From: Thierry Reding treding@nvidia.com
This helper chooses an appropriate configuration, according to the bitrate requirements of the video mode and the capabilities of the DisplayPort sink.
Signed-off-by: Thierry Reding treding@nvidia.com --- drivers/gpu/drm/drm_dp_helper.c | 55 +++++++++++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 5 ++++ 2 files changed, 60 insertions(+)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index da519acfeba7..95825155dc89 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -512,6 +512,61 @@ int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link) } EXPORT_SYMBOL(drm_dp_link_configure);
+/** + * drm_dp_link_choose() - choose the lowest possible configuration for a mode + * @link: DRM DP link object + * @mode: DRM display mode + * @info: DRM display information + * + * According to the eDP specification, a source should select a configuration + * with the lowest number of lanes and the lowest possible link rate that can + * match the bitrate requirements of a video mode. However it must ensure not + * to exceed the capabilities of the sink. + * + * Returns: 0 on success or a negative error code on failure. + */ +int drm_dp_link_choose(struct drm_dp_link *link, + const struct drm_display_mode *mode, + const struct drm_display_info *info) +{ + /* available link symbol clock rates */ + static const unsigned int rates[3] = { 162000, 270000, 540000 }; + /* available number of lanes */ + static const unsigned int lanes[3] = { 1, 2, 4 }; + unsigned long requirement, capacity; + unsigned int rate = link->max_rate; + unsigned int i, j; + + /* bandwidth requirement */ + requirement = mode->clock * info->bpc * 3; + + for (i = 0; i < ARRAY_SIZE(lanes) && lanes[i] <= link->max_lanes; i++) { + for (j = 0; j < ARRAY_SIZE(rates) && rates[j] <= rate; j++) { + /* + * Capacity for this combination of lanes and rate, + * factoring in the ANSI 8B/10B encoding. + * + * Link rates in the DRM DP helpers are really link + * symbol frequencies, so a tenth of the actual rate + * of the link. + */ + capacity = lanes[i] * (rates[j] * 10) * 8 / 10; + + if (capacity >= requirement) { + DRM_DEBUG_KMS("using %u lanes at %u kHz (%lu/%lu kbps)\n", + lanes[i], rates[j], requirement, + capacity); + link->lanes = lanes[i]; + link->rate = rates[j]; + return 0; + } + } + } + + return -ERANGE; +} +EXPORT_SYMBOL(drm_dp_link_choose); + /* * I2C-over-AUX implementation */ diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 20ae0e413b64..f3eacf62add8 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -27,6 +27,8 @@ #include <linux/i2c.h> #include <linux/delay.h>
+#include <drm/drm_crtc.h> + /* * Unless otherwise noted, all values are from the DP 1.1a spec. Note that * DP and DPCD versions are independent. Differences from 1.0 are not noted, @@ -832,6 +834,9 @@ int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link); int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link); int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link); int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link); +int drm_dp_link_choose(struct drm_dp_link *link, + const struct drm_display_mode *mode, + const struct drm_display_info *info);
int drm_dp_aux_register(struct drm_dp_aux *aux); void drm_dp_aux_unregister(struct drm_dp_aux *aux);