Re: [PATCH 10/10] drm/exynos/decon5433: add support for DECON-TV

On 10/23/2015 01:55 PM, Inki Dae wrote:

Hi Andrzej,

2015년 10월 20일 18:22에 Andrzej Hajda 이(가) 쓴 글:

...

DECON-TV IP is responsible for generating video stream which is transferred to HDMI IP. It is almost fully compatible with DECON IP.

The patch is based on initial work of Hyungwon Hwang.

Signed-off-by: Andrzej Hajda a.hajda@samsung.com

drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 154 ++++++++++++++++---------- include/video/exynos5433_decon.h | 29 +++++ 2 files changed, 122 insertions(+), 61 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 3c9aa4e..fbe1b31 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/component.h> +#include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pm_runtime.h>

@@ -37,6 +38,12 @@ static const char * const decon_clks_name[] = { "sclk_decon_eclk", };

+enum decon_iftype {

• IFTYPE_RGB,
• IFTYPE_I80,
• IFTYPE_HDMI

+};

• enum decon_flag_bits { BIT_CLKS_ENABLED, BIT_IRQS_ENABLED,

@@ -53,7 +60,8 @@ struct decon_context { struct clk *clks[ARRAY_SIZE(decon_clks_name)]; int pipe; unsigned long flags;

• bool i80_if;

• enum decon_iftype out_type;

• int first_win; };

  static const uint32_t decon_formats[] = {

@@ -80,7 +88,7 @@ static int decon_enable_vblank(struct exynos_drm_crtc *crtc)

if (test_and_set_bit(BIT_IRQS_ENABLED, &ctx->flags)) { val = VIDINTCON0_INTEN;

• if (ctx->i80_if)
  

• if (ctx->out_type == IFTYPE_I80)
  val |= VIDINTCON0_FRAMEDONE;
  

  else val |= VIDINTCON0_INTFRMEN;

@@ -104,8 +112,11 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc)

static void decon_setup_trigger(struct decon_context *ctx) {

• u32 val = TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |

• 	TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN;
  

• u32 val = (ctx->out_type != IFTYPE_HDMI)

• ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
  

•   TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN
  

• : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
  

•   TRIGCON_HWTRIGMASK_I80_RGB | TRIGCON_HWTRIGEN_I80_RGB;
  

  writel(val, ctx->addr + DECON_TRIGCON); }

@@ -118,13 +129,22 @@ static void decon_commit(struct exynos_drm_crtc *crtc) if (test_bit(BIT_SUSPENDED, &ctx->flags)) return;

• if (ctx->out_type == IFTYPE_HDMI) {

• m->crtc_hsync_start = m->crtc_hdisplay + 10;
  

• m->crtc_hsync_end = m->crtc_htotal - 92;
  

• m->crtc_vsync_start = m->crtc_vdisplay + 1;
  

• m->crtc_vsync_end = m->crtc_vsync_start + 1;
  

• }

• decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID, 0);

• /* enable clock gate */ val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; writel(val, ctx->addr + DECON_CMU);

  /* lcd on and use command if */ val = VIDOUT_LCD_ON;

• if (ctx->i80_if)

• if (ctx->out_type == IFTYPE_I80) val |= VIDOUT_COMMAND_IF; else val |= VIDOUT_RGB_IF;

@@ -134,7 +154,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) VIDTCON2_HOZVAL(m->hdisplay - 1); writel(val, ctx->addr + DECON_VIDTCON2);

• if (!ctx->i80_if) {

• if (ctx->out_type != IFTYPE_I80) { val = VIDTCON00_VBPD_F( m->crtc_vtotal - m->crtc_vsync_end - 1) | VIDTCON00_VFPD_F(

@@ -159,15 +179,9 @@ static void decon_commit(struct exynos_drm_crtc *crtc) decon_setup_trigger(ctx);

/* enable output and display signal */

• val = VIDCON0_ENVID | VIDCON0_ENVID_F;
• writel(val, ctx->addr + DECON_VIDCON0);

• decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0); }

-#define COORDINATE_X(x) (((x) & 0xfff) << 12) -#define COORDINATE_Y(x) ((x) & 0xfff) -#define OFFSIZE(x) (((x) & 0x3fff) << 14) -#define PAGEWIDTH(x) ((x) & 0x3fff)

• static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, struct drm_framebuffer *fb) {

@@ -238,6 +252,10 @@ static void decon_atomic_begin(struct exynos_drm_crtc *crtc, decon_shadow_protect_win(ctx, plane->zpos, true); }

+#define BIT_VAL(x, e, s) (((x) & ((1 << ((e) - (s) + 1)) - 1)) << (s)) +#define COORDINATE_X(x) BIT_VAL((x), 23, 12) +#define COORDINATE_Y(x) BIT_VAL((x), 11, 0)

• static void decon_update_plane(struct exynos_drm_crtc *crtc, struct exynos_drm_plane *plane) {

@@ -271,8 +289,12 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc, val = plane->dma_addr[0] + pitch * plane->crtc_h; writel(val, ctx->addr + DECON_VIDW0xADD1B0(win));

• val = OFFSIZE(pitch - plane->crtc_w * bpp)

• | PAGEWIDTH(plane->crtc_w * bpp);
  

• if (ctx->out_type != IFTYPE_HDMI)

• val = BIT_VAL(pitch - plane->crtc_w * bpp, 27, 14)
  

• 	| BIT_VAL(plane->crtc_w * bpp, 13, 0);
  

• else

• val = BIT_VAL(pitch - plane->crtc_w * bpp, 29, 15)
  

• 	| BIT_VAL(plane->crtc_w * bpp, 14, 0);
  

  writel(val, ctx->addr + DECON_VIDW0xADD2(win));

  decon_win_set_pixfmt(ctx, win, state->fb);

@@ -314,7 +336,7 @@ static void decon_atomic_flush(struct exynos_drm_crtc *crtc,

decon_shadow_protect_win(ctx, plane->zpos, false);

• if (ctx->i80_if)

• if (ctx->out_type == IFTYPE_I80) set_bit(BIT_WIN_UPDATED, &ctx->flags); }

@@ -339,6 +361,17 @@ static void decon_swreset(struct decon_context *ctx) }

WARN(tries == 0, "failed to software reset DECON\n");

• if (ctx->out_type != IFTYPE_HDMI)

• return;
  

• writel(VIDCON0_CLKVALUP | VIDCON0_VLCKFREE, ctx->addr + DECON_VIDCON0);

• decon_set_bits(ctx, DECON_CMU,

•        CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F, ~0);
  

• writel(VIDCON1_VCLK_RUN_VDEN_DISABLE, ctx->addr + DECON_VIDCON1);

• writel(CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F | CRCCTRL_CRCCLKEN,

•       ctx->addr + DECON_CRCCTRL);
  

• decon_setup_trigger(ctx); }

  static void decon_enable(struct exynos_drm_crtc *crtc)

@@ -387,7 +420,7 @@ static void decon_disable(struct exynos_drm_crtc *crtc) * suspend that connector. Otherwise we might try to scan from * a destroyed buffer later. */

• for (i = 0; i < WINDOWS_NR; i++)

• for (i = ctx->first_win; i < WINDOWS_NR; i++) decon_disable_plane(crtc, &ctx->planes[i]);

  decon_swreset(ctx);

@@ -461,25 +494,30 @@ static int decon_bind(struct device *dev, struct device *master, void *data) struct drm_device *drm_dev = data; struct exynos_drm_private *priv = drm_dev->dev_private; struct exynos_drm_plane *exynos_plane;

• enum exynos_drm_output_type out_type; enum drm_plane_type type;

• unsigned int zpos;

• unsigned int win; int ret;

  ctx->drm_dev = drm_dev; ctx->pipe = priv->pipe++;

• for (zpos = 0; zpos < WINDOWS_NR; zpos++) {

• type = exynos_plane_get_type(zpos, CURSOR_WIN);
  

• ret = exynos_plane_init(drm_dev, &ctx->planes[zpos],
  

• for (win = ctx->first_win; win < WINDOWS_NR; win++) {

• int tmp = (win == ctx->first_win) ? 0 : win;
  

AFAIK, DECON TV for Exynos5433 SoC has four hardware overlays so I guess you used ctx->first_win to initialize four planes in case of IFTYPE_HDMI.

However, with IFTYPE_HDMI ctx->first_win has 1, as a result, ctx->planes[] will have 0, 2nd, 3rd and 4th planes and this means we should use 0, 2nd ~ 4th hardware overlay excepting 1st overlay. Is this your intention? Shouldn't ctx->planes[] have 1st, 2nd ,3rd and 4th planes so that we can use 1st ~ 4th hardware overlay for DECON TV?

DECON TV for Exynos5433 SoC can use only 1st ~ 4th hardware overlays.

And other thing, it may be trivial but I think it'd be better to use 'ovl' instead of 'tmp.

DECON-TV has hardware window 0 with very limited functionality, it is just background color, no scanout buffers. So it cannot be used as drm plane. ctx->first_win contains value of the 1st valid window. There is a question how to map windows to planes. I have chosen the simplest solution - n'th hw window is mapped to n'th plane and have zpos==n. The only problem is with function exynos_plane_get_type, which returns DRM_PLANE_TYPE_PRIMARY only if their 1st argument is equal 0, ie it assumes default window is always 0. As an simple workaround I used 'tmp' variable which maps 1st window to 0. This way exynos_plane_get_type returns expected value for all windows. I plan replace this workaround with something nicer, but as it would involve changes in other drivers I left this as TODO for later. Regarding ctx->planes[], it is static array so it will have always one entry invalid in case of TV, with this approach it will be th 0th entry, but with a gain of consistency in windows/zpos/planes numbering. If you prefer different approach please let me know.

Regards Andrzej

Thanks, Inki Dae