On 15/04/2022 01:16, Abhinav Kumar wrote:
On 2/4/2022 3:19 PM, Dmitry Baryshkov wrote:
On 05/02/2022 00:17, Abhinav Kumar wrote:
Introduce the dpu_encoder_phys_* for the writeback interface to handle writeback specific hardware programming.
Signed-off-by: Abhinav Kumar quic_abhinavk@quicinc.com
Mostly looks ok, see minor comments bellow.
drivers/gpu/drm/msm/Makefile | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 36 +- .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 813 +++++++++++++++++++++ 3 files changed, 849 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile index c43ef35..3abaf84 100644 --- a/drivers/gpu/drm/msm/Makefile +++ b/drivers/gpu/drm/msm/Makefile @@ -53,6 +53,7 @@ msm-y := \ disp/dpu1/dpu_encoder.o \ disp/dpu1/dpu_encoder_phys_cmd.o \ disp/dpu1/dpu_encoder_phys_vid.o \ + disp/dpu1/dpu_encoder_phys_wb.o \ disp/dpu1/dpu_formats.o \ disp/dpu1/dpu_hw_catalog.o \ disp/dpu1/dpu_hw_ctl.o \ diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h index 7b3354d..80da0a9 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h @@ -159,6 +159,7 @@ struct dpu_encoder_phys_ops { * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel
- @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector
*/ enum dpu_intr_idx { INTR_IDX_VSYNC, @@ -166,6 +167,7 @@ enum dpu_intr_idx { INTR_IDX_UNDERRUN, INTR_IDX_CTL_START, INTR_IDX_RDPTR, + INTR_IDX_WB_DONE, INTR_IDX_MAX, }; @@ -196,7 +198,7 @@ struct dpu_encoder_irq { * @hw_ctl: Hardware interface to the ctl registers * @hw_pp: Hardware interface to the ping pong registers * @hw_intf: Hardware interface to the intf registers
- @hw_wb: Hardware interface to the wb registers
- @hw_wb: Hardware interface to the wb registers
* @dpu_kms: Pointer to the dpu_kms top level * @cached_mode: DRM mode cached at mode_set time, acted on in enable * @enabled: Whether the encoder has enabled and running a mode @@ -250,6 +252,31 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) } /**
- struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to
handle command
- * mode specific operations
- @base: Baseclass physical encoder structure
- @wbirq_refcount: Reference count of writeback interrupt
- @wb_done_timeout_cnt: number of wb done irq timeout errors
- @wb_cfg: writeback block config to store fb related details
- @cdp_cfg: chroma down prefetch block config for wb
- @aspace: address space to be used for wb framebuffer
- @wb_conn: backpointer to writeback connector
- @wb_job: backpointer to current writeback job
- @dest: dpu buffer layout for current writeback output buffer
- */
+struct dpu_encoder_phys_wb { + struct dpu_encoder_phys base; + atomic_t wbirq_refcount; + int wb_done_timeout_cnt; + struct dpu_hw_wb_cfg wb_cfg; + struct dpu_hw_wb_cdp_cfg cdp_cfg;
What about moving them to the stack rather storing them in the structure?
Yes cdp_cfg can be moved to the stack. Will do it in the next version.
wb_cfg cannot because for drm_wb, prepare_wb_job has the job's fb attributes which are used to setup the wb.
But we commit it only in the encoder_kickoff in dpu_encoder_phys_wb_setup_fb().
So its shared across two methods.
+ struct msm_gem_address_space *aspace; + struct drm_writeback_connector *wb_conn; + struct drm_writeback_job *wb_job; + struct dpu_hw_fmt_layout dest; +};
+/** * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command * mode specific operations * @base: Baseclass physical encoder structure @@ -317,6 +344,13 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( struct dpu_enc_phys_init_params *p); /**
- dpu_encoder_phys_wb_init - initialize writeback encoder
- @init: Pointer to init info structure with initialization params
- */
+struct dpu_encoder_phys *dpu_encoder_phys_wb_init( + struct dpu_enc_phys_init_params *p);
+/** * dpu_encoder_helper_trigger_start - control start helper function * This helper function may be optionally specified by physical * encoders if they require ctl_start triggering. diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c new file mode 100644 index 0000000..783f83e --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c @@ -0,0 +1,813 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*
- Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
reserved.
- */
+#define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__
+#include <linux/debugfs.h>
the header is unused
ack
+#include "dpu_encoder_phys.h" +#include "dpu_formats.h" +#include "dpu_hw_top.h" +#include "dpu_hw_wb.h" +#include "dpu_hw_lm.h" +#include "dpu_hw_blk.h" +#include "dpu_hw_merge3d.h" +#include "dpu_hw_interrupts.h" +#include "dpu_core_irq.h" +#include "dpu_vbif.h" +#include "dpu_crtc.h" +#include "disp/msm_disp_snapshot.h"
+#define DEFAULT_MAX_WRITEBACK_WIDTH 2048
+#define to_dpu_encoder_phys_wb(x) \ + container_of(x, struct dpu_encoder_phys_wb, base)
+/**
- dpu_encoder_phys_wb_is_master - report wb always as master encoder
- */
+static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys *phys_enc) +{ + return true; +}
A comment that there is only one physical enc for WB would be helpful here. But maybe we should just pull a generic is_master into dpu_encoder_phys.h (it would work here too).
I am just following what we have today for phys_vid and phys_cmd. But yes, I can leave a comment for sure.
+/**
- dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback
interface
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_set_ot_limit( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + struct dpu_vbif_set_ot_params ot_params;
+ memset(&ot_params, 0, sizeof(ot_params)); + ot_params.xin_id = hw_wb->caps->xin_id; + ot_params.num = hw_wb->idx - WB_0; + ot_params.width = phys_enc->cached_mode.hdisplay; + ot_params.height = phys_enc->cached_mode.vdisplay; + ot_params.is_wfd = true; + ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode); + ot_params.vbif_idx = hw_wb->caps->vbif_idx; + ot_params.clk_ctrl = hw_wb->caps->clk_ctrl; + ot_params.rd = false;
+ dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params); +}
+/**
- dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_set_qos_remap( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_vbif_set_qos_params qos_params;
+ if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) { + DPU_ERROR("invalid arguments\n"); + return; + }
+ if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) { + DPU_ERROR("invalid writeback hardware\n"); + return; + }
+ hw_wb = phys_enc->hw_wb;
+ memset(&qos_params, 0, sizeof(qos_params)); + qos_params.vbif_idx = hw_wb->caps->vbif_idx; + qos_params.xin_id = hw_wb->caps->xin_id; + qos_params.clk_ctrl = hw_wb->caps->clk_ctrl; + qos_params.num = hw_wb->idx - WB_0; + qos_params.is_rt = false;
+ DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n", + qos_params.num, + qos_params.vbif_idx, + qos_params.xin_id, qos_params.is_rt);
+ dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params); +}
+//this can be moved to some common file?
C99 comment and missing "FIXME: " :-D
Yes I will remove this since i am addressing this now.
Yes, let's pull it into dpu_hw_util.c
And if you (by chance) would see a value in unifying other QoS/CDP-related functions let's move them to the dpu_hw_util.c too.
Yes I think I can move some utility functions like below to the util file. Will take care of it in next version.
+static u64 _dpu_encoder_phys_wb_get_qos_lut(struct dpu_qos_lut_tbl *tbl, + u32 total_fl) +{ + int i;
+ if (!tbl || !tbl->nentry || !tbl->entries) + return 0;
+ for (i = 0; i < tbl->nentry; i++) + if (total_fl <= tbl->entries[i].fl) + return tbl->entries[i].lut;
+ /* if last fl is zero, use as default */ + if (!tbl->entries[i-1].fl) + return tbl->entries[i-1].lut;
+ return 0; +}
+/**
- dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for writeback
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_hw_wb_qos_cfg qos_cfg; + struct dpu_mdss_cfg *catalog; + struct dpu_qos_lut_tbl *qos_lut_tb;
+ if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) { + DPU_ERROR("invalid parameter(s)\n"); + return; + }
+ catalog = phys_enc->dpu_kms->catalog;
+ hw_wb = phys_enc->hw_wb;
+ memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg)); + qos_cfg.danger_safe_en = true; + qos_cfg.danger_lut = + catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
+ qos_cfg.safe_lut = catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
+ qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT]; + qos_cfg.creq_lut = _dpu_encoder_phys_wb_get_qos_lut(qos_lut_tb, 0);
+ if (hw_wb->ops.setup_qos_lut) + hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg); +}
+/**
- dpu_encoder_phys_wb_setup_fb - setup output framebuffer
- @phys_enc: Pointer to physical encoder
- @fb: Pointer to output framebuffer
- @wb_roi: Pointer to output region of interest
- */
+static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc, + struct drm_framebuffer *fb) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + struct dpu_hw_wb *hw_wb; + struct dpu_hw_wb_cfg *wb_cfg; + struct dpu_hw_wb_cdp_cfg *cdp_cfg;
+ if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog || + !phys_enc->connector) { + DPU_ERROR("invalid encoder\n"); + return; + }
+ hw_wb = phys_enc->hw_wb; + wb_cfg = &wb_enc->wb_cfg; + cdp_cfg = &wb_enc->cdp_cfg;
+ wb_cfg->intf_mode = phys_enc->intf_mode; + wb_cfg->roi.x1 = 0; + wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay; + wb_cfg->roi.y1 = 0; + wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay;
+ if (hw_wb->ops.setup_roi) + hw_wb->ops.setup_roi(hw_wb, wb_cfg);
+ if (hw_wb->ops.setup_outformat) + hw_wb->ops.setup_outformat(hw_wb, wb_cfg);
+ if (hw_wb->ops.setup_cdp) { + memset(cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg));
+ cdp_cfg->enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg + [DPU_PERF_CDP_USAGE_NRT].wr_enable; + cdp_cfg->ubwc_meta_enable = + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format); + cdp_cfg->tile_amortize_enable = + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) || + DPU_FORMAT_IS_TILE(wb_cfg->dest.format); + cdp_cfg->preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64;
+ hw_wb->ops.setup_cdp(hw_wb, cdp_cfg); + }
+ if (hw_wb->ops.setup_outaddress) + hw_wb->ops.setup_outaddress(hw_wb, wb_cfg); +}
+/**
- dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block
- @phys_enc:Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_hw_ctl *ctl;
+ if (!phys_enc) { + DPU_ERROR("invalid encoder\n"); + return; + }
+ hw_wb = phys_enc->hw_wb; + ctl = phys_enc->hw_ctl;
+ if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && + (phys_enc->hw_ctl && + phys_enc->hw_ctl->ops.setup_intf_cfg)) { + struct dpu_hw_intf_cfg intf_cfg = {0}; + struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp; + enum dpu_3d_blend_mode mode_3d;
+ mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+ intf_cfg.intf = DPU_NONE; + intf_cfg.wb = hw_wb->idx;
+ if (mode_3d && hw_pp && hw_pp->merge_3d) + intf_cfg.merge_3d = hw_pp->merge_3d->idx;
+ if (phys_enc->hw_pp->merge_3d && phys_enc->hw_pp->merge_3d->ops.setup_3d_mode)
phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, + mode_3d);
+ /* setup which pp blk will connect to this wb */ + if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk) + phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, true, + phys_enc->hw_pp->idx);
+ phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, + &intf_cfg, true); + } else if (phys_enc->hw_ctl && phys_enc->hw_ctl->ops.setup_intf_cfg) { + struct dpu_hw_intf_cfg intf_cfg = {0};
+ intf_cfg.intf = DPU_NONE; + intf_cfg.wb = hw_wb->idx; + intf_cfg.mode_3d = + dpu_encoder_helper_get_3d_blend_mode(phys_enc); + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg, true); + } +}
+/**
- dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic
states
- @phys_enc: Pointer to physical encoder
- @crtc_state: Pointer to CRTC atomic state
- @conn_state: Pointer to connector atomic state
- */
+static int dpu_encoder_phys_wb_atomic_check( + struct dpu_encoder_phys *phys_enc, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct drm_framebuffer *fb; + const struct drm_display_mode *mode;
+ DPU_DEBUG("[atomic_check:%d, "%s",%d,%d]\n", + phys_enc->intf_idx, mode->name, mode->hdisplay, mode->vdisplay);
+ if (!conn_state->writeback_job || !conn_state->writeback_job->fb) + return 0;
+ fb = conn_state->writeback_job->fb; + mode = &crtc_state->mode;
+ if (!conn_state || !conn_state->connector) { + DPU_ERROR("invalid connector state\n"); + return -EINVAL; + } else if (conn_state->connector->status != + connector_status_connected) { + DPU_ERROR("connector not connected %d\n", + conn_state->connector->status); + return -EINVAL; + }
+ DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id, + fb->width, fb->height);
+ if (fb->width != mode->hdisplay) { + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width, + mode->hdisplay); + return -EINVAL; + } else if (fb->height != mode->vdisplay) { + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height, + mode->vdisplay); + return -EINVAL; + } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) { + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n", + fb->width, DEFAULT_MAX_WRITEBACK_WIDTH); + return -EINVAL; + }
+ return 0; +}
+/**
- _dpu_encoder_phys_wb_update_flush - flush hardware update
- @phys_enc: Pointer to physical encoder
- */
+static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb; + struct dpu_hw_ctl *hw_ctl; + struct dpu_hw_pingpong *hw_pp; + u32 pending_flush = 0;
+ if (!phys_enc) + return;
+ hw_wb = phys_enc->hw_wb; + hw_pp = phys_enc->hw_pp; + hw_ctl = phys_enc->hw_ctl;
+ DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
+ if (!hw_ctl) { + DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0); + return; + }
+ if (hw_ctl->ops.update_pending_flush_wb) + hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx);
+ if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && hw_pp->merge_3d) + hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl, + hw_pp->merge_3d->idx);
+ if (hw_ctl->ops.get_pending_flush) + pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl);
+ DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n", + hw_ctl->idx - CTL_0, pending_flush, + hw_wb->idx - WB_0); +}
+/**
- dpu_encoder_phys_wb_setup - setup writeback encoder
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_setup( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + struct drm_display_mode mode = phys_enc->cached_mode; + struct drm_framebuffer *fb = NULL;
+ DPU_DEBUG("[mode_set:%d, "%s",%d,%d]\n", + hw_wb->idx - WB_0, mode.name, + mode.hdisplay, mode.vdisplay);
+ dpu_encoder_phys_wb_set_ot_limit(phys_enc);
+ dpu_encoder_phys_wb_set_qos_remap(phys_enc);
+ dpu_encoder_phys_wb_set_qos(phys_enc);
+ dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
+ dpu_encoder_phys_wb_setup_cdp(phys_enc);
+}
+static void _dpu_encoder_phys_wb_frame_done_helper(void *arg) +{ + struct dpu_encoder_phys *phys_enc = arg; + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
+ struct dpu_hw_wb *hw_wb = phys_enc->hw_wb; + unsigned long lock_flags; + u32 event = DPU_ENCODER_FRAME_EVENT_DONE;
+ DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
+ if (phys_enc->parent_ops->handle_frame_done) + phys_enc->parent_ops->handle_frame_done(phys_enc->parent, + phys_enc, event);
+ if (phys_enc->parent_ops->handle_vblank_virt) + phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent, + phys_enc);
+ spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); + spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
+ if (wb_enc->wb_conn) + drm_writeback_signal_completion(wb_enc->wb_conn, 0);
+ /* Signal any waiting atomic commit thread */ + wake_up_all(&phys_enc->pending_kickoff_wq); +}
+/**
- dpu_encoder_phys_wb_done_irq - writeback interrupt handler
- @arg: Pointer to writeback encoder
- @irq_idx: interrupt index
- */
+static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx) +{ + _dpu_encoder_phys_wb_frame_done_helper(arg); +}
+/**
- dpu_encoder_phys_wb_irq_ctrl - irq control of WB
- @phys: Pointer to physical encoder
- @enable: indicates enable or disable interrupts
- */
+static void dpu_encoder_phys_wb_irq_ctrl( + struct dpu_encoder_phys *phys, bool enable) +{
+ struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys); + int ret = 0; + int refcount;
+ refcount = atomic_read(&wb_enc->wbirq_refcount);
+ if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) { + dpu_encoder_helper_register_irq(phys, INTR_IDX_WB_DONE); + if (ret) + atomic_dec_return(&wb_enc->wbirq_refcount); + } else if (!enable && + atomic_dec_return(&wb_enc->wbirq_refcount) == 0) { + dpu_encoder_helper_unregister_irq(phys, INTR_IDX_WB_DONE); + if (ret) + atomic_inc_return(&wb_enc->wbirq_refcount); + } +}
+/**
- dpu_encoder_phys_wb_mode_set - set display mode
- @phys_enc: Pointer to physical encoder
- @mode: Pointer to requested display mode
- @adj_mode: Pointer to adjusted display mode
- */
+static void dpu_encoder_phys_wb_mode_set( + struct dpu_encoder_phys *phys_enc, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + struct dpu_encoder_irq *irq;
+ if (adj_mode) { + phys_enc->cached_mode = *adj_mode; + drm_mode_debug_printmodeline(adj_mode); + DPU_DEBUG("caching mode:\n"); + }
+ irq = &phys_enc->irq[INTR_IDX_WB_DONE]; + irq->irq_idx = phys_enc->hw_wb->caps->intr_wb_done; +}
+static void _dpu_encoder_phys_wb_handle_wbdone_timeout( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR;
+ wb_enc->wb_done_timeout_cnt++;
+ if (wb_enc->wb_done_timeout_cnt == 1) + msm_disp_snapshot_state(phys_enc->parent->dev);
+ atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0);
+ /* request a ctl reset before the next kickoff */ + phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET;
+ if (wb_enc->wb_conn) + drm_writeback_signal_completion(wb_enc->wb_conn, 0);
+ if (phys_enc->parent_ops->handle_frame_done) + phys_enc->parent_ops->handle_frame_done( + phys_enc->parent, phys_enc, frame_event); +}
+/**
- dpu_encoder_phys_wb_wait_for_commit_done - wait until request is
committed
- @phys_enc: Pointer to physical encoder
- */
+static int dpu_encoder_phys_wb_wait_for_commit_done( + struct dpu_encoder_phys *phys_enc) +{ + unsigned long ret; + struct dpu_encoder_wait_info wait_info; + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
+ wait_info.wq = &phys_enc->pending_kickoff_wq; + wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; + wait_info.timeout_ms = KICKOFF_TIMEOUT_MS;
+ ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE, + &wait_info); + if (ret == -ETIMEDOUT) + _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc); + else if (!ret) + wb_enc->wb_done_timeout_cnt = 0;
+ return ret; +}
+/**
- dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing
- @phys_enc: Pointer to physical encoder
- Returns: Zero on success
- */
+static void dpu_encoder_phys_wb_prepare_for_kickoff( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc); + struct drm_connector *drm_conn; + struct drm_connector_state *state;
+ DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
+ if (!wb_enc->wb_conn || !wb_enc->wb_job) { + DPU_ERROR("invalid wb_conn or wb_job\n"); + return; + }
+ drm_conn = wb_enc->wb_conn->base; + state = drm_conn->state;
+ if (wb_enc->wb_conn && wb_enc->wb_job) + drm_writeback_queue_job(wb_enc->wb_conn, state);
+ dpu_encoder_phys_wb_setup(phys_enc);
+ _dpu_encoder_phys_wb_update_flush(phys_enc); +}
+/**
- dpu_encoder_phys_wb_needs_single_flush - trigger flush processing
- @phys_enc: Pointer to physical encoder
- */
+static bool dpu_encoder_phys_wb_needs_single_flush(struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); + return false; +}
+/**
- dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_handle_post_kickoff( + struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
+}
+/**
- dpu_encoder_phys_wb_enable - enable writeback encoder
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0); + phys_enc->enable_state = DPU_ENC_ENABLED; +} +/**
- dpu_encoder_phys_wb_disable - disable writeback encoder
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys *phys_enc) +{ + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
+ DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
+ if (phys_enc->enable_state == DPU_ENC_DISABLED) { + DPU_ERROR("encoder is already disabled\n"); + return; + }
+ /* reset h/w before final flush */ + if (phys_enc->hw_ctl->ops.clear_pending_flush) + phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl);
+ /* + * New CTL reset sequence from 5.0 MDP onwards. + * If has_3d_merge_reset is not set, legacy reset + * sequence is executed. + * + * Legacy reset sequence has not been implemented yet. + * Any target earlier than SM8150 will need it and when + * WB support is added to those targets will need to add + * the legacy teardown sequence as well. + */ + if (phys_enc->hw_pp->merge_3d)
This is a bit.. counterintuitive. I'd prefer hw_ctl->caps->features & BIT(DPU_ACTIVE_CTL).
Your suggestion should work.
But consider it this way.
Checking caps is telling us if the chipset supports merge3d which is sufficient in this case but phys_enc->hw_pp->merge_3d is telling us whether merge_3d is also being used in this RM session.
So i just thought its a better check to cover both.
hw_pp->merge_3d is set when PP has a MERGE_3D attached in hardware, no matter if it is used in the current pipeline or not.
As I wrote, the code is counterintuitive. The comment talks about MDP 5.0, but the condition checks hw_pp->merge_3d, which might not be present for tons of other reasons (starting from somebody forgetting to list it in the hw_catalog).
And in fact there is a followup question. Can we push this check (and a legacy reset sequence) into the dpu_encoder_helper_phys_cleanup() itself? Thus the dpu_encoder_phys will just call _helper_phys_cleanup() and let the helper care about hardware details.
+ dpu_encoder_helper_phys_cleanup(phys_enc);
+ phys_enc->enable_state = DPU_ENC_DISABLED; +}
+/**
- dpu_encoder_phys_wb_get_hw_resources - get hardware resources
- @phys_enc: Pointer to physical encoder
- @hw_res: Pointer to encoder resources
- */
+static void dpu_encoder_phys_wb_get_hw_resources( + struct dpu_encoder_phys *phys_enc, + struct dpu_encoder_hw_resources *hw_res) +{ + if (!phys_enc) { + DPU_ERROR("invalid encoder\n"); + return; + }
+ hw_res->wbs[phys_enc->intf_idx - WB_0] = INTF_MODE_WB_LINE; + DPU_DEBUG("[wb:%d] intf_mode=%d\n", phys_enc->intf_idx - WB_0, + hw_res->wbs[phys_enc->intf_idx - WB_0]); +}
+/**
- dpu_encoder_phys_wb_destroy - destroy writeback encoder
- @phys_enc: Pointer to physical encoder
- */
+static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys *phys_enc) +{ + DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0);
+ if (!phys_enc) + return;
+ kfree(phys_enc); +}
+static void dpu_encoder_phys_wb_prepare_wb_job(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job) +{ + const struct msm_format *format; + struct dpu_hw_wb_cfg *wb_cfg; + int ret; + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
+ if (!job->fb) + return;
+ wb_enc->wb_job = job; + wb_enc->wb_conn = job->connector; + wb_enc->aspace = phys_enc->dpu_kms->base.aspace;
Any particular reason to cache it in wb_enc?
We can technically get this from phys_enc->dpu_kms->base.aspace so I can drop this.
+ wb_cfg = &wb_enc->wb_cfg;
+ memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg));
+ ret = msm_framebuffer_prepare(job->fb, wb_enc->aspace); + if (ret) { + DPU_ERROR("prep fb failed, %d\n", ret); + return; + }
+ format = msm_framebuffer_format(job->fb);
+ wb_cfg->dest.format = dpu_get_dpu_format_ext( + format->pixel_format, job->fb->modifier); + if (!wb_cfg->dest.format) { + /* this error should be detected during atomic_check */ + DPU_ERROR("failed to get format %x\n", format->pixel_format); + return; + }
+ ret = dpu_format_populate_layout(wb_enc->aspace, job->fb, &wb_cfg->dest); + if (ret) { + DPU_DEBUG("failed to populate layout %d\n", ret); + return; + }
+ wb_cfg->dest.width = job->fb->width; + wb_cfg->dest.height = job->fb->height; + wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes;
+ if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) && + (wb_cfg->dest.format->element[0] == C1_B_Cb)) + swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]);
+ DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n", + wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1], + wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]);
+ DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n", + wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1], + wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]); +}
+static void dpu_encoder_phys_wb_cleanup_wb_job(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job) +{ + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
+ if (!job->fb) + return;
+ msm_framebuffer_cleanup(job->fb, wb_enc->aspace); + // revisit this after everything else works
Everything works now, doesn't it?
Yeah, everything works. i forgot to get rid of this comment :) Had it in a bunch of other places too and missed one while cleaning up.
+ wb_enc->wb_job = NULL; + wb_enc->wb_conn = NULL; +}
+/**
- dpu_encoder_phys_wb_init_ops - initialize writeback operations
- @ops: Pointer to encoder operation table
- */
+static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops *ops) +{ + ops->is_master = dpu_encoder_phys_wb_is_master; + ops->mode_set = dpu_encoder_phys_wb_mode_set; + ops->enable = dpu_encoder_phys_wb_enable; + ops->disable = dpu_encoder_phys_wb_disable; + ops->destroy = dpu_encoder_phys_wb_destroy; + ops->atomic_check = dpu_encoder_phys_wb_atomic_check; + ops->get_hw_resources = dpu_encoder_phys_wb_get_hw_resources; + ops->wait_for_commit_done = dpu_encoder_phys_wb_wait_for_commit_done; + ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff; + ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff; + ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush; + ops->trigger_start = dpu_encoder_helper_trigger_start; + ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job; + ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job; + ops->irq_control = dpu_encoder_phys_wb_irq_ctrl; +}
+/**
- dpu_encoder_phys_wb_init - initialize writeback encoder
- @init: Pointer to init info structure with initialization params
- */
+struct dpu_encoder_phys *dpu_encoder_phys_wb_init( + struct dpu_enc_phys_init_params *p) +{ + struct dpu_encoder_phys *phys_enc = NULL; + struct dpu_encoder_phys_wb *wb_enc = NULL;
+ struct dpu_encoder_irq *irq; + int ret = 0; + int i;
+ DPU_DEBUG("\n");
+ if (!p || !p->parent) { + DPU_ERROR("invalid params\n"); + ret = -EINVAL; + goto fail_alloc; + }
+ wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL); + if (!wb_enc) { + DPU_ERROR("failed to allocate wb phys_enc enc\n"); + ret = -ENOMEM; + goto fail_alloc; + }
+ phys_enc = &wb_enc->base; + phys_enc->hw_mdptop = p->dpu_kms->hw_mdp; + phys_enc->intf_idx = p->intf_idx;
+ dpu_encoder_phys_wb_init_ops(&phys_enc->ops); + phys_enc->parent = p->parent; + phys_enc->parent_ops = p->parent_ops; + phys_enc->dpu_kms = p->dpu_kms; + phys_enc->split_role = p->split_role; + phys_enc->intf_mode = INTF_MODE_WB_LINE; + phys_enc->intf_idx = p->intf_idx; + phys_enc->enc_spinlock = p->enc_spinlock;
+ atomic_set(&wb_enc->wbirq_refcount, 0);
+ for (i = 0; i < INTR_IDX_MAX; i++) { + irq = &phys_enc->irq[i]; + INIT_LIST_HEAD(&irq->cb.list); + irq->irq_idx = -EINVAL; + irq->cb.arg = phys_enc; + }
+ irq = &phys_enc->irq[INTR_IDX_WB_DONE]; + irq->name = "wb_done"; + irq->intr_idx = INTR_IDX_WB_DONE; + irq->cb.func = dpu_encoder_phys_wb_done_irq;
+ atomic_set(&phys_enc->pending_kickoff_cnt, 0); + atomic_set(&phys_enc->vblank_refcount, 0); + wb_enc->wb_done_timeout_cnt = 0;
+ init_waitqueue_head(&phys_enc->pending_kickoff_wq); + phys_enc->enable_state = DPU_ENC_DISABLED;
+ DPU_DEBUG("Created dpu_encoder_phys for wb %d\n", + phys_enc->intf_idx);
+ return phys_enc;
+fail_alloc: + return ERR_PTR(ret); +}