This patch series aims to support the MIPI DSI encoder found in the RZ/G2L SoC. It currently supports DSI mode only.
This unit supports MIPI Alliance Specification for Display Serial Interface (DSI) Specification. This unit provides a solution for transmitting MIPI DSI compliant digital video and packets. Normative References are below. * MIPI Alliance Specification for Display Serial Interface Version 1.3.1 * MIPI Alliance Specification for D-PHY Version 2.1
The following are key features of this unit.
* 1 channel * The number of Lane: 4-lane * Support up to Full HD (1920 × 1080), 60 fps (RGB888) * Maximum Bandwidth: 1.5 Gbps per lane * Support Output Data Format: RGB666 / RGB888
v2->v3: * Added Rb tag from Geert and Laurent for the binding patch. * Fixed the typo "Receive" -> "transmit" * Added accepible values for data-lanes * Sorted Header file in the example * Added SoC specific compaible along with generic one. * pass rzg2l_mipi_dsi pointer to {Link,Phy} register rd/wr function instead of the memory pointer * Fixed the comment in rzg2l_mipi_dsi_startup() * Removed unnecessary dbg message from rzg2l_mipi_dsi_start_video() * DRM bridge parameter initialization moved to probe * Replaced dev_dbg->dev_err in rzg2l_mipi_dsi_parse_dt() * Inserted the missing blank lane after return in probe() * Added missing MODULE_DEVICE_TABLE * Added include linux/bits.h in header file * Fixed various macros in header file. * Reorder the make file for DSI, so that it is no more dependent on RZ/G2L DU patch series. v1->v2: * Added full path for dsi-controller.yaml * Modeled DSI + D-PHY as single block and updated reg property * Fixed typo D_PHY->D-PHY * Updated description * Added interrupts and interrupt-names and updated the example * Driver rework based on dt-binding changes (DSI + D-PHY) as single block * Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write and rzg2l_mipi_dsi_link_write * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read RFC->v1: * Added a ref to dsi-controller.yaml. * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG and dropped DRM as it is implied by DRM_BRIDGE * Used devm_reset_control_get_exclusive() for reset handle * Removed bool hsclkmode from struct rzg2l_mipi_dsi * Added error check for pm, using pm_runtime_resume_and_get() instead of pm_runtime_get_sync() * Added check for unsupported formats in rzg2l_mipi_dsi_host_attach() * Avoided read-modify-write stopping hsclock * Used devm_platform_ioremap_resource for resource allocation * Removed unnecessary assert call from probe and remove. * wrap the line after the PTR_ERR() in probe() * Updated reset failure messages in probe * Fixed the typo arstc->prstc * Made hex constants to lower case. RFC: * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.... * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612....
Biju Das (2): dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings drm: rcar-du: Add RZ/G2L DSI driver
.../bindings/display/bridge/renesas,dsi.yaml | 182 +++++ drivers/gpu/drm/rcar-du/Kconfig | 8 + drivers/gpu/drm/rcar-du/Makefile | 2 + drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c | 690 ++++++++++++++++++ drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 151 ++++ 5 files changed, 1033 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h