The length of qcom,enabled-strings as property array is enough to determine the number of strings to be enabled, without needing to set qcom,num-strings to override the default number of strings when less than the default (which is also the maximum) is provided in DT.
This also introduces an extra warning when qcom,num-strings is set, denoting that it is not necessary to set both anymore. It is usually more concise to set just qcom,num-length when a zero-based, contiguous range of strings is needed (the majority of the cases), or to only set qcom,enabled-strings when a specific set of indices is desired.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten marijn.suijten@somainline.org Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org --- drivers/video/backlight/qcom-wled.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index ab10910971e9..5306b06044b4 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -1520,6 +1520,8 @@ static int wled_configure(struct wled *wled) return -EINVAL; } } + + cfg->num_strings = string_len; }
rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val); @@ -1530,9 +1532,13 @@ static int wled_configure(struct wled *wled) return -EINVAL; }
- if (string_len > 0 && val > string_len) { - dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n"); - return -EINVAL; + if (string_len > 0) { + dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings" + " should be set\n"); + if (val > string_len) { + dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n"); + return -EINVAL; + } }
cfg->num_strings = val;