On Tue, 2020-08-04 at 18:55 +0200, Frank Wunderlich wrote:
From: Ryder Lee ryder.lee@mediatek.com
Add display subsystem related device nodes for MT7623.
Cc: CK Hu ck.hu@mediatek.com Signed-off-by: chunhui dai chunhui.dai@mediatek.com Signed-off-by: Bibby Hsieh bibby.hsieh@mediatek.com Signed-off-by: Ryder Lee ryder.lee@mediatek.com Signed-off-by: Frank Wunderlich frank-w@public-files.de Tested-by: Frank Wunderlich frank-w@public-files.de
changed v3->v4: drop display_components which is duplicate of existing mmsys v2->v3: drop bls to dpi routing
arch/arm/boot/dts/mt7623.dtsi | 170 ++++++++++++++++++ arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 72 ++++++++ arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 72 ++++++++ 3 files changed, 314 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index a106c0d90a52..f2cb44a69454 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -24,6 +24,11 @@ / { #address-cells = <2>; #size-cells = <2>;
- aliases {
rdma0 = &rdma0;rdma1 = &rdma1;- };
- cpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-shared;
@@ -321,6 +326,25 @@ pwrap: pwrap@1000d000 { clock-names = "spi", "wrap"; };
- mipi_tx0: mipi-dphy@10010000 {
compatible = "mediatek,mt7623-mipi-tx","mediatek,mt2701-mipi-tx";reg = <0 0x10010000 0 0x90>;clocks = <&clk26m>;clock-output-names = "mipi_tx0_pll";#clock-cells = <0>;#phy-cells = <0>;- };
Doesn't this (and some others) also need status="disabled" since they're not present on MT7623A? Or maybe it's time to split mt7623.dtsi into a mt7623n.dtsi which includes mt7623a.dtsi and adds the extra components?