29 Dec
2010
29 Dec
'10
9:53 p.m.
Doesn't change anything here. Display stays blank.
Sounds like your problem is separate from SSC then, more likely related to panel power or backlight control. Have you tried bisecting for the problem between 2.6.35 and 2.6.36?
Nevermind, I just checked out the bug, looks like it is panel power related. Can you try this patch?
If it doesn't work, can you send me the output of intel_reg_dumper from before you turn off the display and after you try to turn it back on?
Thanks,
--
Jesse Barnes, Intel Open Source Technology Center
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index aa23070..830e3b0 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -82,8 +82,6 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds)
lvds_reg = LVDS;
}
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
-
if (intel_lvds->pfit_dirty) {
/*
* Enable automatic panel scaling so that non-native modes
@@ -104,7 +102,7 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds)
}
I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
- POSTING_READ(lvds_reg);
+ POSTING_READ(ctl_reg);
intel_panel_set_backlight(dev, dev_priv->backlight_level);
}
@@ -136,8 +134,7 @@ static void intel_lvds_disable(struct intel_lvds *intel_lvds)
intel_lvds->pfit_dirty = true;
}
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
- POSTING_READ(lvds_reg);
+ POSTING_READ(ctl_reg);
}
static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)