Follow the typical practice and keep DSI0/DSI0 PHY disabled by default. They should be enabled in the board DT files. No existing boards use them at this moment.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 240293592ef9..8697d40e9b74 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1559,6 +1559,8 @@ dsi0: dsi@c994000 { phys = <&dsi0_phy>; phy-names = "dsi";
+ status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1592,6 +1594,7 @@ dsi0_phy: dsi-phy@c994400 {
clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + status = "disabled"; }; };