Add runtime Power Management to the Exynos DSI driver so the LCD power domain could be turned off.
This slightly reduces the energy consumption when screen is completely turned off. On Trats2 board when the system was idle the energy consumption dropped by 1% (from 92.2 mA to 91.1 mA).
Before the patch: $ cat cat /sys/kernel/debug/pm_genpd/pm_genpd_summary lcd0-power-domain on /devices/11c00000.fimd suspended /devices/11c80000.dsi unsupported After applying the patch: lcd0-power-domain off /devices/11c00000.fimd suspended /devices/11c80000.dsi suspended
Signed-off-by: Krzysztof Kozlowski k.kozlowski@samsung.com --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 24741d8758e8..19ed36d2d557 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -21,6 +21,7 @@ #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/phy/phy.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/component.h>
@@ -1356,6 +1357,8 @@ static int exynos_dsi_enable(struct exynos_dsi *dsi) if (dsi->state & DSIM_STATE_ENABLED) return 0;
+ pm_runtime_get_sync(dsi->dev); + ret = exynos_dsi_poweron(dsi); if (ret < 0) return ret; @@ -1392,6 +1395,8 @@ static void exynos_dsi_disable(struct exynos_dsi *dsi) drm_panel_unprepare(dsi->panel); exynos_dsi_poweroff(dsi);
+ pm_runtime_put_sync(dsi->dev); + dsi->state &= ~DSIM_STATE_ENABLED; }
@@ -1772,6 +1777,8 @@ static int exynos_dsi_probe(struct platform_device *pdev) if (ret) goto err_del_component;
+ pm_runtime_enable(&pdev->dev); + return ret;
err_del_component: @@ -1781,6 +1788,8 @@ err_del_component:
static int exynos_dsi_remove(struct platform_device *pdev) { + pm_runtime_disable(&pdev->dev); + component_del(&pdev->dev, &exynos_dsi_component_ops); exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR);