Re: [PATCH 2/3] arm/dts/ls1021a: Add DCU dts node

On Fri, 2015-02-13 at 19:03 +0800, Jianwei Wang wrote:

Add DCU node, DCU is a display controller of Freescale named 2D-ACE.

Signed-off-by: Alison Wang b18965@freescale.com Signed-off-by: Xiubo Li lixiubo@cmss.chinamobile.com Signed-off-by: Jianwei Wang b52261@freescale.com

---

arch/arm/boot/dts/ls1021a.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c70bb27..28c37f1 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -383,6 +383,17 @@ <&platform_clk 1>; };

• dcfb: dcfb@2ce0000 {
  

• 	compatible = "fsl,ls1021a-dcfb";
  

• 	reg = <0x0 0x2ce0000 0x0 0x10000>;
  

• 	interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
  

• 	clocks = <&platform_clk 0>;
  

• 	clock-names = "dcfb";
  

• 	scfg-controller = <&scfg>;
  

• 	big-endian;
  

• 	status = "disabled";
  

• };
  

I don't see "big-endian" in the dcfb binding.

-Scott