[ 0.000000] microcode: microcode updated early to revision 0x7, date = 2013-08-20 [ 0.000000] Linux version 4.18.0-rc1-1.g7262353-default+ (dieter@SunWave1) (gcc version 8.1.1 20180719 [gcc-8-branch revision 262874] (SUSE Linux)) #1 SMP PREEMPT Sat Aug 4 02:15:21 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc1-1.g7262353-default+ root=UUID=e19dd5e4-9df9-4ed6-8962-2d8f4993b6a5 video=1920x1080 noresume splash=silent quiet showopts nopti nospectre_v2 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7affff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f7b0000-0x000000007f7bbfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f7bc000-0x000000007f7bcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f7bd000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000067fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: FUJITSU PRIMERGY TX150 S7 /D2759, BIOS 6.00 Rev. 1.19.2759.A1 09/26/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x680000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 100000000 mask F00000000 write-back [ 0.000000] 2 base 200000000 mask E00000000 write-back [ 0.000000] 3 base 400000000 mask E00000000 write-back [ 0.000000] 4 base 600000000 mask F80000000 write-back [ 0.000000] 5 base 0FE000000 mask FFE000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0x7f7b0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f97c0-0x000f97cf] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 95000 size 24576 [ 0.000000] Kernel/User page tables isolation: disabled on command line. [ 0.000000] BRK [0x2e1802000, 0x2e1802fff] PGTABLE [ 0.000000] BRK [0x2e1803000, 0x2e1803fff] PGTABLE [ 0.000000] BRK [0x2e1804000, 0x2e1804fff] PGTABLE [ 0.000000] BRK [0x2e1805000, 0x2e1805fff] PGTABLE [ 0.000000] BRK [0x2e1806000, 0x2e1806fff] PGTABLE [ 0.000000] BRK [0x2e1807000, 0x2e1807fff] PGTABLE [ 0.000000] BRK [0x2e1808000, 0x2e1808fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3620b000-0x370fcfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F9790 000024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 0x000000007F7B4206 00010C (v01 PTLTD ? XSDT 00060000 LTP 00000000) [ 0.000000] ACPI: FACP 0x000000007F7B9D07 0000F4 (v03 FTS D2759/Ax 00060000 FTS 000F4240) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20180531/tbfadt-569) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20180531/tbfadt-569) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20180531/tbfadt-569) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20180531/tbfadt-569) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180531/tbfadt-674) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20180531/tbfadt-674) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20180531/tbfadt-674) [ 0.000000] ACPI: DSDT 0x000000007F7B4312 005981 (v01 FTS D2759 00060000 MSFT 03000001) [ 0.000000] ACPI: FACS 0x000000007F7BCFC0 000040 [ 0.000000] ACPI: FACS 0x000000007F7BCFC0 000040 [ 0.000000] ACPI: TCPA 0x000000007F7B9DFB 000032 (v01 Phoeni x 00060000 TL 00000000) [ 0.000000] ACPI: EINJ 0x000000007F7B9E2D 0001B0 (v01 PTL WHEAPTL 00060000 PTL 00000001) [ 0.000000] ACPI: HEST 0x000000007F7B9FDD 000268 (v01 PTL WHEAPTL 00060000 PTL 00000001) [ 0.000000] ACPI: BERT 0x000000007F7BA245 000030 (v01 PTL WHEAPTL 00060000 PTL 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA275 0000EB (v01 wheaos wheaosc 00060000 MSFT 03000001) [ 0.000000] ACPI: ERST 0x000000007F7BA360 000270 (v01 PTL WHEAPTL 00060000 PTL 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA5D0 00009E (v01 FSC CST_PR00 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA66E 00009E (v01 FSC CST_PR01 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA70C 00009E (v01 FSC CST_PR02 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA7AA 00009E (v01 FSC CST_PR03 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA848 00009E (v01 FSC CST_PR04 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA8E6 00009E (v01 FSC CST_PR05 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BA984 00009E (v01 FSC CST_PR06 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BAA22 00009E (v01 FSC CST_PR07 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BAAC0 000263 (v01 FSC PST_PR00 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BAD23 000263 (v01 FSC PST_PR01 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BAF86 000263 (v01 FSC PST_PR02 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BB1E9 000263 (v01 FSC PST_PR03 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BB44C 000263 (v01 FSC PST_PR04 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BB6AF 000263 (v01 FSC PST_PR05 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BB912 000263 (v01 FSC PST_PR06 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 0x000000007F7BBB75 000263 (v01 FSC PST_PR07 00060000 CSF 00000001) [ 0.000000] ACPI: SPCR 0x000000007F7BBDD8 000050 (v01 PTLTD $UCRTBL$ 00060000 PTL 00000001) [ 0.000000] ACPI: DMAR 0x000000007F7BBE28 000080 (v01 Intel OEMDMAR 00060000 LOHR 00000001) [ 0.000000] ACPI: MCFG 0x000000007F7BBEA8 00003C (v01 PTLTD MCFG 00060000 LTP 00000000) [ 0.000000] ACPI: HPET 0x000000007F7BBEE4 000038 (v01 PTLTD HPETTBL 00060000 LTP 00000001) [ 0.000000] ACPI: APIC 0x000000007F7BBF1C 0000BC (v01 PTLTD ? APIC 00060000 LTP 00000000) [ 0.000000] ACPI: BOOT 0x000000007F7BBFD8 000028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000067fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x67ffd5000-0x67ffeafff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000067fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f7affff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000067fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000067fffffff] [ 0.000000] On node 0 totalpages: 6289226 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8095 pages used for memmap [ 0.000000] DMA32 zone: 518064 pages, LIFO batch:31 [ 0.000000] Normal zone: 90112 pages used for memmap [ 0.000000] Normal zone: 5767168 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 102 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] ACPI: SPCR: SPCR table version 1 [ 0.000000] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000d7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f7b0000-0x7f7bbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f7bc000-0x7f7bcfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7f7bd000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s148248 r8192 d31976 u262144 [ 0.000000] pcpu-alloc: s148248 r8192 d31976 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6190934 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc1-1.g7262353-default+ root=UUID=e19dd5e4-9df9-4ed6-8962-2d8f4993b6a5 video=1920x1080 noresume splash=silent quiet showopts nopti nospectre_v2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 229376 bytes [ 0.000000] log_buf_len min size: 262144 bytes [ 0.000000] log_buf_len: 524288 bytes [ 0.000000] early log buf free: 248900(94%) [ 0.000000] Memory: 2138348K/25156904K available (10252K kernel code, 1507K rwdata, 3492K rodata, 1972K init, 1320K bss, 501404K reserved, 0K cma-reserved) [ 0.000000] ftrace: allocating 34233 entries in 134 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 36 [ 0.000000] DMAR: DRHD base: 0x000000fed14000 flags: 0x1 [ 0.000000] DMAR: dmar0: reg_base_addr fed14000 ver 1:0 cap c90780106f0462 ecap f02062 [ 0.000000] DMAR: RMRR base: 0x0000007f7f9000 end: 0x0000007f7f9fff [ 0.000000] DMAR: RMRR base: 0x0000007f7fa000 end: 0x0000007f7fafff [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2926.014 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2a2d4159f89, max_idle_ns: 440795269049 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.02 BogoMIPS (lpj=11704056) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] AppArmor: AppArmor initialized [ 0.034145] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.038156] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.038312] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.038456] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.038677] CPU: Physical Processor ID: 0 [ 0.038677] CPU: Processor Core ID: 0 [ 0.038685] mce: CPU supports 9 MCE banks [ 0.038691] CPU0: Thermal monitoring enabled (TM1) [ 0.038698] process: using mwait in idle threads [ 0.038701] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.038701] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.038703] Speculative Store Bypass: Vulnerable [ 0.038788] Freeing SMP alternatives memory: 32K [ 0.044000] smpboot: CPU0: Intel(R) Xeon(R) CPU X3470 @ 2.93GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.064017] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.064053] core: CPU erratum AAJ80 worked around [ 0.064054] core: CPUID marked event: 'bus cycles' unavailable [ 0.064058] ... version: 3 [ 0.064059] ... bit width: 48 [ 0.064060] ... generic registers: 4 [ 0.064062] ... value mask: 0000ffffffffffff [ 0.064063] ... max period: 000000007fffffff [ 0.064064] ... fixed-purpose events: 3 [ 0.064065] ... event mask: 000000070000000f [ 0.068011] Hierarchical SRCU implementation. [ 0.076240] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.080017] smp: Bringing up secondary CPUs ... [ 0.104058] x86: Booting SMP configuration: [ 0.104061] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.250506] smp: Brought up 1 node, 8 CPUs [ 0.250506] smpboot: Max logical packages: 1 [ 0.250506] smpboot: Total of 8 processors activated (46816.22 BogoMIPS) [ 0.260011] node 0 initialised, 5629288 pages in 4ms [ 0.260706] devtmpfs: initialized [ 0.260706] x86/mm: Memory block size: 128MB [ 0.264037] PM: Registering ACPI NVS region [mem 0x7f7bc000-0x7f7bcfff] (4096 bytes) [ 0.264102] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.264102] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.264112] pinctrl core: initialized pinctrl subsystem [ 0.264160] RTC time: 3:11:05, date: 08/04/18 [ 0.264252] NET: Registered protocol family 16 [ 0.264347] audit: initializing netlink subsys (disabled) [ 0.264356] audit: type=2000 audit(1533352264.264:1): state=initialized audit_enabled=0 res=1 [ 0.264356] cpuidle: using governor ladder [ 0.264356] cpuidle: using governor menu [ 0.264356] Simple Boot Flag at 0x50 set to 0x1 [ 0.264356] ACPI: bus type PCI registered [ 0.264356] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.264356] PCI: MMCONFIG for domain 0000 [bus 00-11] at [mem 0xe0000000-0xe11fffff] (base 0xe0000000) [ 0.264356] PCI: MMCONFIG at [mem 0xe0000000-0xe11fffff] reserved in E820 [ 0.264356] PCI: Using configuration type 1 for base access [ 0.264400] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.264400] mtrr: probably your BIOS does not setup all CPUs. [ 0.264401] mtrr: corrected configuration. [ 0.264401] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.264401] ACPI: Added _OSI(Module Device) [ 0.264401] ACPI: Added _OSI(Processor Device) [ 0.264401] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.264401] ACPI: Added _OSI(Processor Aggregator Device) [ 0.264401] ACPI: Added _OSI(Linux-Dell-Video) [ 0.269710] ACPI: 18 ACPI AML tables successfully acquired and loaded [ 0.283596] ACPI: Interpreter enabled [ 0.283612] ACPI: (supports S0 S1 S4 S5) [ 0.283613] ACPI: Using IOAPIC for interrupt routing [ 0.283646] [Firmware Warn]: HEST: Duplicated hardware error source ID: 9. [ 0.283661] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.283825] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.289501] ACPI: PCI Root Bridge [CPU0] (domain 0000 [bus ff]) [ 0.289506] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.289510] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.289518] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.289567] PCI host bridge to bus 0000:ff [ 0.289569] pci_bus 0000:ff: root bus resource [bus ff] [ 0.289575] pci 0000:ff:00.0: [8086:2c50] type 00 class 0x060000 [ 0.289623] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000 [ 0.289671] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000 [ 0.289710] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000 [ 0.289750] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000 [ 0.289788] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000 [ 0.289826] pci 0000:ff:03.2: [8086:2c9a] type 00 class 0x060000 [ 0.289865] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000 [ 0.289904] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000 [ 0.289942] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000 [ 0.289980] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000 [ 0.290017] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000 [ 0.290056] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000 [ 0.290095] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000 [ 0.290132] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000 [ 0.290171] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000 [ 0.290242] ACPI: PCI Root Bridge [CPU1] (domain 0000 [bus fe]) [ 0.290246] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.290250] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.290258] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.290303] PCI host bridge to bus 0000:fe [ 0.290305] pci_bus 0000:fe: root bus resource [bus fe] [ 0.290428] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d]) [ 0.290432] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.290436] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.290444] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-11] only partially covers this bridge [ 0.290532] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff]) [ 0.290775] PCI host bridge to bus 0000:00 [ 0.290776] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.290778] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.290779] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.290780] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.290781] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.290782] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfedfffff window] [ 0.290783] pci_bus 0000:00: root bus resource [mem 0xfef00000-0xffbfffff window] [ 0.290784] pci_bus 0000:00: root bus resource [bus 00-3d] [ 0.290791] pci 0000:00:00.0: [8086:d130] type 00 class 0x060000 [ 0.290887] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.290910] pci 0000:00:03.0: enabling Extended Tags [ 0.290939] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.291038] pci 0000:00:05.0: [8086:d13a] type 01 class 0x060400 [ 0.291060] pci 0000:00:05.0: enabling Extended Tags [ 0.291088] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.291185] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.291305] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.291421] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.291535] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.291640] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.291738] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.291852] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.291871] pci 0000:00:1a.0: reg 0x10: [mem 0xb0002000-0xb00023ff] [ 0.291946] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.292049] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.292114] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.292217] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400 [ 0.292282] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.292384] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.292404] pci 0000:00:1d.0: reg 0x10: [mem 0xb0003000-0xb00033ff] [ 0.292479] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.292575] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.292707] pci 0000:00:1f.0: [8086:3b14] type 00 class 0x060100 [ 0.292890] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.292906] pci 0000:00:1f.2: reg 0x10: [io 0x1870-0x1877] [ 0.292912] pci 0000:00:1f.2: reg 0x14: [io 0x1864-0x1867] [ 0.292918] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f] [ 0.292924] pci 0000:00:1f.2: reg 0x1c: [io 0x1860-0x1863] [ 0.292930] pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f] [ 0.292937] pci 0000:00:1f.2: reg 0x24: [mem 0xb0004000-0xb00047ff] [ 0.292973] pci 0000:00:1f.2: PME# supported from D3hot [ 0.293062] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.293078] pci 0000:00:1f.3: reg 0x10: [mem 0xb0005000-0xb00050ff 64bit] [ 0.293095] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f] [ 0.293244] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000 [ 0.293268] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.293277] pci 0000:01:00.0: reg 0x18: [mem 0xb0400000-0xb05fffff 64bit pref] [ 0.293283] pci 0000:01:00.0: reg 0x20: [io 0x2000-0x20ff] [ 0.293289] pci 0000:01:00.0: reg 0x24: [mem 0xb0140000-0xb017ffff] [ 0.293295] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.293301] pci 0000:01:00.0: enabling Extended Tags [ 0.293353] pci 0000:01:00.0: supports D1 D2 [ 0.293354] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.293434] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.293453] pci 0000:01:00.1: reg 0x10: [mem 0xb0100000-0xb0103fff 64bit] [ 0.293484] pci 0000:01:00.1: enabling Extended Tags [ 0.293523] pci 0000:01:00.1: supports D1 D2 [ 0.308032] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.308037] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.308041] pci 0000:00:03.0: bridge window [mem 0xb0100000-0xb01fffff] [ 0.308047] pci 0000:00:03.0: bridge window [mem 0xb0400000-0xcfffffff 64bit pref] [ 0.308109] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.308176] pci 0000:05:00.0: [1000:0072] type 00 class 0x010700 [ 0.308202] pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.308216] pci 0000:05:00.0: reg 0x14: [mem 0xb0200000-0xb0203fff 64bit] [ 0.308230] pci 0000:05:00.0: reg 0x1c: [mem 0xb0240000-0xb027ffff 64bit] [ 0.308248] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.308256] pci 0000:05:00.0: enabling Extended Tags [ 0.308327] pci 0000:05:00.0: supports D1 D2 [ 0.308356] pci 0000:05:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.308357] pci 0000:05:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff 64bit] (contains BAR0 for 16 VFs) [ 0.308370] pci 0000:05:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.308372] pci 0000:05:00.0: VF(n) BAR2 space: [mem 0x00000000-0x003fffff 64bit] (contains BAR2 for 16 VFs) [ 0.320025] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.320031] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.320036] pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb02fffff] [ 0.320128] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 0.320167] pci 0000:06:00.0: reg 0x10: [mem 0xb0320000-0xb033ffff] [ 0.320198] pci 0000:06:00.0: reg 0x18: [io 0x4000-0x401f] [ 0.320214] pci 0000:06:00.0: reg 0x1c: [mem 0xb0300000-0xb0303fff] [ 0.320360] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.332029] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.332034] pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff] [ 0.332039] pci 0000:00:1c.6: bridge window [mem 0xb0300000-0xb03fffff] [ 0.332068] pci_bus 0000:11: extended config space not accessible [ 0.332143] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode) [ 0.332150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.332152] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.332153] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.332154] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode) [ 0.332155] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.332156] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfedfffff window] (subtractive decode) [ 0.332157] pci 0000:00:1e.0: bridge window [mem 0xfef00000-0xffbfffff window] (subtractive decode) [ 0.332404] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 [ 0.332486] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11) [ 0.332571] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.332641] ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11) *0, disabled. [ 0.332723] ACPI: PCI Interrupt Link [LNKE] (IRQs 9 10 *11) [ 0.332804] ACPI: PCI Interrupt Link [LNKF] (IRQs 9 *10 11) [ 0.332885] ACPI: PCI Interrupt Link [LNKG] (IRQs *9 10 11) [ 0.332956] ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 11) *0, disabled. [ 0.336009] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.336011] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.336012] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.336013] vgaarb: loaded [ 0.336082] SCSI subsystem initialized [ 0.336096] libata version 3.00 loaded. [ 0.336096] pps_core: LinuxPPS API ver. 1 registered [ 0.336096] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.336096] PTP clock support registered [ 0.336096] EDAC MC: Ver: 3.0.0 [ 0.336118] PCI: Using ACPI for IRQ routing [ 0.336284] PCI: pci_cache_line_size set to 64 bytes [ 0.336332] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.336333] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff] [ 0.336334] e820: reserve RAM buffer [mem 0x7f7b0000-0x7fffffff] [ 0.336422] NetLabel: Initializing [ 0.336423] NetLabel: domain hash size = 128 [ 0.336423] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.336439] NetLabel: unlabeled traffic allowed by default [ 0.336442] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.336442] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.336442] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.336442] hpet: hpet2 irq 24 for MSI [ 0.336442] hpet: hpet3 irq 25 for MSI [ 0.336442] hpet: hpet4 irq 26 for MSI [ 0.336442] hpet: hpet5 irq 27 for MSI [ 0.336442] hpet: hpet6 irq 28 for MSI [ 0.336442] clocksource: Switched to clocksource tsc-early [ 0.347866] VFS: Disk quotas dquot_6.6.0 [ 0.347888] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.347990] AppArmor: AppArmor Filesystem Enabled [ 0.348010] pnp: PnP ACPI init [ 0.348196] system 00:00: [mem 0xe0000000-0xefffffff window] has been reserved [ 0.348201] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348557] system 00:01: [io 0x0200-0x020f] has been reserved [ 0.348559] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.348560] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.348562] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.348563] system 00:01: [io 0x0810-0x081f] has been reserved [ 0.348564] system 00:01: [io 0x0ca0-0x0ca1] has been reserved [ 0.348566] system 00:01: [io 0x0ca4-0x0ca7] has been reserved [ 0.348567] system 00:01: [io 0x0ca8-0x0cab] has been reserved [ 0.348568] system 00:01: [io 0x0cae-0x0caf] has been reserved [ 0.348570] system 00:01: [io 0x0e00-0x0e7f] has been reserved [ 0.348571] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.348573] system 00:01: [io 0x1100-0x110f] has been reserved [ 0.348574] system 00:01: [io 0x1180-0x11ff] has been reserved [ 0.348575] system 00:01: [io 0xfe00] has been reserved [ 0.348577] system 00:01: [io 0xff00] has been reserved [ 0.348578] system 00:01: [mem 0xfe710000-0xfe711fff] has been reserved [ 0.348580] system 00:01: [mem 0xfe713000-0xfe713fff] has been reserved [ 0.348581] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.348583] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.348584] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.348588] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348623] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.348923] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.349139] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.349214] pnp: PnP ACPI: found 5 devices [ 0.354931] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.354958] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.354965] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 0.354979] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.354982] pci 0000:00:1c.6: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.354985] pci 0000:01:00.0: BAR 6: assigned [mem 0xb0120000-0xb013ffff pref] [ 0.354987] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.354989] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.354991] pci 0000:00:03.0: bridge window [mem 0xb0100000-0xb01fffff] [ 0.354993] pci 0000:00:03.0: bridge window [mem 0xb0400000-0xcfffffff 64bit pref] [ 0.354997] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.355004] pci 0000:05:00.0: BAR 6: assigned [mem 0xb0280000-0xb02fffff pref] [ 0.355006] pci 0000:05:00.0: BAR 9: no space for [mem size 0x00400000 64bit] [ 0.355008] pci 0000:05:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit] [ 0.355009] pci 0000:05:00.0: BAR 7: no space for [mem size 0x00040000 64bit] [ 0.355010] pci 0000:05:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit] [ 0.355012] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 0.355013] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.355017] pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb02fffff] [ 0.355019] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.355023] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.355025] pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff] [ 0.355029] pci 0000:00:1c.6: bridge window [mem 0xb0300000-0xb03fffff] [ 0.355031] pci 0000:00:1c.6: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.355035] pci 0000:00:1e.0: PCI bridge to [bus 11] [ 0.355044] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.355045] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.355046] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.355047] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.355048] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.355049] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.355051] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfedfffff window] [ 0.355052] pci_bus 0000:00: resource 10 [mem 0xfef00000-0xffbfffff window] [ 0.355053] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.355054] pci_bus 0000:01: resource 1 [mem 0xb0100000-0xb01fffff] [ 0.355055] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xcfffffff 64bit pref] [ 0.355056] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.355057] pci_bus 0000:05: resource 1 [mem 0xb0200000-0xb02fffff] [ 0.355058] pci_bus 0000:05: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.355060] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.355061] pci_bus 0000:06: resource 1 [mem 0xb0300000-0xb03fffff] [ 0.355062] pci_bus 0000:06: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.355063] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window] [ 0.355064] pci_bus 0000:11: resource 5 [io 0x0d00-0xffff window] [ 0.355065] pci_bus 0000:11: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.355066] pci_bus 0000:11: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.355067] pci_bus 0000:11: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.355068] pci_bus 0000:11: resource 9 [mem 0xfed00000-0xfedfffff window] [ 0.355070] pci_bus 0000:11: resource 10 [mem 0xfef00000-0xffbfffff window] [ 0.355147] NET: Registered protocol family 2 [ 0.355277] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 0.355449] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.356040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.356294] TCP: Hash tables configured (established 262144 bind 65536) [ 0.356347] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.356550] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.356787] NET: Registered protocol family 1 [ 0.357272] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.357279] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.357319] PCI: CLS 32 bytes, default 64 [ 0.357353] Unpacking initramfs... [ 0.592009] random: fast init done [ 0.592010] random: fast init done [ 1.890122] Freeing initrd memory: 15304K [ 1.890188] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.890191] software IO TLB [mem 0x7b7b0000-0x7f7b0000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 1.890472] Scanning for low memory corruption every 60 seconds [ 1.891126] Initialise system trusted keyrings [ 1.891186] workingset: timestamp_bits=37 max_order=23 bucket_order=0 [ 1.891241] zbud: loaded [ 1.891498] pstore: using deflate compression [ 1.892464] Key type asymmetric registered [ 1.892465] Asymmetric key parser 'x509' registered [ 1.892482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.892515] io scheduler noop registered [ 1.892515] io scheduler deadline registered [ 1.892529] io scheduler cfq registered (default) [ 1.892529] io scheduler mq-deadline registered [ 1.892530] io scheduler kyber registered [ 1.893199] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.893199] vesafb: scrolling: redraw [ 1.893201] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.893214] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k [ 2.156561] Console: switching to colour frame buffer device 240x67 [ 2.418839] fb0: VESA VGA frame buffer device [ 2.418853] intel_idle: MWAIT substates: 0x1120 [ 2.418853] intel_idle: v0.4.1 model 0x1E [ 2.419099] intel_idle: lapic_timer_reliable_states 0x2 [ 2.419366] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.419426] pstore: Registered erst as persistent store backend [ 2.419427] GHES: HEST is not enabled! [ 2.419494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.440026] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.460619] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.461995] Non-volatile memory driver v1.3 [ 2.462014] Linux agpgart interface v0.103 [ 2.463506] ahci 0000:00:1f.2: version 3.0 [ 2.473944] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.473952] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ems apst [ 2.533026] scsi host0: ahci [ 2.533651] scsi host1: ahci [ 2.534261] scsi host2: ahci [ 2.534686] scsi host3: ahci [ 2.535139] scsi host4: ahci [ 2.535691] scsi host5: ahci [ 2.535778] ata1: SATA max UDMA/133 abar m2048@0xb0004000 port 0xb0004100 irq 29 [ 2.535781] ata2: SATA max UDMA/133 abar m2048@0xb0004000 port 0xb0004180 irq 29 [ 2.535783] ata3: SATA max UDMA/133 abar m2048@0xb0004000 port 0xb0004200 irq 29 [ 2.535785] ata4: SATA max UDMA/133 abar m2048@0xb0004000 port 0xb0004280 irq 29 [ 2.535788] ata5: SATA max UDMA/133 abar m2048@0xb0004000 port 0xb0004300 irq 29 [ 2.535790] ata6: SATA max UDMA/133 abar m2048@0xb0004000 port 0xb0004380 irq 29 [ 2.535844] i8042: PNP: No PS/2 controller found. [ 2.535844] i8042: Probing ports directly. [ 2.861652] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.862127] mousedev: PS/2 mouse device common for all mice [ 2.874747] ata1: SATA link down (SStatus 0 SControl 300) [ 2.874793] rtc_cmos 00:02: RTC can wake from S4 [ 2.892469] ata2: SATA link down (SStatus 0 SControl 300) [ 2.892528] rtc_cmos 00:02: registered as rtc0 [ 2.892580] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.892606] IR NEC protocol handler initialized [ 2.892607] IR RC5(x/sz) protocol handler initialized [ 2.892607] IR RC6 protocol handler initialized [ 2.892608] IR JVC protocol handler initialized [ 2.892609] IR Sony protocol handler initialized [ 2.892609] IR SANYO protocol handler initialized [ 2.892610] IR Sharp protocol handler initialized [ 2.892610] IR MCE Keyboard/mouse protocol handler initialized [ 2.892611] IR XMP protocol handler initialized [ 2.893568] ledtrig-cpu: registered to indicate activity on CPUs [ 2.893604] hidraw: raw HID events driver (C) Jiri Kosina [ 2.893803] NET: Registered protocol family 10 [ 2.899056] Segment Routing with IPv6 [ 2.900324] microcode: sig=0x106e5, pf=0x2, revision=0x7 [ 2.900700] microcode: Microcode Update Driver: v2.2. [ 2.900721] sched_clock: Marking stable (2900687580, 0)->(3269126720, -368439140) [ 2.900987] registered taskstats version 1 [ 2.900989] Loading compiled-in X.509 certificates [ 2.901007] zswap: loaded using pool lzo/zbud [ 2.904043] Key type big_key registered [ 2.905655] Key type encrypted registered [ 2.905658] AppArmor: AppArmor sha1 policy hashing enabled [ 2.906073] Magic number: 14:243:158 [ 2.906122] acpi device:25: hash matches [ 2.906236] rtc_cmos 00:02: setting system clock to 2018-08-04 03:11:08 UTC (1533352268) [ 2.907781] ata4: SATA link down (SStatus 0 SControl 300) [ 2.907806] ata6: SATA link down (SStatus 0 SControl 300) [ 2.907822] ata3: SATA link down (SStatus 0 SControl 300) [ 2.908108] tsc: Refined TSC clocksource calibration: 2925.981 MHz [ 2.908118] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2d228446b, max_idle_ns: 440795275274 ns [ 2.908195] clocksource: Switched to clocksource tsc [ 3.068153] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.069942] ata5.00: ATAPI: Optiarc DVD RW AD-7230S, 1.83, max UDMA/100 [ 3.072140] ata5.00: configured for UDMA/100 [ 3.074482] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7230S 1.83 PQ: 0 ANSI: 5 [ 3.103309] Freeing unused kernel memory: 1972K [ 3.103311] Write protecting the kernel read-only data: 16384k [ 3.104108] Freeing unused kernel memory: 2008K [ 3.105386] Freeing unused kernel memory: 604K [ 3.114051] pstore: crypto_comp_decompress failed, ret = -22! [ 3.115132] pstore: decompression failed: -22 [ 3.120887] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.140580] systemd[1]: Detected architecture x86-64. [ 3.140583] systemd[1]: Running in initial RAM disk. [ 3.147384] systemd[1]: Set hostname to . [ 3.185590] random: systemd: uninitialized urandom read (16 bytes read) [ 3.185602] systemd[1]: Reached target Timers. [ 3.185641] random: systemd: uninitialized urandom read (16 bytes read) [ 3.185949] systemd[1]: Created slice System Slice. [ 3.185966] random: systemd: uninitialized urandom read (16 bytes read) [ 3.186002] systemd[1]: Listening on udev Kernel Socket. [ 3.186075] systemd[1]: Listening on Journal Audit Socket. [ 3.186090] systemd[1]: Reached target Slices. [ 3.186147] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.190610] alua: device handler registered [ 3.190949] emc: device handler registered [ 3.191320] rdac: device handler registered [ 3.193703] device-mapper: uevent: version 1.0.3 [ 3.193798] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 3.195291] scsi 4:0:0:0: Attached scsi generic sg0 type 5 [ 3.427742] ACPI: bus type USB registered [ 3.427770] usbcore: registered new interface driver usbfs [ 3.427784] usbcore: registered new interface driver hub [ 3.428113] usbcore: registered new device driver usb [ 3.430853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.433296] ehci-pci: EHCI PCI platform driver [ 3.433535] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.433542] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.433554] ehci-pci 0000:00:1a.0: debug port 2 [ 3.437477] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported [ 3.437496] ehci-pci 0000:00:1a.0: irq 21, io mem 0xb0002000 [ 3.439359] mpt3sas version 25.100.00.00 loaded [ 3.439456] mpt3sas 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.440103] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (24675420 kB) [ 3.452211] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.452309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 3.452311] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.452312] usb usb1: Product: EHCI Host Controller [ 3.452313] usb usb1: Manufacturer: Linux 4.18.0-rc1-1.g7262353-default+ ehci_hcd [ 3.452315] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.452465] hub 1-0:1.0: USB hub found [ 3.452475] hub 1-0:1.0: 2 ports detected [ 3.452846] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.452853] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.452865] ehci-pci 0000:00:1d.0: debug port 2 [ 3.459417] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported [ 3.459440] ehci-pci 0000:00:1d.0: irq 20, io mem 0xb0003000 [ 3.461676] sr 4:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.461679] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.461831] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.472165] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.472248] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 3.472251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.472252] usb usb2: Product: EHCI Host Controller [ 3.472254] usb usb2: Manufacturer: Linux 4.18.0-rc1-1.g7262353-default+ ehci_hcd [ 3.472255] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.472403] hub 2-0:1.0: USB hub found [ 3.472418] hub 2-0:1.0: 2 ports detected [ 3.483348] [drm] amdgpu kernel modesetting enabled. [ 3.485012] AMD IOMMUv2 driver by Joerg Roedel [ 3.485013] AMD IOMMUv2 functionality not available on this system [ 3.486741] CRAT table not found [ 3.486743] Virtual CRAT table created for CPU [ 3.486744] Parsing CRAT table with 1 nodes [ 3.486745] Creating topology SYSFS entries [ 3.486761] Topology: Add CPU node [ 3.486762] Finished initializing topology [ 3.486821] kfd kfd: Initialized module [ 3.486984] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 3.486985] fb: switching to amdgpudrmfb from VESA VGA [ 3.497582] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 3.497594] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 3.497657] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 30 [ 3.497659] mpt2sas_cm0: iomem(0x00000000b0200000), mapped(0x(____ptrval____)), size(16384) [ 3.497660] mpt2sas_cm0: ioport(0x0000000000003000), size(256) [ 3.502545] random: crng init done [ 3.502546] random: 7 urandom warning(s) missed due to ratelimiting [ 3.554460] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 3.554463] mpt2sas_cm0: sending message unit reset !! [ 3.556091] mpt2sas_cm0: message unit reset: SUCCESS [ 3.593253] mpt2sas_cm0: Allocated physical memory: size(1687 kB) [ 3.593255] mpt2sas_cm0: Current Controller Queue Depth(3364),Max Controller Queue Depth(3432) [ 3.593255] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.639064] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.02.00) [ 3.639065] mpt2sas_cm0: Protocol=( [ 3.639065] Initiator [ 3.639065] ,Target [ 3.639066] ), [ 3.639066] Capabilities=( [ 3.639067] TLR [ 3.639067] ,EEDP [ 3.639067] ,Snapshot Buffer [ 3.639068] ,Diag Trace Buffer [ 3.639068] ,Task Set Full [ 3.639068] ,NCQ [ 3.639069] ) [ 3.639283] scsi host6: Fusion MPT SAS Host [ 3.639529] mpt2sas_cm0: sending port enable !! [ 3.642200] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b00650fca0), phys(8) [ 3.656103] mpt2sas_cm0: port enable: SUCCESS [ 3.657634] scsi 6:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 6 [ 3.657638] scsi 6:0:0:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x50025385a013b40d) [ 3.657639] scsi 6:0:0:0: enclosure logical id (0x500605b00650fca0), slot(2) [ 3.657857] scsi 6:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3.658682] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 3.659966] scsi 6:0:1:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 6 [ 3.659969] scsi 6:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50025385a023b094) [ 3.659970] scsi 6:0:1:0: enclosure logical id (0x500605b00650fca0), slot(3) [ 3.660155] scsi 6:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3.660244] sd 6:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.660843] sd 6:0:1:0: Attached scsi generic sg2 type 0 [ 3.661436] sd 6:0:0:0: [sda] Write Protect is off [ 3.661438] sd 6:0:0:0: [sda] Mode Sense: 7f 00 10 08 [ 3.661711] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.662001] sd 6:0:1:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.662827] scsi 6:0:2:0: Direct-Access ATA ST3160318AS CC49 PQ: 0 ANSI: 6 [ 3.662830] scsi 6:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x5000c5001fd96bdf) [ 3.662831] scsi 6:0:2:0: enclosure logical id (0x500605b00650fca0), slot(1) [ 3.662922] scsi 6:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3.663200] sd 6:0:1:0: [sdb] Write Protect is off [ 3.663202] sd 6:0:1:0: [sdb] Mode Sense: 7f 00 10 08 [ 3.663541] sd 6:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.665420] sda: sda1 [ 3.665556] sd 6:0:2:0: Attached scsi generic sg3 type 0 [ 3.666912] sdb: sdb1 [ 3.667583] scsi 6:0:3:0: Direct-Access ATA ST3160318AS CC49 PQ: 0 ANSI: 6 [ 3.667586] scsi 6:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x5000c5001fd9ce51) [ 3.667587] scsi 6:0:3:0: enclosure logical id (0x500605b00650fca0), slot(0) [ 3.667673] scsi 6:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3.668606] sd 6:0:0:0: [sda] Attached SCSI disk [ 3.669597] sd 6:0:2:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.670004] sd 6:0:1:0: [sdb] Attached SCSI disk [ 3.670330] sd 6:0:3:0: Attached scsi generic sg4 type 0 [ 3.674426] sd 6:0:3:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.713333] sd 6:0:2:0: [sdc] Write Protect is off [ 3.713334] sd 6:0:2:0: [sdc] Mode Sense: 7f 00 10 08 [ 3.717515] sd 6:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.718740] sd 6:0:3:0: [sdd] Write Protect is off [ 3.718742] sd 6:0:3:0: [sdd] Mode Sense: 7f 00 10 08 [ 3.722847] sd 6:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.752806] sdc: sdc1 [ 3.752909] Console: switching to colour dummy device 80x25 [ 3.753298] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE7). [ 3.753310] [drm] register mmio base: 0xB0140000 [ 3.753311] [drm] register mmio size: 262144 [ 3.753321] [drm] add ip block number 0 [ 3.753322] [drm] add ip block number 1 [ 3.753322] [drm] add ip block number 2 [ 3.753323] [drm] add ip block number 3 [ 3.753324] [drm] add ip block number 4 [ 3.753325] [drm] add ip block number 5 [ 3.753326] [drm] add ip block number 6 [ 3.753326] [drm] add ip block number 7 [ 3.753327] [drm] add ip block number 8 [ 3.753331] kfd kfd: skipped device 1002:67df, PCI rejects atomics [ 3.753340] [drm] UVD is enabled in VM mode [ 3.753341] [drm] UVD ENC is enabled in VM mode [ 3.753343] [drm] VCE enabled in VM mode [ 3.756398] ATOM BIOS: 113-1E3660U-O51 [ 3.756427] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 3.756465] amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 3.756466] amdgpu 0000:01:00.0: GART: 256M 0x0000000000000000 - 0x000000000FFFFFFF [ 3.756471] [drm] Detected VRAM RAM=8192M, BAR=256M [ 3.756472] [drm] RAM width 256bits GDDR5 [ 3.756609] [TTM] Zone kernel: Available graphics memory: 12337710 kiB [ 3.756610] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.756610] [TTM] Initializing pool allocator [ 3.756615] [TTM] Initializing DMA pool allocator [ 3.756647] [drm] amdgpu: 8192M of VRAM memory ready [ 3.756648] [drm] amdgpu: 8192M of GTT memory ready. [ 3.756658] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 3.756712] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000). [ 3.756830] [drm] Chained IB support enabled! [ 3.758048] sdd: sdd1 [ 3.758568] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 3.759874] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 3.785694] sd 6:0:2:0: [sdc] Attached SCSI disk [ 3.791070] sd 6:0:3:0: [sdd] Attached SCSI disk [ 3.792701] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.808026] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.816333] [drm] DM_PPLIB: values for Engine clock [ 3.816335] [drm] DM_PPLIB: 300000 [ 3.816335] [drm] DM_PPLIB: 600000 [ 3.816335] [drm] DM_PPLIB: 900000 [ 3.816336] [drm] DM_PPLIB: 1145000 [ 3.816336] [drm] DM_PPLIB: 1215000 [ 3.816336] [drm] DM_PPLIB: 1257000 [ 3.816337] [drm] DM_PPLIB: 1300000 [ 3.816337] [drm] DM_PPLIB: 1411000 [ 3.816338] [drm] DM_PPLIB: Validation clocks: [ 3.816338] [drm] DM_PPLIB: engine_max_clock: 141100 [ 3.816339] [drm] DM_PPLIB: memory_max_clock: 200000 [ 3.816339] [drm] DM_PPLIB: level : 8 [ 3.816340] [drm] DM_PPLIB: values for Memory clock [ 3.816341] [drm] DM_PPLIB: 300000 [ 3.816341] [drm] DM_PPLIB: 1000000 [ 3.816341] [drm] DM_PPLIB: 2000000 [ 3.816342] [drm] DM_PPLIB: Validation clocks: [ 3.816342] [drm] DM_PPLIB: engine_max_clock: 141100 [ 3.816343] [drm] DM_PPLIB: memory_max_clock: 200000 [ 3.816343] [drm] DM_PPLIB: level : 8 [ 3.825106] md/raid1:md0: active with 2 out of 2 mirrors [ 3.827050] md0: detected capacity change from 0 to 119377559552 [ 3.840119] [drm] Display Core initialized with v3.1.60! [ 3.865510] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.865511] [drm] Driver supports precise vblank timestamp query. [ 3.888166] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 3.893858] [drm] UVD and UVD ENC initialized successfully. [ 3.948414] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.948416] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.948691] hub 1-1:1.0: USB hub found [ 3.948784] hub 1-1:1.0: 6 ports detected [ 3.964459] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 [ 3.964461] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.964738] hub 2-1:1.0: USB hub found [ 3.964788] hub 2-1:1.0: 8 ports detected [ 3.993813] [drm] VCE initialized successfully. [ 3.996618] [drm] fb mappable at 0xC0D11000 [ 3.996619] [drm] vram apper at 0xC0000000 [ 3.996620] [drm] size 8294400 [ 3.996621] [drm] fb depth is 24 [ 3.996621] [drm] pitch is 7680 [ 3.996727] fbcon: amdgpudrmfb (fb0) is primary device [ 4.033796] Console: switching to colour frame buffer device 240x67 [ 4.038929] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device [ 4.060941] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:01:00.0 on minor 0 [ 4.160323] systemd-journald[206]: Received SIGTERM from PID 1 (systemd). [ 4.172598] systemd: 20 output lines suppressed due to ratelimiting [ 4.232418] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 4.236091] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 4.252120] usb 2-1.4: new full-speed USB device number 3 using ehci-pci [ 4.252408] systemd[1]: Detected architecture x86-64. [ 4.252877] systemd[1]: Set hostname to . [ 4.349973] usb 1-1.1: New USB device found, idVendor=04a9, idProduct=220d, bcdDevice= 1.00 [ 4.349975] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.349980] usb 1-1.1: Product: CanoScan [ 4.349981] usb 1-1.1: Manufacturer: Canon [ 4.365959] usb 2-1.4: New USB device found, idVendor=0e8f, idProduct=0008, bcdDevice= 1.09 [ 4.365961] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.365962] usb 2-1.4: Product: PS(R) Gamepad [ 4.365963] usb 2-1.4: Manufacturer: Gasia Co.,Ltd [ 4.380226] systemd[1]: nss-lookup.target: Dependency Before=nss-lookup.target dropped [ 4.428015] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 4.432157] systemd[1]: Stopped Switch Root. [ 4.432258] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart. [ 4.432329] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 4.432338] systemd[1]: Stopped Journal Service. [ 4.433278] systemd[1]: Starting Journal Service... [ 4.433818] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.444025] usb 2-1.6: new full-speed USB device number 4 using ehci-pci [ 4.467413] EXT4-fs (md0): re-mounted. Opts: discard,nobarrier [ 4.477010] systemd-journald[539]: Received request to flush runtime journal from PID 1 [ 4.539446] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=23.01 [ 4.539448] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.539449] usb 1-1.3: Product: USB Receiver [ 4.539450] usb 1-1.3: Manufacturer: Logitech [ 4.558204] acpi_cpufreq: P-state transition latency capped at 20 uS [ 4.567287] ACPI: AC Adapter [PSD] (on-line) [ 4.567733] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 4.567772] ACPI: Power Button [PWRB] [ 4.567822] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.567865] ACPI: Power Button [PWRF] [ 4.575497] ipmi message handler version 39.2 [ 4.577677] ipmi device interface [ 4.603489] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT) [ 4.603533] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 4.603553] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 4.604249] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.604869] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 4.618305] IPMI System Interface driver. [ 4.618329] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 4.618331] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 4.618332] ipmi_si: Adding SMBIOS-specified kcs state machine [ 4.618367] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 4.618415] ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 4.618417] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 4.618419] ipmi_si: Adding ACPI-specified kcs state machine [ 4.618473] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 4.620042] usb 1-1.4: new low-speed USB device number 5 using ehci-pci [ 4.636466] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.636468] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.636858] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.666820] usb 2-1.6: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=52.76 [ 4.666831] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.694931] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 4.704046] iTCO_vendor_support: vendor-support=0 [ 4.705867] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 4.711243] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.711299] iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x1060) [ 4.711782] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.732673] usbcore: registered new interface driver usbhid [ 4.732675] usbhid: USB HID core driver [ 4.734167] usb 1-1.4: New USB device found, idVendor=04b4, idProduct=0060, bcdDevice= 0.01 [ 4.734170] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.734171] usb 1-1.4: Product: USB Device [ 4.734172] usb 1-1.4: Manufacturer: Areson [ 4.736751] input: Gasia Co.,Ltd PS(R) Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:0E8F:0008.0001/input/input4 [ 4.736828] hid-generic 0003:0E8F:0008.0001: input,hidraw0: USB HID v1.10 Joystick [Gasia Co.,Ltd PS(R) Gamepad] on usb-0000:00:1d.0-1.4/input0 [ 4.737003] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52E.0002/input/input5 [ 4.740578] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.740580] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 4.741208] input: Areson USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04B4:0060.0004/input/input6 [ 4.752034] e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:19:99:77:b8:0c [ 4.752037] e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.752123] e1000e 0000:06:00.0 eth0: MAC: 3, PHY: 8, PBA No: 313132-030 [ 4.754212] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input7 [ 4.769312] Bluetooth: Core ver 2.22 [ 4.769329] NET: Registered protocol family 31 [ 4.769330] Bluetooth: HCI device and connection manager initialized [ 4.769333] Bluetooth: HCI socket layer initialized [ 4.769335] Bluetooth: L2CAP socket layer initialized [ 4.769342] Bluetooth: SCO socket layer initialized [ 4.779349] usbcore: registered new interface driver btusb [ 4.786340] md/raid1:md1: active with 2 out of 2 mirrors [ 4.800275] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input0 [ 4.800355] hid-generic 0003:04B4:0060.0004: input,hidraw2: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:1a.0-1.4/input0 [ 4.800394] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input8 [ 4.800475] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input9 [ 4.800539] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input10 [ 4.800578] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0003/input/input13 [ 4.800605] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input11 [ 4.800675] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0003/input/input14 [ 4.800699] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input12 [ 4.802844] hid-generic 0003:04B4:0060.0005: hiddev96,hidraw3: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:1a.0-1.4/input1 [ 4.814601] md1: detected capacity change from 0 to 159905742848 [ 4.860308] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0003/input/input15 [ 4.860528] hid-generic 0003:046D:C52E.0003: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1 [ 4.938039] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002880, prod_id: 0x0246, dev_id: 0x02) [ 5.328613] EXT4-fs (md1): barriers disabled [ 5.344525] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: nobarrier [ 5.613471] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 5.616997] IPMI SSIF Interface driver [ 5.621835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.621837] Bluetooth: BNEP filters: protocol multicast [ 5.621841] Bluetooth: BNEP socket layer initialized [ 6.106666] No iBFT detected. [ 9.057110] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 9.082114] NET: Registered protocol family 17 [ 10.831642] FS-Cache: Loaded [ 10.872192] RPC: Registered named UNIX socket transport module. [ 10.872194] RPC: Registered udp transport module. [ 10.872194] RPC: Registered tcp transport module. [ 10.872195] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.925581] FS-Cache: Netfs 'nfs' registered for caching [ 10.928946] Key type dns_resolver registered [ 10.971712] NFS: Registering the id_resolver key type [ 10.971720] Key type id_resolver registered [ 10.971721] Key type id_legacy registered [ 28.914920] Bluetooth: RFCOMM TTY layer initialized [ 28.914944] Bluetooth: RFCOMM socket layer initialized [ 28.914950] Bluetooth: RFCOMM ver 1.11 [ 29.983215] fuse init (API version 7.27) [ 2561.027575] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 2725.254267] usb 2-1.6: USB disconnect, device number 4 [ 2728.292964] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 2729.223765] usb 2-1.6: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=52.76 [ 2729.223769] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2729.432064] Bluetooth: hci0: hardware error 0x37 [ 2792.560167] usb 1-1.3: USB disconnect, device number 4 [ 2795.888172] usb 1-1.1: USB disconnect, device number 3 [ 2798.448162] usb 1-1.4: USB disconnect, device number 5 [ 2804.807794] usb 1-1.1: new full-speed USB device number 6 using ehci-pci [ 2804.917655] usb 1-1.1: New USB device found, idVendor=04a9, idProduct=220d, bcdDevice= 1.00 [ 2804.917660] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2804.917662] usb 1-1.1: Product: CanoScan [ 2804.917665] usb 1-1.1: Manufacturer: Canon [ 2810.951659] usb 1-1.3: new full-speed USB device number 7 using ehci-pci [ 2811.063710] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=23.01 [ 2811.063715] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2811.063717] usb 1-1.3: Product: USB Receiver [ 2811.063719] usb 1-1.3: Manufacturer: Logitech [ 2811.065923] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52E.0006/input/input20 [ 2811.124262] hid-generic 0003:046D:C52E.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input0 [ 2811.127082] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0007/input/input21 [ 2811.127386] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0007/input/input22 [ 2811.184060] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0007/input/input23 [ 2811.184645] hid-generic 0003:046D:C52E.0007: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1 [ 2829.127359] usb 1-1.4: new low-speed USB device number 8 using ehci-pci [ 2829.241638] usb 1-1.4: New USB device found, idVendor=04b4, idProduct=0060, bcdDevice= 0.01 [ 2829.241642] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2829.241645] usb 1-1.4: Product: USB Device [ 2829.241647] usb 1-1.4: Manufacturer: Areson [ 2829.246227] input: Areson USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04B4:0060.0008/input/input28 [ 2829.304057] hid-generic 0003:04B4:0060.0008: input,hidraw3: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:1a.0-1.4/input0 [ 2829.307196] hid-generic 0003:04B4:0060.0009: hiddev97,hidraw4: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:1a.0-1.4/input1 [ 2954.485566] INFO: task kworker/u16:2:6546 blocked for more than 480 seconds. [ 2954.485569] Not tainted 4.18.0-rc1-1.g7262353-default+ #1 [ 2954.485570] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2954.485571] kworker/u16:2 D 0 6546 2 0x80000000 [ 2954.485583] Workqueue: events_unbound commit_work [drm_kms_helper] [ 2954.485584] Call Trace: [ 2954.485591] ? __schedule+0x2a4/0x8b0 [ 2954.485593] ? common_interrupt+0xa/0xf [ 2954.485594] schedule+0x2f/0x90 [ 2954.485596] schedule_timeout+0x29e/0x3c0 [ 2954.485661] ? dce110_timing_generator_get_position+0x5b/0x70 [amdgpu] [ 2954.485698] ? dce110_timing_generator_get_crtc_scanoutpos+0x70/0xb0 [amdgpu] [ 2954.485702] dma_fence_default_wait+0x22f/0x2a0 [ 2954.485703] ? dma_fence_release+0xa0/0xa0 [ 2954.485704] dma_fence_wait_timeout+0x38/0x110 [ 2954.485706] reservation_object_wait_timeout_rcu+0x1f5/0x380 [ 2954.485743] amdgpu_dm_do_flip+0x112/0x340 [amdgpu] [ 2954.485782] amdgpu_dm_atomic_commit_tail+0x69a/0xcf0 [amdgpu] [ 2954.485784] ? wait_for_completion_timeout+0x5b/0x180 [ 2954.485786] ? put_prev_entity+0x2a/0x580 [ 2954.485788] ? __switch_to+0xa3/0x4e0 [ 2954.485792] commit_tail+0x3d/0x70 [drm_kms_helper] [ 2954.485794] process_one_work+0x19e/0x380 [ 2954.485796] ? rescuer_thread+0x330/0x330 [ 2954.485796] worker_thread+0x30/0x380 [ 2954.485798] ? rescuer_thread+0x330/0x330 [ 2954.485798] kthread+0x113/0x130 [ 2954.485800] ? kthread_create_worker_on_cpu+0x70/0x70 [ 2954.485801] ret_from_fork+0x1f/0x40