The 7nm, 10nm and 14nm drivers would store interim data used during VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data structures to the onstack storage. While we are at it, drop unused/static 'config' data, unused config fields, etc.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 167 ++++------- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 334 +++++++-------------- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 166 ++++------ 3 files changed, 220 insertions(+), 447 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index b937e77b3c37..1fbb54f4df98 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -36,43 +36,25 @@ */
#define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; +#define FRAC_BITS 18
/* v3.0.0 10nm implementation that requires the old timings settings */ #define DSI_PHY_10NM_QUIRK_OLD_TIMINGS BIT(0)
struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; bool enable_ssc; bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; u32 ssc_freq; u32 ssc_offset; u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; + + /* out */ + u32 pll_prop_gain_rate; + u32 decimal_div_start; + u32 frac_div_start; + u32 pll_clock_inverters; + u32 ssc_stepsize; + u32 ssc_div_per; };
struct pll_10nm_cached_state { @@ -88,15 +70,11 @@ struct dsi_pll_10nm {
struct msm_dsi_phy *phy;
- u64 vco_ref_clk_rate; u64 vco_current_rate;
/* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock;
- struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - struct pll_10nm_cached_state cached_state;
struct dsi_pll_10nm *slave; @@ -110,34 +88,19 @@ struct dsi_pll_10nm { */ static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
-static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) +static void dsi_pll_setup_config(struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; config->ssc_freq = 31500; config->ssc_offset = 5000; config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false;
config->enable_ssc = false; - config->ssc_center = 0; + config->ssc_center = false; }
-static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; + u64 fref = VCO_REF_CLK_RATE; u64 pll_freq; u64 divider; u64 dec, dec_multiple; @@ -146,40 +109,32 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
pll_freq = pll->vco_current_rate;
- if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; + divider = fref * 2;
- multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; dec_multiple = div_u64(pll_freq * multiplier, divider); dec = div_u64_rem(dec_multiple, multiplier, &frac);
if (pll_freq <= 1900000000UL) - regs->pll_prop_gain_rate = 8; + config->pll_prop_gain_rate = 8; else if (pll_freq <= 3000000000UL) - regs->pll_prop_gain_rate = 10; + config->pll_prop_gain_rate = 10; else - regs->pll_prop_gain_rate = 12; + config->pll_prop_gain_rate = 12; if (pll_freq < 1100000000UL) - regs->pll_clock_inverters = 8; + config->pll_clock_inverters = 8; else - regs->pll_clock_inverters = 0; + config->pll_clock_inverters = 0;
- regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; + config->decimal_div_start = dec; + config->frac_div_start = frac; }
#define SSC_CENTER BIT(0) #define SSC_EN BIT(1)
-static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; u32 ssc_per; u32 ssc_mod; u64 ssc_step_size; @@ -190,58 +145,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) return; }
- ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - 1; ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); ssc_per -= ssc_mod;
- frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); + frac = config->frac_div_start; + ssc_step_size = config->decimal_div_start; + ssc_step_size *= (1 << FRAC_BITS); ssc_step_size += frac; ssc_step_size *= config->ssc_offset; ssc_step_size *= (config->ssc_adj_per + 1); ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
- regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + config->ssc_div_per = ssc_per; + config->ssc_stepsize = ssc_step_size;
pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); + config->decimal_div_start, frac, FRAC_BITS); pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", ssc_per, (u32)ssc_step_size, config->ssc_adj_per); }
-static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *regs = &pll->reg_setup;
- if (pll->pll_configuration.enable_ssc) { + if (config->enable_ssc) { pr_debug("SSC is enabled\n");
dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); + config->ssc_stepsize & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); + config->ssc_stepsize >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); + config->ssc_div_per & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); + config->ssc_div_per >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, - regs->ssc_adjper_low); + config->ssc_adj_per & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, - regs->ssc_adjper_high); + config->ssc_adj_per >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); } }
@@ -271,50 +217,48 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll) dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); }
-static void dsi_pll_commit(struct dsi_pll_10nm *pll) +static void dsi_pll_commit(struct dsi_pll_10nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *reg = &pll->reg_setup;
dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, - reg->decimal_div_start); + config->decimal_div_start); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, - reg->frac_div_start_low); + config->frac_div_start & 0xff); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, - reg->frac_div_start_mid); + (config->frac_div_start & 0xff00) >> 8); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, - reg->frac_div_start_high); - dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, - reg->pll_lockdet_rate); + (config->frac_div_start & 0x30000) >> 16); + dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, 64); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); dsi_phy_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, - reg->pll_clock_inverters); + config->pll_clock_inverters); }
static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); + struct dsi_pll_config config;
DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->phy->id, rate, parent_rate);
pll_10nm->vco_current_rate = rate; - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
- dsi_pll_setup_config(pll_10nm); + dsi_pll_setup_config(&config);
- dsi_pll_calc_dec_frac(pll_10nm); + dsi_pll_calc_dec_frac(pll_10nm, &config);
- dsi_pll_calc_ssc(pll_10nm); + dsi_pll_calc_ssc(pll_10nm, &config);
- dsi_pll_commit(pll_10nm); + dsi_pll_commit(pll_10nm, &config);
dsi_pll_config_hzindep_reg(pll_10nm);
- dsi_pll_ssc_commit(pll_10nm); + dsi_pll_ssc_commit(pll_10nm, &config);
/* flush, ensure all register writes are done*/ wmb(); @@ -461,9 +405,8 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw); - struct dsi_pll_config *config = &pll_10nm->pll_configuration; void __iomem *base = pll_10nm->phy->pll_base; - u64 ref_clk = pll_10nm->vco_ref_clk_rate; + u64 ref_clk = VCO_REF_CLK_RATE; u64 vco_rate = 0x0; u64 multiplier; u32 frac; @@ -483,7 +426,7 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, * TODO: * 1. Assumes prescaler is disabled */ - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; pll_freq = dec * (ref_clk * 2); tmp64 = (ref_clk * 2 * frac); pll_freq += div_u64(tmp64, multiplier); @@ -565,7 +508,7 @@ static int dsi_10nm_restore_state(struct msm_dsi_phy *phy) val |= cached->pll_mux; dsi_phy_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val);
- ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); + ret = dsi_pll_10nm_vco_set_rate(phy->vco_hw, pll_10nm->vco_current_rate, VCO_REF_CLK_RATE); if (ret) { DRM_DEV_ERROR(&pll_10nm->phy->pdev->dev, "restore vco rate failed. ret=%d\n", ret); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 8b4865c5796d..d08ad0c632b4 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -37,51 +37,19 @@ #define VCO_MIN_RATE 1300000000UL #define VCO_MAX_RATE 2600000000UL
-#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 +struct dsi_pll_config { + u64 vco_current_rate;
-struct dsi_pll_input { - u32 fref; /* reference clk */ - u32 fdata; /* bit clock rate */ - u32 dsiclk_sel; /* Mux configuration (see diagram) */ u32 ssc_en; /* SSC enable/disable */ - u32 ldo_en;
/* fixed params */ - u32 refclk_dbler_en; - u32 vco_measure_time; - u32 kvco_measure_time; - u32 bandgap_timer; - u32 pll_wakeup_timer; u32 plllock_cnt; - u32 plllock_rng; u32 ssc_center; u32 ssc_adj_period; u32 ssc_spread; u32 ssc_freq; - u32 pll_ie_trim; - u32 pll_ip_trim; - u32 pll_iptat_trim; - u32 pll_cpcset_cur; - u32 pll_cpmset_cur; - - u32 pll_icpmset; - u32 pll_icpcset; - - u32 pll_icpmset_p; - u32 pll_icpmset_m; - - u32 pll_icpcset_p; - u32 pll_icpcset_m; - - u32 pll_lpf_res1; - u32 pll_lpf_cap1; - u32 pll_lpf_cap2; - u32 pll_c3ctrl; - u32 pll_r3ctrl; -};
-struct dsi_pll_output { - u32 pll_txclk_en; + /* calculated */ u32 dec_start; u32 div_frac_start; u32 ssc_period; @@ -91,19 +59,6 @@ struct dsi_pll_output { u32 pll_vco_count; u32 pll_kvco_div_ref; u32 pll_kvco_count; - u32 pll_misc1; - u32 pll_lpf2_postdiv; - u32 pll_resetsm_cntrl; - u32 pll_resetsm_cntrl2; - u32 pll_resetsm_cntrl5; - u32 pll_kvco_code; - - u32 cmn_clk_cfg0; - u32 cmn_clk_cfg1; - u32 cmn_ldo_cntrl; - - u32 pll_postdiv; - u32 fcvo; };
struct pll_14nm_cached_state { @@ -117,15 +72,9 @@ struct dsi_pll_14nm {
struct msm_dsi_phy *phy;
- struct dsi_pll_input in; - struct dsi_pll_output out; - /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock;
- u64 vco_current_rate; - u64 vco_ref_clk_rate; - struct pll_14nm_cached_state cached_state;
struct dsi_pll_14nm *slave; @@ -195,78 +144,50 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, return pll_locked; }
-static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) +static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf) { - pll->in.fref = pll->vco_ref_clk_rate; - pll->in.fdata = 0; - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ - pll->in.ldo_en = 0; /* disabled for now */ - /* fixed input */ - pll->in.refclk_dbler_en = 0; - pll->in.vco_measure_time = 5; - pll->in.kvco_measure_time = 5; - pll->in.bandgap_timer = 4; - pll->in.pll_wakeup_timer = 5; - pll->in.plllock_cnt = 1; - pll->in.plllock_rng = 0; + pconf->plllock_cnt = 1;
/* * SSC is enabled by default. We might need DT props for configuring * some SSC params like PPM and center/down spread etc. */ - pll->in.ssc_en = 1; - pll->in.ssc_center = 0; /* down spread by default */ - pll->in.ssc_spread = 5; /* PPM / 1000 */ - pll->in.ssc_freq = 31500; /* default recommended */ - pll->in.ssc_adj_period = 37; - - pll->in.pll_ie_trim = 4; - pll->in.pll_ip_trim = 4; - pll->in.pll_cpcset_cur = 1; - pll->in.pll_cpmset_cur = 1; - pll->in.pll_icpmset = 4; - pll->in.pll_icpcset = 4; - pll->in.pll_icpmset_p = 0; - pll->in.pll_icpmset_m = 0; - pll->in.pll_icpcset_p = 0; - pll->in.pll_icpcset_m = 0; - pll->in.pll_lpf_res1 = 3; - pll->in.pll_lpf_cap1 = 11; - pll->in.pll_lpf_cap2 = 1; - pll->in.pll_iptat_trim = 7; - pll->in.pll_c3ctrl = 2; - pll->in.pll_r3ctrl = 1; + pconf->ssc_en = 1; + pconf->ssc_center = 0; /* down spread by default */ + pconf->ssc_spread = 5; /* PPM / 1000 */ + pconf->ssc_freq = 31500; /* default recommended */ + pconf->ssc_adj_period = 37; }
#define CEIL(x, y) (((x) + ((y) - 1)) / (y))
-static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { u32 period, ssc_period; u32 ref, rem; u64 step_size;
- DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate); + DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE);
- ssc_period = pll->in.ssc_freq / 500; - period = (u32)pll->vco_ref_clk_rate / 1000; + ssc_period = pconf->ssc_freq / 500; + period = (u32)VCO_REF_CLK_RATE / 1000; ssc_period = CEIL(period, ssc_period); ssc_period -= 1; - pll->out.ssc_period = ssc_period; + pconf->ssc_period = ssc_period;
- DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, - pll->in.ssc_spread, pll->out.ssc_period); + DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq, + pconf->ssc_spread, pconf->ssc_period);
- step_size = (u32)pll->vco_current_rate; - ref = pll->vco_ref_clk_rate; + step_size = (u32)pconf->vco_current_rate; + ref = VCO_REF_CLK_RATE; ref /= 1000; step_size = div_u64(step_size, ref); step_size <<= 20; step_size = div_u64(step_size, 1000); - step_size *= pll->in.ssc_spread; + step_size *= pconf->ssc_spread; step_size = div_u64(step_size, 1000); - step_size *= (pll->in.ssc_adj_period + 1); + step_size *= (pconf->ssc_adj_period + 1);
rem = 0; step_size = div_u64_rem(step_size, ssc_period + 1, &rem); @@ -277,18 +198,16 @@ static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
step_size &= 0x0ffff; /* take lower 16 bits */
- pll->out.ssc_step_size = step_size; + pconf->ssc_step_size = step_size; }
-static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; u64 multiplier = BIT(20); u64 dec_start_multiple, dec_start, pll_comp_val; u32 duration, div_frac_start; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; + u64 vco_clk_rate = pconf->vco_current_rate; + u64 fref = VCO_REF_CLK_RATE;
DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
@@ -297,14 +216,14 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
dec_start = div_u64(dec_start_multiple, multiplier);
- pout->dec_start = (u32)dec_start; - pout->div_frac_start = div_frac_start; + pconf->dec_start = (u32)dec_start; + pconf->div_frac_start = div_frac_start;
- if (pin->plllock_cnt == 0) + if (pconf->plllock_cnt == 0) duration = 1024; - else if (pin->plllock_cnt == 1) + else if (pconf->plllock_cnt == 1) duration = 256; - else if (pin->plllock_cnt == 2) + else if (pconf->plllock_cnt == 2) duration = 128; else duration = 32; @@ -313,10 +232,7 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) pll_comp_val = div_u64(pll_comp_val, multiplier); do_div(pll_comp_val, 10);
- pout->plllock_cmp = (u32)pll_comp_val; - - pout->pll_txclk_en = 1; - pout->cmn_ldo_cntrl = 0x3c; + pconf->plllock_cmp = (u32)pll_comp_val; }
static u32 pll_14nm_kvco_slop(u32 vrate) @@ -333,74 +249,66 @@ static u32 pll_14nm_kvco_slop(u32 vrate) return slop; }
-static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; + u64 vco_clk_rate = pconf->vco_current_rate; + u64 fref = VCO_REF_CLK_RATE; + u32 vco_measure_time = 5; + u32 kvco_measure_time = 5; u64 data; u32 cnt;
- data = fref * pin->vco_measure_time; + data = fref * vco_measure_time; do_div(data, 1000000); data &= 0x03ff; /* 10 bits */ data -= 2; - pout->pll_vco_div_ref = data; + pconf->pll_vco_div_ref = data;
data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ - data *= pin->vco_measure_time; + data *= vco_measure_time; do_div(data, 10); - pout->pll_vco_count = data; + pconf->pll_vco_count = data;
- data = fref * pin->kvco_measure_time; + data = fref * kvco_measure_time; do_div(data, 1000000); data &= 0x03ff; /* 10 bits */ data -= 1; - pout->pll_kvco_div_ref = data; + pconf->pll_kvco_div_ref = data;
cnt = pll_14nm_kvco_slop(vco_clk_rate); cnt *= 2; cnt /= 100; - cnt *= pin->kvco_measure_time; - pout->pll_kvco_count = cnt; - - pout->pll_misc1 = 16; - pout->pll_resetsm_cntrl = 48; - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; - pout->pll_kvco_code = 0; + cnt *= kvco_measure_time; + pconf->pll_kvco_count = cnt; }
-static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; u8 data;
- data = pin->ssc_adj_period; + data = pconf->ssc_adj_period; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); - data = (pin->ssc_adj_period >> 8); + data = (pconf->ssc_adj_period >> 8); data &= 0x03; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
- data = pout->ssc_period; + data = pconf->ssc_period; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); - data = (pout->ssc_period >> 8); + data = (pconf->ssc_period >> 8); data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
- data = pout->ssc_step_size; + data = pconf->ssc_step_size; data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); - data = (pout->ssc_step_size >> 8); + data = (pconf->ssc_step_size >> 8); data &= 0x0ff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
- data = (pin->ssc_center & 0x01); + data = (pconf->ssc_center & 0x01); data <<= 1; data |= 0x01; /* enable */ dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); @@ -409,8 +317,7 @@ static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) }
static void pll_db_commit_common(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) + struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; u8 data; @@ -419,55 +326,41 @@ static void pll_db_commit_common(struct dsi_pll_14nm *pll, data = 0; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
- data = pout->pll_txclk_en; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, 1);
- data = pout->pll_resetsm_cntrl; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); - data = pout->pll_resetsm_cntrl2; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); - data = pout->pll_resetsm_cntrl5; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, 48); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, 4 << 3); /* bandgap_timer */ + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, 5); /* pll_wakeup_timer */
- data = pout->pll_vco_div_ref & 0xff; + data = pconf->pll_vco_div_ref & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); - data = (pout->pll_vco_div_ref >> 8) & 0x3; + data = (pconf->pll_vco_div_ref >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
- data = pout->pll_kvco_div_ref & 0xff; + data = pconf->pll_kvco_div_ref & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); - data = (pout->pll_kvco_div_ref >> 8) & 0x3; + data = (pconf->pll_kvco_div_ref >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
- data = pout->pll_misc1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, 16);
- data = pin->pll_ie_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, 4);
- data = pin->pll_ip_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, 4);
- data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, 1 << 3 | 1);
- data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, 0 << 3 | 0);
- data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, 0 << 3 | 0);
- data = pin->pll_icpmset << 3 | pin->pll_icpcset; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, 4 << 3 | 4);
- data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, 1 << 4 | 11);
- data = pin->pll_iptat_trim; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, 7);
- data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, 1 << 4 | 2); }
static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) @@ -488,8 +381,7 @@ static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) }
static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) + struct dsi_pll_config *pconf) { void __iomem *base = pll->phy->pll_base; void __iomem *cmn_base = pll->phy->base; @@ -497,57 +389,64 @@ static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
DBG("DSI%d PLL", pll->phy->id);
- data = pout->cmn_ldo_cntrl; - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, 0x3c);
- pll_db_commit_common(pll, pin, pout); + pll_db_commit_common(pll, pconf);
pll_14nm_software_reset(pll);
- data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ - dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); + /* Use the /2 path in Mux */ + dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, 1);
data = 0xff; /* data, clk, pll normal operation */ dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
/* configure the frequency dependent pll registers */ - data = pout->dec_start; + data = pconf->dec_start; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
- data = pout->div_frac_start & 0xff; + data = pconf->div_frac_start & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); - data = (pout->div_frac_start >> 8) & 0xff; + data = (pconf->div_frac_start >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); - data = (pout->div_frac_start >> 16) & 0xf; + data = (pconf->div_frac_start >> 16) & 0xf; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
- data = pout->plllock_cmp & 0xff; + data = pconf->plllock_cmp & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
- data = (pout->plllock_cmp >> 8) & 0xff; + data = (pconf->plllock_cmp >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
- data = (pout->plllock_cmp >> 16) & 0x3; + data = (pconf->plllock_cmp >> 16) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
- data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; + data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */ dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
- data = pout->pll_vco_count & 0xff; + data = pconf->pll_vco_count & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); - data = (pout->pll_vco_count >> 8) & 0xff; + data = (pconf->pll_vco_count >> 8) & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
- data = pout->pll_kvco_count & 0xff; + data = pconf->pll_kvco_count & 0xff; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); - data = (pout->pll_kvco_count >> 8) & 0x3; + data = (pconf->pll_kvco_count >> 8) & 0x3; dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
- data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; - dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); + /* + * High nibble configures the post divider internal to the VCO. It's + * fixed to divide by 1 for now. + * + * 0: divided by 1 + * 1: divided by 2 + * 2: divided by 4 + * 3: divided by 8 + */ + dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, 0 << 4 | 3);
- if (pin->ssc_en) - pll_db_commit_ssc(pll); + if (pconf->ssc_en) + pll_db_commit_ssc(pll, pconf);
wmb(); /* make sure register committed */ } @@ -559,35 +458,20 @@ static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw); - struct dsi_pll_input *pin = &pll_14nm->in; - struct dsi_pll_output *pout = &pll_14nm->out; + struct dsi_pll_config conf;
DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate, parent_rate);
- pll_14nm->vco_current_rate = rate; - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - - dsi_pll_14nm_input_init(pll_14nm); - - /* - * This configures the post divider internal to the VCO. It's - * fixed to divide by 1 for now. - * - * tx_band = pll_postdiv. - * 0: divided by 1 - * 1: divided by 2 - * 2: divided by 4 - * 3: divided by 8 - */ - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; + dsi_pll_14nm_config_init(&conf); + conf.vco_current_rate = rate;
- pll_14nm_dec_frac_calc(pll_14nm); + pll_14nm_dec_frac_calc(pll_14nm, &conf);
- if (pin->ssc_en) - pll_14nm_ssc_calc(pll_14nm); + if (conf.ssc_en) + pll_14nm_ssc_calc(pll_14nm, &conf);
- pll_14nm_calc_vco_count(pll_14nm); + pll_14nm_calc_vco_count(pll_14nm, &conf);
/* commit the slave DSI PLL registers if we're master. Note that we * don't lock the slave PLL. We just ensure that the PLL/PHY registers @@ -596,10 +480,10 @@ static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) { struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
- pll_db_commit_14nm(pll_14nm_slave, pin, pout); + pll_db_commit_14nm(pll_14nm_slave, &conf); }
- pll_db_commit_14nm(pll_14nm, pin, pout); + pll_db_commit_14nm(pll_14nm, &conf);
return 0; } diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index 4df237ad0eaf..ce6ae2fba993 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -36,43 +36,24 @@ */
#define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; +#define FRAC_BITS 18
/* Hardware is V4.1 */ #define DSI_PHY_7NM_QUIRK_V4_1 BIT(0)
struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; bool enable_ssc; bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; u32 ssc_freq; u32 ssc_offset; u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; + + /* out */ + u32 decimal_div_start; + u32 frac_div_start; + u32 pll_clock_inverters; + u32 ssc_stepsize; + u32 ssc_div_per; };
struct pll_7nm_cached_state { @@ -88,15 +69,11 @@ struct dsi_pll_7nm {
struct msm_dsi_phy *phy;
- u64 vco_ref_clk_rate; u64 vco_current_rate;
/* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ spinlock_t postdiv_lock;
- struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - struct pll_7nm_cached_state cached_state;
struct dsi_pll_7nm *slave; @@ -110,35 +87,20 @@ struct dsi_pll_7nm { */ static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX];
-static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) +static void dsi_pll_setup_config(struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; config->ssc_freq = 31500; config->ssc_offset = 4800; config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false;
/* TODO: ssc enable */ config->enable_ssc = false; config->ssc_center = 0; }
-static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; + u64 fref = VCO_REF_CLK_RATE; u64 pll_freq; u64 divider; u64 dec, dec_multiple; @@ -147,42 +109,34 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll)
pll_freq = pll->vco_current_rate;
- if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; + divider = fref * 2;
- multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; dec_multiple = div_u64(pll_freq * multiplier, divider); div_u64_rem(dec_multiple, multiplier, &frac);
dec = div_u64(dec_multiple, multiplier);
if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1)) - regs->pll_clock_inverters = 0x28; + config->pll_clock_inverters = 0x28; else if (pll_freq <= 1000000000ULL) - regs->pll_clock_inverters = 0xa0; + config->pll_clock_inverters = 0xa0; else if (pll_freq <= 2500000000ULL) - regs->pll_clock_inverters = 0x20; + config->pll_clock_inverters = 0x20; else if (pll_freq <= 3020000000ULL) - regs->pll_clock_inverters = 0x00; + config->pll_clock_inverters = 0x00; else - regs->pll_clock_inverters = 0x40; + config->pll_clock_inverters = 0x40;
- regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; + config->decimal_div_start = dec; + config->frac_div_start = frac; }
#define SSC_CENTER BIT(0) #define SSC_EN BIT(1)
-static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; u32 ssc_per; u32 ssc_mod; u64 ssc_step_size; @@ -193,58 +147,49 @@ static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) return; }
- ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_per = DIV_ROUND_CLOSEST(VCO_REF_CLK_RATE, config->ssc_freq) / 2 - 1; ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); ssc_per -= ssc_mod;
- frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); + frac = config->frac_div_start; + ssc_step_size = config->decimal_div_start; + ssc_step_size *= (1 << FRAC_BITS); ssc_step_size += frac; ssc_step_size *= config->ssc_offset; ssc_step_size *= (config->ssc_adj_per + 1); ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000);
- regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + config->ssc_div_per = ssc_per; + config->ssc_stepsize = ssc_step_size;
pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); + config->decimal_div_start, frac, FRAC_BITS); pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", ssc_per, (u32)ssc_step_size, config->ssc_adj_per); }
-static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *regs = &pll->reg_setup;
- if (pll->pll_configuration.enable_ssc) { + if (config->enable_ssc) { pr_debug("SSC is enabled\n");
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); + config->ssc_stepsize & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); + config->ssc_stepsize >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); + config->ssc_div_per & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); + config->ssc_div_per >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, - regs->ssc_adjper_low); + config->ssc_adj_per & 0xff); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, - regs->ssc_adjper_high); + config->ssc_adj_per >> 8); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); + SSC_EN | (config->ssc_center ? SSC_CENTER : 0)); } }
@@ -296,44 +241,46 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll) } }
-static void dsi_pll_commit(struct dsi_pll_7nm *pll) +static void dsi_pll_commit(struct dsi_pll_7nm *pll, struct dsi_pll_config *config) { void __iomem *base = pll->phy->pll_base; - struct dsi_pll_regs *reg = &pll->reg_setup;
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, config->decimal_div_start); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, + config->frac_div_start & 0xff); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, + (config->frac_div_start & 0xff00) >> 8); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, + (config->frac_div_start & 0x30000) >> 16); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ - dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); + dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, config->pll_clock_inverters); }
static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); + struct dsi_pll_config config;
DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->phy->id, rate, parent_rate);
pll_7nm->vco_current_rate = rate; - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
- dsi_pll_setup_config(pll_7nm); + dsi_pll_setup_config(&config);
- dsi_pll_calc_dec_frac(pll_7nm); + dsi_pll_calc_dec_frac(pll_7nm, &config);
- dsi_pll_calc_ssc(pll_7nm); + dsi_pll_calc_ssc(pll_7nm, &config);
- dsi_pll_commit(pll_7nm); + dsi_pll_commit(pll_7nm, &config);
dsi_pll_config_hzindep_reg(pll_7nm);
- dsi_pll_ssc_commit(pll_7nm); + dsi_pll_ssc_commit(pll_7nm, &config);
/* flush, ensure all register writes are done*/ wmb(); @@ -486,9 +433,8 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct dsi_pll_7nm *pll_7nm = to_pll_7nm(hw); - struct dsi_pll_config *config = &pll_7nm->pll_configuration; void __iomem *base = pll_7nm->phy->pll_base; - u64 ref_clk = pll_7nm->vco_ref_clk_rate; + u64 ref_clk = VCO_REF_CLK_RATE; u64 vco_rate = 0x0; u64 multiplier; u32 frac; @@ -508,7 +454,7 @@ static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, * TODO: * 1. Assumes prescaler is disabled */ - multiplier = 1 << config->frac_bits; + multiplier = 1 << FRAC_BITS; pll_freq = dec * (ref_clk * 2); tmp64 = (ref_clk * 2 * frac); pll_freq += div_u64(tmp64, multiplier); @@ -590,7 +536,7 @@ static int dsi_7nm_restore_state(struct msm_dsi_phy *phy) val |= cached->pll_mux; dsi_phy_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val);
- ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); + ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw, pll_7nm->vco_current_rate, VCO_REF_CLK_RATE); if (ret) { DRM_DEV_ERROR(&pll_7nm->phy->pdev->dev, "restore vco rate failed. ret=%d\n", ret);