The BVB clock rate computation doesn't take into account a mode clock of 594MHz that we're going to need to support 4k60.
Signed-off-by: Maxime Ripard maxime@cerno.tech --- drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index eee9751009c2..eaee853bb404 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -91,7 +91,6 @@ # define VC4_HD_M_ENABLE BIT(0)
#define CEC_CLOCK_FREQ 40000 -#define VC4_HSM_MID_CLOCK 149985000
#define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000)
@@ -739,7 +738,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder, conn_state_to_vc4_hdmi_conn_state(conn_state); struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); - unsigned long pixel_rate, hsm_rate; + unsigned long bvb_rate, pixel_rate, hsm_rate; int ret;
ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev); @@ -793,12 +792,14 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
vc4_hdmi_cec_update_clk_div(vc4_hdmi);
- /* - * FIXME: When the pixel freq is 594MHz (4k60), this needs to be setup - * at 300MHz. - */ - ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, - (hsm_rate > VC4_HSM_MID_CLOCK ? 150000000 : 75000000)); + if (pixel_rate > 297000000) + bvb_rate = 300000000; + else if (pixel_rate > 148500000) + bvb_rate = 150000000; + else + bvb_rate = 75000000; + + ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate); if (ret) { DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret); clk_disable_unprepare(vc4_hdmi->hsm_clock);