Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector and configure the DISP pin group that drives the HDMI transmitter DE pin.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com --- arch/arm/boot/dts/r8a7791-koelsch.dts | 50 ++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0402c498b05b..317f5788a00c 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -210,6 +210,17 @@ states = <3300000 1 1800000 0>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; };
&du { @@ -218,6 +229,11 @@ status = "okay";
ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; port@1 { lvds_connector: endpoint { }; @@ -236,7 +252,7 @@ };
du_pins: du { - renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0"; + renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0"; renesas,function = "du"; };
@@ -440,6 +456,38 @@ }; };
+ hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>;