Sometimes the clock driver can not set a accurate clock_rate for vop, get the true rate of vop_dclk and set it back to adjusted_mode, since the mipi dsi driver need to use the clock to make the calculation of Blanking.
Signed-off-by: Chris Zhong zyw@rock-chips.com ---
Changes in v3: None Changes in v2: None
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 5d8ae5e..9986b311ed 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1232,6 +1232,12 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc, reset_control_deassert(vop->dclk_rst);
clk_set_rate(vop->dclk, adjusted_mode->clock * 1000); + + /* + * Sometimes the clock driver can not set a accurate clock_rate for vop, + * get the true rate of vop_dclk and set it back to adjusted_mode. + */ + adjusted_mode->clock = clk_get_rate(vop->dclk) / 1000; out: ret_clk = clk_enable(vop->dclk); if (ret_clk < 0) {