[PATCH 57/59] drm/kmb: workaround for dma undeflow issue

30 Jun 2020

Initial issue was that display remains shifted after undeflow, this fix is
to recover the dma after underflow so display is clean. Major changes are
reduce LCD_CLK to 200Mhz and some changes in the lcd timing params
run recovery sequence at the EOF after underflow happens
do nothing in plan_update() during recovery
reenable dma at the vsync interrupt after recovery is done
Signed-off-by: Anitha Chrisanthus anitha.chrisanthus@intel.com
Reviewed-by: Bob Paauwe bob.j.paauwe@intel.com
---
 drivers/gpu/drm/kmb/kmb_crtc.c  |  27 +++----
 drivers/gpu/drm/kmb/kmb_drv.c   | 156 +++++++++++++++++++++++++++++++---------
 drivers/gpu/drm/kmb/kmb_drv.h   |  33 +++++----
 drivers/gpu/drm/kmb/kmb_plane.c |  12 +++-
 drivers/gpu/drm/kmb/kmb_plane.h |  29 ++++----
 drivers/gpu/drm/kmb/kmb_regs.h  |   7 +-
 6 files changed, 188 insertions(+), 76 deletions(-)

diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c
index c01977b..c70928c 100644
--- a/drivers/gpu/drm/kmb/kmb_crtc.c
+++ b/drivers/gpu/drm/kmb/kmb_crtc.c
@@ -115,25 +115,25 @@ static void kmb_crtc_mode_set_nofb(struct drm_crtc *crtc)
    vm.vfront_porch = 2;
 //      vm.vback_porch = m->crtc_vtotal - m->crtc_vsync_end;
    vm.vback_porch = 2;
-//      vm.vsync_len = m->crtc_vsync_end - m->crtc_vsync_start;
-	vm.vsync_len = 1;
+//	vm.vsync_len = m->crtc_vsync_end - m->crtc_vsync_start;
+	vm.vsync_len = 8;
    //vm.hfront_porch = m->crtc_hsync_start - m->crtc_hdisplay;
    vm.hfront_porch = 0;
    vm.hback_porch = 0;
    //vm.hback_porch = m->crtc_htotal - m->crtc_hsync_end;
-	vm.hsync_len = 7;
-//      vm.hsync_len = m->crtc_hsync_end - m->crtc_hsync_start;
+	vm.hsync_len = 28;
+//	vm.hsync_len = m->crtc_hsync_end - m->crtc_hsync_start;
-	vsync_start_offset = m->crtc_vsync_start - m->crtc_hsync_start;
-	vsync_end_offset = m->crtc_vsync_end - m->crtc_hsync_end;
+	vsync_start_offset =  m->crtc_vsync_start -  m->crtc_hsync_start;
+	vsync_end_offset =  m->crtc_vsync_end - m->crtc_hsync_end;
-	DRM_DEBUG
-	    ("%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d h-active=%d h-bp=%d h-fp=%d hysnc-l=%d",
-	     __func__, __LINE__, m->crtc_vdisplay, vm.vback_porch,
-	     vm.vfront_porch, vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
-	     vm.hfront_porch, vm.hsync_len);
+	DRM_DEBUG("%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d h-active=%d h-bp=%d h-fp=%d hysnc-l=%d",
+			__func__, __LINE__,
+			m->crtc_vdisplay, vm.vback_porch, vm.vfront_porch,
+			vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
+			vm.hfront_porch, vm.hsync_len);
    kmb_write_lcd(dev->dev_private, LCD_V_ACTIVEHEIGHT,
-		      m->crtc_vdisplay - 1);
+			m->crtc_vdisplay - 1);
    kmb_write_lcd(dev->dev_private, LCD_V_BACKPORCH, vm.vback_porch);
    kmb_write_lcd(dev->dev_private, LCD_V_FRONTPORCH, vm.vfront_porch);
    kmb_write_lcd(dev->dev_private, LCD_VSYNC_WIDTH, vm.vsync_len - 1);
@@ -145,7 +145,8 @@ static void kmb_crtc_mode_set_nofb(struct drm_crtc *crtc)
    /*this is hardcoded as 0 in the Myriadx code */
    kmb_write_lcd(dev->dev_private, LCD_VSYNC_START, 0);
    kmb_write_lcd(dev->dev_private, LCD_VSYNC_END, 0);
-
+	/* back ground color */
+	kmb_write_lcd(dev->dev_private, LCD_BG_COLOUR_LS, 0x4);
    if (m->flags == DRM_MODE_FLAG_INTERLACE) {
    	kmb_write_lcd(dev->dev_private,
    		      LCD_VSYNC_WIDTH_EVEN, vm.vsync_len - 1);
diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c
index 68e7b5c..bafc02a 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.c
+++ b/drivers/gpu/drm/kmb/kmb_drv.c
@@ -51,10 +51,10 @@
 #include "kmb_dsi.h"
//#define DEBUG
-
 /* IRQ handler */
 static irqreturn_t kmb_isr(int irq, void *arg);
+int under_flow = 0, flush_done = 0, layer_no = 0;
 static struct clk *clk_lcd;
 static struct clk *clk_mipi;
 static struct clk *clk_mipi_ecfg;
@@ -133,6 +133,7 @@ static void __iomem *kmb_map_mmio(struct platform_device *pdev, char *name)
    return mem;
 }
+//#define ICAM_LCD_QOS
 static int kmb_load(struct drm_device *drm, unsigned long flags)
 {
    struct kmb_drm_private *dev_p = drm->dev_private;
@@ -140,6 +141,9 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
    int irq_lcd;
    int ret = 0;
    unsigned long clk;
+#ifdef ICAM_LCD_QOS
+	int val = 0;
+#endif
/* Map MIPI MMIO registers */
    dev_p->mipi_mmio = kmb_map_mmio(pdev, "mipi_regs");
@@ -173,6 +177,13 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
    	iounmap(dev_p->mipi_mmio);
    	return -ENOMEM;
    }
+#ifdef ICAM_LCD_QOS
+	dev_p->icamlcd_mmio = ioremap_nocache(ICAM_MMIO, ICAM_MMIO_SIZE);
+	if (IS_ERR(dev_p->icamlcd_mmio)) {
+		DRM_ERROR("failed to map ICAM registers\n");
+		return -ENOMEM;
+	}
+#endif
 #define KMB_CLOCKS
 #ifdef KMB_CLOCKS
    /* Enable display clocks */
@@ -268,7 +279,7 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
    kmb_set_bitmask_msscam(dev_p, MSS_CAM_CLK_CTRL, 0x1fff);
    kmb_set_bitmask_msscam(dev_p, MSS_CAM_RSTN_CTRL, 0xffffffff);
-#endif //KMB_CLOCKS
+#endif				//KMB_CLOCKS
/* Register irqs here - section 17.3 in databook
     * lists LCD at 79 and 82 for MIPI under MSS CPU -
@@ -331,11 +342,29 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
dev_p->irq_lcd = irq_lcd;
+	/* icam tests */
+#ifdef ICAM_LCD_QOS
+	/*generator mode = 0 fixed mode=1 limiter */
+	writel(1, (dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_MODE));
+	/* b/w */
+	writel(0x60, (dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_BW));
+
+	/* set priority.p1 */
+	val = readl(dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_PRORITY);
+	val &= ~(0x700);
+	writel(val | 0x100,
+	       (dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_PRORITY));
+
+	DRM_INFO("ICAM mode = 0x%x, priority = 0x%x bandwidth=0x%x",
+		 readl(dev_p->icamlcd_mmio + 0x1080 + LCD_QOS_MODE),
+		 readl(dev_p->icamlcd_mmio + 0x1080 + LCD_QOS_PRORITY),
+		 readl(dev_p->icamlcd_mmio + 0x1080 + LCD_QOS_BW));
+#endif
    return 0;
-irq_fail:
+ irq_fail:
    drm_crtc_cleanup(&dev_p->crtc);
-setup_fail:
+ setup_fail:
    of_reserved_mem_device_release(drm->dev);
return ret;
@@ -368,13 +397,15 @@ static void kmb_setup_mode_config(struct drm_device *drm)
static irqreturn_t handle_lcd_irq(struct drm_device *dev)
 {
-	unsigned long status, val;
-	int plane_id;
+	volatile unsigned long status, val, val1;
+	int plane_id, dma0_state, dma1_state;
    struct kmb_drm_private *dev_p = dev->dev_private;
status = kmb_read_lcd(dev->dev_private, LCD_INT_STATUS);
+
    if (status & LCD_INT_EOF) {
    	/* TODO - handle EOF interrupt? */
+
    	kmb_write_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_EOF);
/* When disabling/enabling LCD layers, the change takes effect
@@ -396,6 +427,30 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
    			plane_status[plane_id].disable = false;
    		}
    	}
+		if (under_flow) {
+			/*DMA Recovery after underflow */
+			DRM_INFO("EOF:S");
+			dma0_state = (layer_no == 0) ?
+			    LCD_VIDEO0_DMA0_STATE : LCD_VIDEO1_DMA0_STATE;
+			dma1_state = (layer_no == 0) ?
+			    LCD_VIDEO0_DMA1_STATE : LCD_VIDEO1_DMA1_STATE;
+
+			do {
+				kmb_write_lcd(dev_p, LCD_FIFO_FLUSH, 1);
+				val = kmb_read_lcd(dev_p, dma0_state)
+				    & LCD_DMA_STATE_ACTIVE;
+				val1 = kmb_read_lcd(dev_p, dma1_state)
+				    & LCD_DMA_STATE_ACTIVE;
+			} while ((val || val1));
+			/*disable dma */
+			kmb_clr_bitmask_lcd(dev_p, LCD_LAYERn_DMA_CFG(layer_no),
+					    LCD_DMA_LAYER_ENABLE);
+			kmb_write_lcd(dev_p, LCD_FIFO_FLUSH, 1);
+			flush_done = 1;
+			under_flow = 0;
+			DRM_INFO("EOF:E ");
+		}
+
    }
if (status & LCD_INT_LINE_CMP) {
@@ -409,48 +464,86 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
    	val = (val & LCD_VSTATUS_VERTICAL_STATUS_MASK);
    	switch (val) {
    	case LCD_VSTATUS_COMPARE_VSYNC:
+			/* Clear vertical compare interrupt */
+			kmb_write_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_VERT_COMP);
+			if (flush_done) {
+				kmb_set_bitmask_lcd(dev_p,
+						    LCD_LAYERn_DMA_CFG
+						    (layer_no),
+						    LCD_DMA_LAYER_ENABLE);
+				flush_done = 0;
+			}
+			drm_handle_vblank(dev, 0);
+			break;
    	case LCD_VSTATUS_COMPARE_BACKPORCH:
    	case LCD_VSTATUS_COMPARE_ACTIVE:
    	case LCD_VSTATUS_COMPARE_FRONT_PORCH:
-			/* clear vertical compare interrupt */
-			kmb_write_lcd(dev->dev_private, LCD_INT_CLEAR,
-				      LCD_INT_VERT_COMP);
-			drm_handle_vblank(dev, 0);
+			kmb_write_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_VERT_COMP);
    		break;
    	}
    }
-
    if (status & LCD_INT_DMA_ERR) {
-		val = (status & LCD_INT_DMA_ERR);
+		val =
+		    (status & LCD_INT_DMA_ERR &
+		     kmb_read_lcd(dev_p, LCD_INT_ENABLE));
    	/* LAYER0 - VL0 */
-		if (val & LAYER0_DMA_FIFO_UNDEFLOW)
-			DRM_INFO("LAYER0:VL0 DMA UNDERFLOW val = 0x%lx", val);
+		if (val & (LAYER0_DMA_FIFO_UNDERFLOW |
+			   LAYER0_DMA_CB_FIFO_UNDERFLOW |
+			   LAYER0_DMA_CR_FIFO_UNDERFLOW)) {
+			under_flow++;
+			DRM_INFO
+			    ("!LAYER0:VL0 DMA UNDERFLOW val = 0x%lx,under_flow=%d",
+			     val, under_flow);
+			/*disable underflow inerrupt */
+			kmb_clr_bitmask_lcd(dev_p, LCD_INT_ENABLE,
+					    LAYER0_DMA_FIFO_UNDERFLOW |
+					    LAYER0_DMA_CB_FIFO_UNDERFLOW |
+					    LAYER0_DMA_CR_FIFO_UNDERFLOW);
+			kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR,
+					    LAYER0_DMA_CB_FIFO_UNDERFLOW |
+					    LAYER0_DMA_FIFO_UNDERFLOW |
+					    LAYER0_DMA_CR_FIFO_UNDERFLOW);
+			/*disable auto restart mode */
+			kmb_clr_bitmask_lcd(dev_p, LCD_LAYERn_DMA_CFG(0),
+				    LCD_DMA_LAYER_CONT_PING_PONG_UPDATE);
+			layer_no = 0;
+		}
+
    	if (val & LAYER0_DMA_FIFO_OVERFLOW)
    		DRM_INFO("LAYER0:VL0 DMA OVERFLOW val = 0x%lx", val);
    	if (val & LAYER0_DMA_CB_FIFO_OVERFLOW)
    		DRM_INFO("LAYER0:VL0 DMA CB OVERFLOW val = 0x%lx", val);
-		if (val & LAYER0_DMA_CB_FIFO_UNDERFLOW)
-			DRM_INFO("LAYER0:VL0 DMA CB UNDERFLOW val = 0x%lx",
-				 val);
-		if (val & LAYER0_DMA_CR_FIFO_UNDERFLOW)
-			DRM_INFO("LAYER0:VL0 DMA CR UNDERFLOW val = 0x%lx",
-				 val);
    	if (val & LAYER0_DMA_CR_FIFO_OVERFLOW)
    		DRM_INFO("LAYER0:VL0 DMA CR OVERFLOW val = 0x%lx", val);
/* LAYER1 - VL1 */
-		if (val & LAYER1_DMA_FIFO_UNDERFLOW)
-			DRM_INFO("LAYER1:VL1 DMA UNDERFLOW val = 0x%lx", val);
+		if (val & (LAYER1_DMA_FIFO_UNDERFLOW |
+			   LAYER1_DMA_CB_FIFO_UNDERFLOW |
+			   LAYER1_DMA_CR_FIFO_UNDERFLOW)) {
+			under_flow++;
+			DRM_INFO
+			    ("!LAYER1:VL1 DMA UNDERFLOW val = 0x%lx, under_flow=%d",
+			     val, under_flow);
+			/*disable underflow inerrupt */
+			kmb_clr_bitmask_lcd(dev_p, LCD_INT_ENABLE,
+					    LAYER1_DMA_FIFO_UNDERFLOW |
+					    LAYER1_DMA_CB_FIFO_UNDERFLOW |
+					    LAYER1_DMA_CR_FIFO_UNDERFLOW);
+			kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR,
+					    LAYER1_DMA_CB_FIFO_UNDERFLOW |
+					    LAYER1_DMA_FIFO_UNDERFLOW |
+					    LAYER1_DMA_CR_FIFO_UNDERFLOW);
+			/*disable auto restart mode */
+			kmb_clr_bitmask_lcd(dev_p, LCD_LAYERn_DMA_CFG(1),
+				    LCD_DMA_LAYER_CONT_PING_PONG_UPDATE);
+			layer_no = 1;
+		}
+
+		/* LAYER1 - VL1 */
    	if (val & LAYER1_DMA_FIFO_OVERFLOW)
    		DRM_INFO("LAYER1:VL1 DMA OVERFLOW val = 0x%lx", val);
    	if (val & LAYER1_DMA_CB_FIFO_OVERFLOW)
    		DRM_INFO("LAYER1:VL1 DMA CB OVERFLOW val = 0x%lx", val);
-		if (val & LAYER1_DMA_CB_FIFO_UNDERFLOW)
-			DRM_INFO("LAYER1:VL1 DMA CB UNDERFLOW val = 0x%lx",
-				 val);
-		if (val & LAYER1_DMA_CR_FIFO_UNDERFLOW)
-			DRM_INFO("LAYER1:VL1 DMA CR UNDERFLOW val = 0x%lx",
-				 val);
    	if (val & LAYER1_DMA_CR_FIFO_OVERFLOW)
    		DRM_INFO("LAYER1:VL1 DMA CR OVERFLOW val = 0x%lx", val);
@@ -465,7 +558,6 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
    		DRM_INFO("LAYER3:GL1 DMA UNDERFLOW val = 0x%lx", val);
    	if (val & LAYER3_DMA_FIFO_UNDERFLOW)
    		DRM_INFO("LAYER3:GL1 DMA OVERFLOW val = 0x%lx", val);
-
    }
if (status & LCD_INT_LAYER) {
@@ -647,11 +739,11 @@ static int kmb_probe(struct platform_device *pdev)
 #endif
    return 0;
-err_register:
+ err_register:
    drm_kms_helper_poll_fini(drm);
-err_vblank:
+ err_vblank:
    pm_runtime_disable(drm->dev);
-err_free:
+ err_free:
    drm_mode_config_cleanup(drm);
    dev_set_drvdata(dev, NULL);
    drm_dev_put(drm);
diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h
index eef2d8b..a066aba 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.h
+++ b/drivers/gpu/drm/kmb/kmb_drv.h
@@ -34,28 +34,31 @@
 #define KMB_MAX_HEIGHT			1080 /*max height in pixels */
 #define KMB_MIN_WIDTH                   1920 /*max width in pixels */
 #define KMB_MIN_HEIGHT                  1080 /*max height in pixels */
-#define KMB_LCD_DEFAULT_CLK		250000000
+#define KMB_LCD_DEFAULT_CLK		200000000
 #define KMB_MIPI_DEFAULT_CLK		24000000
 #define KMB_MIPI_DEFAULT_CFG_CLK	24000000
 #define KMB_SYS_CLK_MHZ			500
#define crtc_to_kmb_priv(x)	container_of(x, struct kmb_drm_private, crtc)
-
+#define ICAM_MMIO		0x3b100000
+#define ICAM_LCD_OFFSET		0x1080
+#define ICAM_MMIO_SIZE		0x2000
 struct kmb_drm_private {
-	struct drm_device drm;
-	void __iomem *lcd_mmio;
-	void __iomem *mipi_mmio;
-	void __iomem *msscam_mmio;
-	unsigned char n_layers;
-	struct clk *clk;
-	struct drm_crtc crtc;
-	struct kmb_plane *plane;
-	struct drm_atomic_state *state;
-	spinlock_t irq_lock;
-	int irq_lcd;
-	int irq_mipi;
-	dma_addr_t fb_addr;
+	struct drm_device		drm;
+	void __iomem			*lcd_mmio;
+	void __iomem			*mipi_mmio;
+	void __iomem			*msscam_mmio;
+	void __iomem                    *icamlcd_mmio;
+	unsigned char			n_layers;
+	struct clk			*clk;
+	struct drm_crtc			crtc;
+	struct kmb_plane		*plane;
+	struct drm_atomic_state		*state;
+	spinlock_t			irq_lock;
+	int				irq_lcd;
+	int				irq_mipi;
+	dma_addr_t			fb_addr;
 };
static inline struct kmb_drm_private *to_kmb(const struct drm_device *dev)
diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index 5e040f7..e278347 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -42,7 +42,6 @@
 #include "kmb_drv.h"
struct layer_status plane_status[KMB_MAX_PLANES];
-
 const uint32_t layer_irqs[] = {
    LCD_INT_VL0,
    LCD_INT_VL1,
@@ -267,13 +266,17 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
    fb = plane->state->fb;
    if (!fb)
    	return;
-
    num_planes = fb->format->num_planes;
    kmb_plane = to_kmb_plane(plane);
    plane_id = kmb_plane->id;
dev_p = plane->dev->dev_private;
+	if (under_flow || flush_done) {
+		DRM_DEBUG("plane_update:underflow!!!! returning");
+		return;
+	}
+
    src_w = (plane->state->src_w >> 16);
    src_h = plane->state->src_h >> 16;
    crtc_x = plane->state->crtc_x;
@@ -393,6 +396,11 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
    kmb_write_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg);
    DRM_DEBUG("dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg,
    	  kmb_read_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id)));
+
+	kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_EOF |
+			LCD_INT_DMA_ERR);
+	kmb_set_bitmask_lcd(dev_p, LCD_INT_ENABLE, LCD_INT_EOF |
+			LCD_INT_DMA_ERR);
 #endif
 }
diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h
index af0d091..d09dfd6 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.h
+++ b/drivers/gpu/drm/kmb/kmb_plane.h
@@ -28,19 +28,22 @@
#include "kmb_drv.h"
-#define LCD_INT_VL0_ERR (LAYER0_DMA_FIFO_UNDEFLOW | \
-			LAYER0_DMA_FIFO_OVERFLOW | \
-			LAYER0_DMA_CB_FIFO_OVERFLOW | \
-			LAYER0_DMA_CB_FIFO_UNDERFLOW | \
-			LAYER0_DMA_CR_FIFO_OVERFLOW | \
-			LAYER0_DMA_CR_FIFO_UNDERFLOW)
-
-#define LCD_INT_VL1_ERR (LAYER1_DMA_FIFO_UNDERFLOW | \
-			LAYER1_DMA_FIFO_OVERFLOW | \
-			LAYER1_DMA_CB_FIFO_OVERFLOW | \
-			LAYER1_DMA_CB_FIFO_UNDERFLOW | \
-			LAYER1_DMA_CR_FIFO_OVERFLOW | \
-			LAYER1_DMA_CR_FIFO_UNDERFLOW)
+extern int under_flow;
+extern int flush_done;
+
+#define LCD_INT_VL0_ERR ((LAYER0_DMA_FIFO_UNDERFLOW) | \
+			(LAYER0_DMA_FIFO_OVERFLOW) | \
+			(LAYER0_DMA_CB_FIFO_OVERFLOW) | \
+			(LAYER0_DMA_CB_FIFO_UNDERFLOW) | \
+			(LAYER0_DMA_CR_FIFO_OVERFLOW) | \
+			(LAYER0_DMA_CR_FIFO_UNDERFLOW))
+
+#define LCD_INT_VL1_ERR ((LAYER1_DMA_FIFO_UNDERFLOW) | \
+			(LAYER1_DMA_FIFO_OVERFLOW) | \
+			(LAYER1_DMA_CB_FIFO_OVERFLOW) | \
+			(LAYER1_DMA_CB_FIFO_UNDERFLOW) | \
+			(LAYER1_DMA_CR_FIFO_OVERFLOW) | \
+			(LAYER1_DMA_CR_FIFO_UNDERFLOW))
#define LCD_INT_GL0_ERR (LAYER2_DMA_FIFO_OVERFLOW | LAYER2_DMA_FIFO_UNDERFLOW)
 #define LCD_INT_GL1_ERR (LAYER3_DMA_FIFO_OVERFLOW | LAYER3_DMA_FIFO_UNDERFLOW)
diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h
index f904a5c..2c86d2a 100644
--- a/drivers/gpu/drm/kmb/kmb_regs.h
+++ b/drivers/gpu/drm/kmb/kmb_regs.h
@@ -86,7 +86,7 @@
 #define LAYER0_DMA_DONE				  (1<<3)
 #define LAYER0_DMA_IDLE				  (1<<4)
 #define LAYER0_DMA_FIFO_OVERFLOW		  (1<<5)
-#define LAYER0_DMA_FIFO_UNDEFLOW		  (1<<6)
+#define LAYER0_DMA_FIFO_UNDERFLOW		  (1<<6)
 #define LAYER0_DMA_CB_FIFO_OVERFLOW		  (1<<7)
 #define LAYER0_DMA_CB_FIFO_UNDERFLOW		  (1<<8)
 #define LAYER0_DMA_CR_FIFO_OVERFLOW		  (1<<9)
@@ -402,6 +402,7 @@
 #define LCD_PWM2_HIGH_LOW			(0x4 * 0x81a)
 #define LCD_VIDEO0_DMA0_BYTES			(0x4 * 0xb00)
 #define LCD_VIDEO0_DMA0_STATE			(0x4 * 0xb01)
+#define LCD_DMA_STATE_ACTIVE			  (1 << 3)
 #define LCD_VIDEO0_DMA1_BYTES			(0x4 * 0xb02)
 #define LCD_VIDEO0_DMA1_STATE			(0x4 * 0xb03)
 #define LCD_VIDEO0_DMA2_BYTES			(0x4 * 0xb04)
@@ -750,4 +751,8 @@
 #define MSSCPU_CPR_CLK_EN			(0x0)
 #define MSSCPU_CPR_RST_EN			(0x10)
 #define BIT_MASK_16				(0xffff)
+/*icam lcd qos */
+#define LCD_QOS_PRORITY				(0x8)
+#define LCD_QOS_MODE				(0xC)
+#define LCD_QOS_BW				(0x10)
 #endif /* __KMB_REGS_H__ */
-- 
2.7.4


    

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

[PATCH 57/59] drm/kmb: workaround for dma undeflow issue