Convert generic PWM bindings to DT schema format using json-schema. The consumer bindings are split to separate file.
Signed-off-by: Krzysztof Kozlowski krzk@kernel.org
---
Changes since v1: 1. Indent example with four spaces (more readable), 2. Change pattern for pwm nodes, 3. Remove $ref from #cells. --- .../devicetree/bindings/clock/pwm-clock.txt | 2 +- .../bindings/display/bridge/ti,sn65dsi86.txt | 2 +- .../devicetree/bindings/display/ssd1307fb.txt | 2 +- .../bindings/leds/backlight/pwm-backlight.txt | 2 +- .../devicetree/bindings/leds/leds-pwm.txt | 2 +- .../devicetree/bindings/mfd/max77693.txt | 2 +- .../bindings/pwm/atmel-hlcdc-pwm.txt | 2 +- .../devicetree/bindings/pwm/atmel-pwm.txt | 2 +- .../devicetree/bindings/pwm/atmel-tcb-pwm.txt | 2 +- .../bindings/pwm/brcm,bcm7038-pwm.txt | 2 +- .../bindings/pwm/brcm,iproc-pwm.txt | 2 +- .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 2 +- .../devicetree/bindings/pwm/img-pwm.txt | 2 +- .../devicetree/bindings/pwm/imx-pwm.txt | 2 +- .../devicetree/bindings/pwm/imx-tpm-pwm.txt | 2 +- .../bindings/pwm/lpc1850-sct-pwm.txt | 2 +- .../devicetree/bindings/pwm/mxs-pwm.txt | 2 +- .../bindings/pwm/nvidia,tegra20-pwm.txt | 2 +- .../bindings/pwm/nxp,pca9685-pwm.txt | 2 +- .../devicetree/bindings/pwm/pwm-bcm2835.txt | 2 +- .../devicetree/bindings/pwm/pwm-berlin.txt | 2 +- .../bindings/pwm/pwm-consumers.yaml | 76 +++++++++++++++++++ .../devicetree/bindings/pwm/pwm-fsl-ftm.txt | 2 +- .../devicetree/bindings/pwm/pwm-hibvt.txt | 2 +- .../devicetree/bindings/pwm/pwm-lp3943.txt | 2 +- .../devicetree/bindings/pwm/pwm-mediatek.txt | 2 +- .../devicetree/bindings/pwm/pwm-meson.txt | 2 +- .../devicetree/bindings/pwm/pwm-mtk-disp.txt | 2 +- .../bindings/pwm/pwm-omap-dmtimer.txt | 2 +- .../devicetree/bindings/pwm/pwm-rockchip.txt | 2 +- .../devicetree/bindings/pwm/pwm-sifive.txt | 2 +- .../devicetree/bindings/pwm/pwm-stm32-lp.txt | 2 +- .../devicetree/bindings/pwm/pwm-stm32.txt | 2 +- .../devicetree/bindings/pwm/pwm-tiecap.txt | 2 +- .../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 2 +- .../devicetree/bindings/pwm/pwm-zx.txt | 2 +- Documentation/devicetree/bindings/pwm/pwm.txt | 69 ----------------- .../devicetree/bindings/pwm/pwm.yaml | 29 +++++++ .../bindings/pwm/renesas,pwm-rcar.txt | 2 +- .../bindings/pwm/renesas,tpu-pwm.txt | 4 +- .../devicetree/bindings/pwm/spear-pwm.txt | 2 +- .../devicetree/bindings/pwm/st,stmpe-pwm.txt | 2 +- .../devicetree/bindings/pwm/ti,twl-pwm.txt | 2 +- .../devicetree/bindings/pwm/ti,twl-pwmled.txt | 2 +- .../devicetree/bindings/pwm/vt8500-pwm.txt | 2 +- .../bindings/regulator/pwm-regulator.txt | 2 +- .../devicetree/bindings/timer/ingenic,tcu.txt | 2 +- 47 files changed, 150 insertions(+), 114 deletions(-) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-consumers.yaml delete mode 100644 Documentation/devicetree/bindings/pwm/pwm.txt create mode 100644 Documentation/devicetree/bindings/pwm/pwm.yaml
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt index 83db876b3b90..8a791b6d76a9 100644 --- a/Documentation/devicetree/bindings/clock/pwm-clock.txt +++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt @@ -3,7 +3,7 @@ Binding for an external clock signal driven by a PWM pin. This binding uses the common clock binding[1] and the common PWM binding[2].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/pwm/pwm.txt +[2] Documentation/devicetree/bindings/pwm/pwm-consumers.yaml
Required properties: - compatible : shall be "pwm-clock". diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt index 0a3fbb53a16e..8ec4a7f2623a 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt @@ -21,7 +21,7 @@ Optional properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify flags. See ../../gpio/gpio.txt for more information. -- #pwm-cells : Should be one. See ../../pwm/pwm.txt for description of +- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of the cell formats.
- clock-names: should be "refclk" diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt index 27333b9551b3..da9b28153a3c 100644 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -37,7 +37,7 @@ Optional properties: - solomon,area-color-enable: Display uses color mode - solomon,low-power. Display runs in low power mode
-[0]: Documentation/devicetree/bindings/pwm/pwm.txt +[0]: Documentation/devicetree/bindings/pwm/pwm-consumers.yaml
Examples: ssd1307: oled@3c { diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt index 64fa2fbd98c9..8dbbadd3af96 100644 --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt @@ -28,7 +28,7 @@ Optional properties: having to list out every possible value in the brightness-level array.
-[0]: Documentation/devicetree/bindings/pwm/pwm.txt +[0]: Documentation/devicetree/bindings/pwm/pwm-consumers.yaml [1]: Documentation/devicetree/bindings/gpio/gpio.txt
Example: diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt index 6c6583c35f2f..aeaa250668d5 100644 --- a/Documentation/devicetree/bindings/leds/leds-pwm.txt +++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt @@ -11,7 +11,7 @@ LED sub-node properties: specify the period time to be used: <&phandle id period_ns>; - pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device For the pwms and pwm-names property please refer to: - Documentation/devicetree/bindings/pwm/pwm.txt + Documentation/devicetree/bindings/pwm/pwm-consumers.yaml - max-brightness : Maximum brightness possible for the LED - active-low : (optional) For PWMs where the LED is wired to supply rather than ground. diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index a3c60a7a3be1..1e6318695eb2 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -38,7 +38,7 @@ Optional properties: PWM properties should be named "pwms". And number of cell is different for each pwm device. To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt + [*] refer Documentation/devicetree/bindings/pwm/pwm-consumers.yaml
- charger : Node configuring the charger driver. If present, required properties: diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt index cfda0d57d302..afa501bf7f94 100644 --- a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt @@ -10,7 +10,7 @@ Required properties: - pinctrl-0: should contain the pinctrl states described by pinctrl default. - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells - bindings defined in pwm.txt in this directory. + bindings defined in pwm.yaml in this directory.
Example:
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt index 591ecdd39c7b..fbb5325be1f0 100644 --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt @@ -7,7 +7,7 @@ Required properties: - "atmel,sama5d2-pwm" - "microchip,sam9x60-pwm" - reg: physical base address and length of the controller's registers - - #pwm-cells: Should be 3. See pwm.txt in this directory for a + - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt index 8031148bcf85..985fcc65f8c4 100644 --- a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt @@ -2,7 +2,7 @@ Atmel TCB PWM controller
Required properties: - compatible: should be "atmel,tcb-pwm" -- #pwm-cells: should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. - tc-block: The Timer Counter block to use as a PWM chip. diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt index d9254a6da5ed..0e662d7f6bd1 100644 --- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt @@ -4,7 +4,7 @@ Required properties:
- compatible: must be "brcm,bcm7038-pwm" - reg: physical base address and length for this controller -- #pwm-cells: should be 2. See pwm.txt in this directory for a description +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format - clocks: a phandle to the reference clock for this block which is fed through its internal variable clock frequency generator diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt index 21f75bbd6dae..655f6cd4ef46 100644 --- a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt @@ -6,7 +6,7 @@ Required Properties : - compatible: must be "brcm,iproc-pwm" - reg: physical base address and length of the controller's registers - clocks: phandle + clock specifier pair for the external clock -- #pwm-cells: Should be 3. See pwm.txt in this directory for a +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Refer to clocks/clock-bindings.txt for generic clock consumer properties. diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt index 8eae9fe7841c..c42eecfc81ed 100644 --- a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt @@ -6,7 +6,7 @@ Required Properties : - compatible: should contain "brcm,kona-pwm" - reg: physical base address and length of the controller's registers - clocks: phandle + clock specifier pair for the external clock -- #pwm-cells: Should be 3. See pwm.txt in this directory for a +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Refer to clocks/clock-bindings.txt for generic clock consumer properties. diff --git a/Documentation/devicetree/bindings/pwm/img-pwm.txt b/Documentation/devicetree/bindings/pwm/img-pwm.txt index fade5f26fcac..9db6de97317d 100644 --- a/Documentation/devicetree/bindings/pwm/img-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/img-pwm.txt @@ -8,7 +8,7 @@ Required properties: - clock-names: Must include the following entries. - pwm: PWM operating clock. - sys: PWM system interface clock. - - #pwm-cells: Should be 2. See pwm.txt in this directory for the + - #pwm-cells: Should be 2. See pwm.yaml in this directory for the description of the cells format. - img,cr-periph: Must contain a phandle to the peripheral control syscon node which contains PWM control registers. diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt index c61bdf8cd41b..22f1c3d8b773 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -6,7 +6,7 @@ Required properties: - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1 - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27 - reg: physical base address and length of the controller's registers -- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.txt +- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml in this directory for a description of the cells format. - clocks : Clock specifiers for both ipg and per clocks. - clock-names : Clock names should include both "ipg" and "per" diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt index 3ba958d764ff..5bf20950a24e 100644 --- a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt @@ -3,7 +3,7 @@ Freescale i.MX TPM PWM controller Required properties: - compatible : Should be "fsl,imx7ulp-pwm". - reg: Physical base address and length of the controller's registers. -- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format. - clocks : The clock provided by the SoC to drive the PWM. - interrupts: The interrupt for the PWM controller.
diff --git a/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt index 36e49d4325cd..43d9f4f08a2e 100644 --- a/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt @@ -7,7 +7,7 @@ Required properties: See ../clock/clock-bindings.txt for details. - clock-names: Must include the following entries. - pwm: PWM operating clock. - - #pwm-cells: Should be 3. See pwm.txt in this directory for the description + - #pwm-cells: Should be 3. See pwm.yaml in this directory for the description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index 96cdde5f6208..1b06f86a7091 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -3,7 +3,7 @@ Freescale MXS PWM controller Required properties: - compatible: should be "fsl,imx23-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format. - fsl,pwm-number: the number of PWM devices
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index c57e11b8d937..0a69eadf44ce 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -10,7 +10,7 @@ Required properties: - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210 - "nvidia,tegra186-pwm": for Tegra186 - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format. - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. diff --git a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt index f84ec9d291ea..f21b55c95738 100644 --- a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt @@ -3,7 +3,7 @@ NXP PCA9685 16-channel 12-bit PWM LED controller
Required properties: - compatible: "nxp,pca9685-pwm" - - #pwm-cells: Should be 2. See pwm.txt in this directory for a description of + - #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of the cells format. The index 16 is the ALLCALL channel, that sets all PWM channels at the same time. diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt index 8cf87d1bfca5..f5753b3f79df 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt @@ -6,7 +6,7 @@ Required properties: - clocks: This clock defines the base clock frequency of the PWM hardware system, the period and the duty_cycle of the PWM signal is a multiple of the base period. -- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Examples: diff --git a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt index 82cbe16fcbbc..f01e993a498a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt @@ -4,7 +4,7 @@ Required properties: - compatible: should be "marvell,berlin-pwm" - reg: physical base address and length of the controller's registers - clocks: phandle to the input clock -- #pwm-cells: should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/pwm-consumers.yaml b/Documentation/devicetree/bindings/pwm/pwm-consumers.yaml new file mode 100644 index 000000000000..39c844fe6338 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-consumers.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-consumers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Specifying PWM information for devices + +maintainers: + - Thierry Reding thierry.reding@gmail.com + +description: | + PWM properties should be named "pwms". The exact meaning of each pwms + property must be documented in the device tree binding for each device. + An optional property "pwm-names" may contain a list of strings to label + each of the PWM devices listed in the "pwms" property. If no "pwm-names" + property is given, the name of the user node will be used as fallback. + + Drivers for devices that use more than a single PWM device can use the + "pwm-names" property to map the name of the PWM device requested by the + pwm_get() call to an index into the list given by the "pwms" property. + +properties: + pwms: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Phandle to PWM controller node and pwm-specifier (controller specific). + pwm-specifier typically encodes the chip-relative PWM number and the PWM + period in nanoseconds. + Optionally, the pwm-specifier can encode a number of flags (defined in + <dt-bindings/pwm/pwm.h>) in a third cell: + - PWM_POLARITY_INVERTED: invert the PWM signal polarity + + pwm-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + A list of strings to label each of the PWM devices listed in the "pwms" + property. If no "pwm-names" property is given, the name of the user node + will be used as fallback. + +required: + - pwms + +dependencies: + pwm-names: [ pwms ] + +examples: + - | + // The following example could be used to describe a PWM-based + // backlight device: + + pwm: pwm { + #pwm-cells = <2>; + }; + + bl: backlight { + pwms = <&pwm 0 5000000>; + pwm-names = "backlight"; + }; + + // Note that in the example above, specifying the "pwm-names" is redundant + // because the name "backlight" would be used as fallback anyway. + + - | + // Example with optional PWM specifier for inverse polarity + + #include <dt-bindings/pwm/pwm.h> + + pwm2: pwm { + #pwm-cells = <3>; + }; + + backlight { + pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>; + pwm-names = "backlight"; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt index 576ad002bc83..36532cd5ab25 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt @@ -21,7 +21,7 @@ Required properties: - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610 - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM - reg: Physical base address and length of the controller's registers -- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format. - clock-names: Should include the following module clock source entries: "ftm_sys" (module clock, also can be used as counter clock), diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt index daedfef09bb6..54dbc2a0e648 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt @@ -10,7 +10,7 @@ Required properties: - reg: physical base address and length of the controller's registers. - clocks: phandle and clock specifier of the PWM reference clock. - resets: phandle and reset specifier for the PWM controller reset. -- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt index 7bd9d3b12ce1..f214305a8f5e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt @@ -2,7 +2,7 @@ TI/National Semiconductor LP3943 PWM controller
Required properties: - compatible: "ti,lp3943-pwm" - - #pwm-cells: Should be 2. See pwm.txt in this directory for a + - #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of the cells format. Note that this hardware limits the period length to the range 6250~1600000. diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt index 991728cb46cb..8caf01d0dd5e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt @@ -7,7 +7,7 @@ Required properties: - "mediatek,mt7623-pwm": found on mt7623 SoC. - "mediatek,mt7628-pwm": found on mt7628 SoC. - reg: physical base address and length of the controller's registers. - - #pwm-cells: must be 2. See pwm.txt in this directory for a description of + - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of the cell format. - clocks: phandle and clock specifier of the PWM reference clock. - clock-names: must contain the following, except for MT7628 which diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 891632354065..bd02b0a1496f 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -10,7 +10,7 @@ Required properties: or "amlogic,meson-g12a-ee-pwm" or "amlogic,meson-g12a-ao-pwm-ab" or "amlogic,meson-g12a-ao-pwm-cd" -- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Optional properties: diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt index 6f8af2bcc7b7..0521957c253f 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt @@ -6,7 +6,7 @@ Required properties: - "mediatek,mt6595-disp-pwm": found on mt6595 SoC. - "mediatek,mt8173-disp-pwm": found on mt8173 SoC. - reg: physical base address and length of the controller's registers. - - #pwm-cells: must be 2. See pwm.txt in this directory for a description of + - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of the cell format. - clocks: phandle and clock specifier of the PWM reference clock. - clock-names: must contain the following: diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt index 5ccfcc82da08..d722ae3be363 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Shall contain "ti,omap-dmtimer-pwm". - ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer.txt for info about these timers. -- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Optional properties: diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt index 2c5e52a5bede..f70956dea77b 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt @@ -14,7 +14,7 @@ Required properties: - For newer hardware (rk3328 and future socs): specified by name - "pwm": This is used to derive the functional clock. - "pclk": This is the APB bus clock. - - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory + - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.yaml in this directory for a description of the cell format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt index 36447e3c9378..3d1dd7b06efc 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt @@ -17,7 +17,7 @@ Required properties: Please refer to sifive-blocks-ip-versioning.txt for details. - reg: physical base address and length of the controller's registers - clocks: Should contain a clock identifier for the PWM's parent clock. -- #pwm-cells: Should be 3. See pwm.txt in this directory +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cell format. - interrupts: one interrupt per PWM channel
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt index 6521bc44a74e..4cecb8e456b6 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt @@ -8,7 +8,7 @@ See ../mfd/stm32-lptimer.txt for details about the parent node. Required parameters: - compatible: Must be "st,stm32-pwm-lp". - #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells - bindings defined in pwm.txt. + bindings defined in pwm.yaml.
Optional properties: - pinctrl-names: Set to "default". An additional "sleep" state can be diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt index a8690bfa5e1f..f390a5ba3d3a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -9,7 +9,7 @@ Required parameters: - pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt - #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells - bindings defined in pwm.txt. + bindings defined in pwm.yaml.
Optional parameters: - st,breakinput: One or two <index level filter> to describe break input configurations. diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt index b9a1d7402128..c7c4347a769a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt @@ -8,7 +8,7 @@ Required properties: for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap"; for 66ak2g - compatible = "ti,k2g-ecap", "ti,am3352-ecap"; for am654 - compatible = "ti,am654-ecap", "ti,am3352-ecap"; -- #pwm-cells: should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format. The PWM channel index ranges from 0 to 4. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. - reg: physical base address and size of the registers map. diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt index 31c4577157dd..c7e28f6d28be 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt @@ -7,7 +7,7 @@ Required properties: for am654 - compatible = "ti,am654-ehrpwm", "ti-am3352-ehrpwm"; for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm"; for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm"; -- #pwm-cells: should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. - reg: physical base address and size of the registers map. diff --git a/Documentation/devicetree/bindings/pwm/pwm-zx.txt b/Documentation/devicetree/bindings/pwm/pwm-zx.txt index a6bcc75c9164..3c8fe7aa8269 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-zx.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-zx.txt @@ -7,7 +7,7 @@ Required properties: - clock-names: "pclk" for PCLK, "wclk" for WCLK to the PWM controller. The PCLK is for register access, while WCLK is the reference clock for calculating period and duty cycles. - - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of + - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt deleted file mode 100644 index 8556263b8502..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm.txt +++ /dev/null @@ -1,69 +0,0 @@ -Specifying PWM information for devices -====================================== - -1) PWM user nodes ------------------ - -PWM users should specify a list of PWM devices that they want to use -with a property containing a 'pwm-list': - - pwm-list ::= <single-pwm> [pwm-list] - single-pwm ::= <pwm-phandle> <pwm-specifier> - pwm-phandle : phandle to PWM controller node - pwm-specifier : array of #pwm-cells specifying the given PWM - (controller specific) - -PWM properties should be named "pwms". The exact meaning of each pwms -property must be documented in the device tree binding for each device. -An optional property "pwm-names" may contain a list of strings to label -each of the PWM devices listed in the "pwms" property. If no "pwm-names" -property is given, the name of the user node will be used as fallback. - -Drivers for devices that use more than a single PWM device can use the -"pwm-names" property to map the name of the PWM device requested by the -pwm_get() call to an index into the list given by the "pwms" property. - -The following example could be used to describe a PWM-based backlight -device: - - pwm: pwm { - #pwm-cells = <2>; - }; - - [...] - - bl: backlight { - pwms = <&pwm 0 5000000>; - pwm-names = "backlight"; - }; - -Note that in the example above, specifying the "pwm-names" is redundant -because the name "backlight" would be used as fallback anyway. - -pwm-specifier typically encodes the chip-relative PWM number and the PWM -period in nanoseconds. - -Optionally, the pwm-specifier can encode a number of flags (defined in -<dt-bindings/pwm/pwm.h>) in a third cell: -- PWM_POLARITY_INVERTED: invert the PWM signal polarity - -Example with optional PWM specifier for inverse polarity - - bl: backlight { - pwms = <&pwm 0 5000000 PWM_POLARITY_INVERTED>; - pwm-names = "backlight"; - }; - -2) PWM controller nodes ------------------------ - -PWM controller nodes must specify the number of cells used for the -specifier using the '#pwm-cells' property. - -An example PWM controller might look like this: - - pwm: pwm@7000a000 { - compatible = "nvidia,tegra20-pwm"; - reg = <0x7000a000 0x100>; - #pwm-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml new file mode 100644 index 000000000000..aad99d505bb0 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM controllers (providers) + +maintainers: + - Thierry Reding thierry.reding@gmail.com + +properties: + $nodename: + pattern: "^pwm(@.*|-[0-9a-f])*$" + + "#pwm-cells": + description: + Number of cells in a PWM specifier. + +required: + - "#pwm-cells" + +examples: + - | + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index fbd6a4f943ce..a29137869f7a 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -20,7 +20,7 @@ Required Properties: - "renesas,pwm-r8a77990": for R-Car E3 - "renesas,pwm-r8a77995": for R-Car D3 - reg: base address and length of the registers block for the PWM. -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format. - clocks: clock phandle and specifier pair. - pinctrl-0: phandle, referring to a default pin configuration node. diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt index 848a92b53d81..966994968069 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt @@ -19,11 +19,11 @@ Required Properties: - reg: Base address and length of each memory resource used by the PWM controller hardware module.
- - #pwm-cells: should be 3. See pwm.txt in this directory for a description of + - #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED.
-Please refer to pwm.txt in this directory for details of the common PWM bindings +Please refer to pwm-consumers.yaml in this directory for details of the common PWM bindings used by client devices.
Example: R8A7740 (R-Mobile A1) TPU controller node diff --git a/Documentation/devicetree/bindings/pwm/spear-pwm.txt b/Documentation/devicetree/bindings/pwm/spear-pwm.txt index b486de2c3fe3..95894128b62f 100644 --- a/Documentation/devicetree/bindings/pwm/spear-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/spear-pwm.txt @@ -5,7 +5,7 @@ Required properties: - "st,spear320-pwm" - "st,spear1340-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt index cb209646bf13..f401316e0248 100644 --- a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt @@ -7,7 +7,7 @@ subdevices of the STMPE MFD device. Required properties: - compatible: should be: - "st,stmpe-pwm" -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt index 4e32bee11201..d97ca1964e94 100644 --- a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt @@ -6,7 +6,7 @@ On TWL6030 series: PWM0 and PWM1
Required properties: - compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm" -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt index 9f4b46090782..31ca1b032ef0 100644 --- a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt +++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt @@ -6,7 +6,7 @@ On TWL6030 series: LED PWM (mainly used as charging indicator LED)
Required properties: - compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled" -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of the cells format.
Example: diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt index a76390e6df2e..4fba93ce1985 100644 --- a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt @@ -3,7 +3,7 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller Required properties: - compatible: should be "via,vt8500-pwm" - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 3. See pwm.txt in this directory for a description of +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of the cells format. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. - clocks: phandle to the PWM source clock diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index 3d78d507e29f..252edcc2e381 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -27,7 +27,7 @@ Required properties: -------------------- - compatible: Should be "pwm-regulator"
-- pwms: PWM specification (See: ../pwm/pwm.txt) +- pwms: PWM specification (See: ../pwm/pwm-consumers.yaml)
Only required for Voltage Table Mode: - voltage-table: Voltage and Duty-Cycle table consisting of 2 cells diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt index 5a4b9ddd9470..0c7bd51c19eb 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt @@ -42,7 +42,7 @@ Required properties: - compatible: Must be one of: * ingenic,jz4740-pwm * ingenic,jz4725b-pwm -- #pwm-cells: Should be 3. See ../pwm/pwm.txt for a description of the cell +- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell format. - clocks: List of phandle & clock specifiers for the TCU clocks. - clock-names: List of name strings for the TCU clocks.