Enables the ADV7180 decoder sensor. The ADV7180 connects to the parallel-bus mux input on ipu1_csi0_mux.
On the sabreauto, two analog video inputs are routed to the ADV7180, composite on Ain1, and composite on Ain3. Those inputs are defined via inputs and input-names under the ADV7180 node. The ADV7180 power pin is via max7310_b port expander.
Signed-off-by: Steve Longerbeam steve_longerbeam@mentor.com --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 62 ++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index d74882a..9222026 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -147,10 +147,48 @@ gpio-controller; #gpio-cells = <2>; }; + + camera: adv7180@21 { + compatible = "adi,adv7180"; + reg = <0x21>; + powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <27 0x8>; + inputs = <0x00 0x02>; + input-names = "ADV7180 Composite on Ain1", + "ADV7180 Composite on Ain3"; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; }; }; };
+&ipu1_smfc0 { + fim { + enable = <1>; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + &clks { assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_PLL4_BYPASS>, @@ -451,6 +489,30 @@ >; };
+ pinctrl_ipu1_csi0: ipu1grp-csi0 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x80000000 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x80000000 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x80000000 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x80000000 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x80000000 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x80000000 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x80000000 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x80000000 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1