From: dillon min dillon.minfei@gmail.com
V6: 1 separate '[PATCH v5 5/8]' patchs to two, each one has a Fixes tags according to Stephen Boyd's suggestion 2 fix panel-ilitek-ili9341 compile warning 'warning: Function parameter or member xxx not described in xxx' with W=1
V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX' for SPI_SIMPLEX_RX mode on stm32 spi controller.
V5: 1 instead of add send dummy data out under SIMPLEX_RX mode, add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver 2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under 'SPI_3WIRE' mode
V4: According to alexandre torgue's suggestion, combine ili9341 and l3gd20's modification on stm32f429-disco board to one patchset.
Changes:
ili9341:
1 update ili9341 panel driver according to Linus's suggestion 2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4 3 merge l3gd20's change to this patchset
V3: 1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c to support serial spi & parallel rgb interface in one driver. 2 update ilitek,ili9341.yaml dts binding documentation. 3 update stm32f429-disco dts binding
V2: 1 verify ilitek,ili9341.yaml with make O=../linux-stm32 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/ ilitek,ili9341.yaml
V1: 1 add ili9341 drm panel driver 2 add ltdc, spi5 controller for stm32f429-disco 3 add ltdc, spi5 pin map for stm32f429-disco 4 add docs about ili9341 5 fix ltdc driver loading hang in clk set rate bug
L3gd20:
V3: 1 merge stm32f429-disco dtbs binding with ili9341 part
V2: 1 insert blank line at stm32f420-disco.dts line 143 2 add more description for l3gd20 in commit message
V1: 1 enable spi5 controller on stm32f429-disco (dts) 2 add spi5 pinmap for stm32f429-disco (dts) 3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
dillon min (9): ARM: dts: stm32: Add dma config for spi5 ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board dt-bindings: display: panel: Add ilitek ili9341 panel bindings clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup drm/panel: Add ilitek ili9341 panel driver spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
.../bindings/display/panel/ilitek,ili9341.yaml | 69 ++ arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 + arch/arm/boot/dts/stm32f429-disco.dts | 48 + arch/arm/boot/dts/stm32f429.dtsi | 3 + drivers/clk/clk-stm32f4.c | 7 +- drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1288 ++++++++++++++++++++ drivers/spi/spi-stm32.c | 19 +- drivers/spi/spi.c | 3 +- 10 files changed, 1508 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c