_POLL_HPD;if (intel_connector->mst_port)
if (!connector->polled && !intel_connector->mst_port &&I915_HAS_HOTPLUG(dev) &&intel_connector->encoder->hpd_pin > HPD_NONE) connector->polled = DRM_CONNECTOR_POLL_HPD;
Hm, on 2nd thought we could clarify this further like this:
list_for_each_entry(...) { ... /* MST has a dynamic intel_connector->encoder and it's * reprobing is all handled by the MST helpers. */ if (intel_connector->mst_port) continue;
if (!connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE) connector->polled = DRM_CONNECTOR_POLL_HPD;
}
That yields even tidier code and gives us a place for a comment. Can you pls respin once more?
Thanks, Daniel
}
-- 2.5.0
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx