From: Konstantin Sudakov k.sudakov@integrasources.com
The Rondo RB070D30 panel is a MIPI-DSI panel based on a Fitipower EK79007 controller and a 1024x600 panel.
Signed-off-by: Konstantin Sudakov k.sudakov@integrasources.com Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com --- drivers/gpu/drm/panel/Kconfig | 9 +- drivers/gpu/drm/panel/Makefile | 1 +- drivers/gpu/drm/panel/panel-rondo-rb070d30.c | 258 ++++++++++++++++++++- 3 files changed, 268 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-rondo-rb070d30.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 3f3537719beb..3164fa824a63 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -138,6 +138,15 @@ config DRM_PANEL_RAYDIUM_RM68200 Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel.
+config DRM_PANEL_RONDO_RB070D30 + tristate "Rondo Electronics RB070D30 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Rondo Electronics + RB070D30 1024x600 DSI panel. + config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 4396658a7996..4fe4cf1bfdb5 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o +obj-$(CONFIG_DRM_PANEL_RONDO_RB070D30) += panel-rondo-rb070d30.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o diff --git a/drivers/gpu/drm/panel/panel-rondo-rb070d30.c b/drivers/gpu/drm/panel/panel-rondo-rb070d30.c new file mode 100644 index 000000000000..4f8e63f367b1 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-rondo-rb070d30.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bridge Systems BV + * Copyright (C) 2018, Bootlin + * Copyright (C) 2017, Free Electrons + * + * This file based on panel-ilitek-ili9881c.c + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drmP.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> +#include <video/of_display_timing.h> +#include <video/videomode.h> + +struct rb070d30_panel { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + struct backlight_device *backlight; + struct regulator *supply; + + struct { + struct gpio_desc *power; + struct gpio_desc *reset; + struct gpio_desc *updn; + struct gpio_desc *shlr; + } gpios; +}; + +static inline struct rb070d30_panel *panel_to_rb070d30_panel(struct drm_panel *panel) +{ + return container_of(panel, struct rb070d30_panel, panel); +} + +static int rb070d30_panel_prepare(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + int ret; + + ret = regulator_enable(ctx->supply); + if (ret < 0) { + dev_err(&ctx->dsi->dev, "Failed to enable supply: %d\n", ret); + return ret; + } + + /* Reset */ + msleep(20); + gpiod_set_value(ctx->gpios.power, 1); + msleep(20); + gpiod_set_value(ctx->gpios.reset, 1); + msleep(20); + return 0; +} + +static int rb070d30_panel_unprepare(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + gpiod_set_value(ctx->gpios.power, 0); + gpiod_set_value(ctx->gpios.reset, 0); + regulator_disable(ctx->supply); + + return 0; +} + +static int rb070d30_panel_enable(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + int ret; + + ret = mipi_dsi_dcs_exit_sleep_mode(ctx->dsi); + if (ret) + return ret; + + ret = backlight_enable(ctx->backlight); + if (ret) + goto out; + + return 0; + +out: + mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); + return ret; +} + +static int rb070d30_panel_disable(struct drm_panel *panel) +{ + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + + backlight_disable(ctx->backlight); + return mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); +} + +/* Default timings */ +static const struct drm_display_mode default_mode = { + .clock = 51206, + .hdisplay = 1024, + .hsync_start = 1024 + 160, + .hsync_end = 1024 + 160 + 80, + .htotal = 1024 + 160 + 80 + 80, + .vdisplay = 600, + .vsync_start = 600 + 12, + .vsync_end = 600 + 12 + 10, + .vtotal = 600 + 12 + 10 + 13, + .vrefresh = 60, +}; + +static int rb070d30_panel_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct rb070d30_panel *ctx = panel_to_rb070d30_panel(panel); + struct drm_display_mode *mode; + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -EINVAL; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + panel->connector->display_info.bpc = 8; + panel->connector->display_info.width_mm = 154; + panel->connector->display_info.height_mm = 85; + drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + + return 1; +} + +static const struct drm_panel_funcs rb070d30_panel_funcs = { + .get_modes = rb070d30_panel_get_modes, + .prepare = rb070d30_panel_prepare, + .enable = rb070d30_panel_enable, + .disable = rb070d30_panel_disable, + .unprepare = rb070d30_panel_unprepare, +}; + +static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct device_node *np; + struct rb070d30_panel *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->supply = devm_regulator_get(&dsi->dev, "vcc-lcd"); + if (IS_ERR(ctx->supply)) + return PTR_ERR(ctx->supply); + + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + + drm_panel_init(&ctx->panel); + ctx->panel.dev = &dsi->dev; + ctx->panel.funcs = &rb070d30_panel_funcs; + + ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.reset)) { + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); + return PTR_ERR(ctx->gpios.reset); + } + + ctx->gpios.power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.power)) { + dev_err(&dsi->dev, "Couldn't get our power GPIO\n"); + return PTR_ERR(ctx->gpios.power); + } + + ctx->gpios.updn = devm_gpiod_get(&dsi->dev, "updn", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.updn)) { + dev_err(&dsi->dev, "Couldn't get our updn GPIO\n"); + return PTR_ERR(ctx->gpios.updn); + } + + ctx->gpios.shlr = devm_gpiod_get(&dsi->dev, "shlr", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpios.shlr)) { + dev_err(&dsi->dev, "Couldn't get our shlr GPIO\n"); + return PTR_ERR(ctx->gpios.shlr); + } + + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0); + if (np) { + ctx->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!ctx->backlight) + return -EPROBE_DEFER; + } + + ret = drm_panel_add(&ctx->panel); + if (ret < 0) + goto free_backlight; + + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->lanes = 4; + + return mipi_dsi_attach(dsi); + +free_backlight: + backlight_put(ctx->backlight); + return ret; +} + +static int rb070d30_panel_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct rb070d30_panel *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + backlight_put(ctx->backlight); + + return 0; +} + +static const struct of_device_id rb070d30_panel_of_match[] = { + { .compatible = "rondo,rb070d30" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rb070d30_panel_of_match); + +static struct mipi_dsi_driver rb070d30_panel_driver = { + .probe = rb070d30_panel_dsi_probe, + .remove = rb070d30_panel_dsi_remove, + .driver = { + .name = "panel-rondo-rb070d30", + .of_match_table = rb070d30_panel_of_match, + }, +}; +module_mipi_dsi_driver(rb070d30_panel_driver); + +MODULE_AUTHOR("Boris Brezillon boris.brezillon@bootlin.com"); +MODULE_AUTHOR("Konstantin Sudakov k.sudakov@integrasources.com"); +MODULE_DESCRIPTION("Rondo RB070D30 Panel Driver"); +MODULE_LICENSE("GPL");