The HannStar HSD070PWW1 LVDS panel data sheet lists allowed ranges additionally to the typical values for pixel clock rate (64.3 MHz ... 82 MHz) and blanking intervals (54 to 681 clocks horizontally, 3 to 23 lines vertically). This patch replaces this panels' drm_display_mode entry with a display_timing entry to describe acceptable timings. Since the HSYNC/VSYNC are unused, the distribution between front porches, back porches, and sync pulse lengths was chosen at will.
Signed-off-by: Philipp Zabel p.zabel@pengutronix.de --- drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 895af09..47ecdca 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -600,22 +600,22 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = { }, };
-static const struct drm_display_mode hannstar_hsd070pww1_mode = { - .clock = 71100, - .hdisplay = 1280, - .hsync_start = 1280 + 1, - .hsync_end = 1280 + 1 + 158, - .htotal = 1280 + 1 + 158 + 1, - .vdisplay = 800, - .vsync_start = 800 + 1, - .vsync_end = 800 + 1 + 21, - .vtotal = 800 + 1 + 21 + 1, - .vrefresh = 60, +static const struct display_timing hannstar_hsd070pww1_timing = { + .pixelclock = { 64300000, 71100000, 82000000 }, + .hactive = { 1280, 1280, 1280 }, + .hfront_porch = { 1, 1, 10 }, + .hback_porch = { 1, 1, 10 }, + .hsync_len = { 52, 158, 661 }, + .vactive = { 800, 800, 800 }, + .vfront_porch = { 1, 1, 10 }, + .vback_porch = { 1, 1, 10 }, + .vsync_len = { 1, 21, 203 }, + .flags = DISPLAY_FLAGS_DE_HIGH, };
static const struct panel_desc hannstar_hsd070pww1 = { - .modes = &hannstar_hsd070pww1_mode, - .num_modes = 1, + .timings = &hannstar_hsd070pww1_timing, + .num_timings = 1, .bpc = 6, .size = { .width = 151,