From: ChiaEn Wu chiaen_wu@richtek.com
Add Mediatek MT6370 Charger binding documentation.
Signed-off-by: ChiaEn Wu chiaen_wu@richtek.com ---
v3 - Add items and remove maxItems of io-channels - Add io-channel-names and describe each item - Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator" - Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator" --- .../power/supply/mediatek,mt6370-charger.yaml | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml new file mode 100644 index 0000000..f138db6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6370 Battery Charger + +maintainers: + - ChiaEn Wu chiaen_wu@richtek.com + +description: | + This module is part of the MT6370 MFD device. + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. + +properties: + compatible: + const: mediatek,mt6370-charger + + interrupts: + description: | + Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ + "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D" + are required. + items: + - description: BC1.2 done irq + - description: usb plug in irq + - description: mivr irq + + interrupt-names: + items: + - const: attach_i + - const: uvp_d_evt + - const: mivr + + io-channels: + description: | + Use ADC channel to read VBUS, IBUS, IBAT, etc., info. + minItems: 1 + items: + - description: | + VBUS voltage with lower accuracy (+-75mV) but higher measure + range (1~22V) + - description: | + VBUS voltage with higher accuracy (+-30mV) but lower measure + range (1~9.76V) + - description: the main system input voltage + - description: battery voltage + - description: battery temperature-sense input voltage + - description: IBUS current (required) + - description: battery current + - description: | + regulated output voltage to supply for the PWM low-side gate driver + and the bootstrap capacitor + - description: IC junction temperature + + io-channel-names: + items: + - const: vbusdiv5 + - const: vbusdiv2 + - const: vsys + - const: vbat + - const: ts_bat + - const: ibus + - const: ibat + - const: chg_vddp + - const: temp_jc + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + + properties: + enable-gpios: + maxItems: 1 + +required: + - compatible + - interrupts + - interrupt-names + - io-channels + +additionalProperties: false + +...