On Mon, Dec 07, 2020 at 10:50:23PM +0800, Kevin Tang wrote:
From: Kevin Tang kevin.tang@unisoc.com
DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs which transfers the image data from a video memory buffer to an internal LCD interface.
Cc: Orson Zhai orsonzhai@gmail.com Cc: Chunyan Zhang zhang.lyra@gmail.com Signed-off-by: Kevin Tang kevin.tang@unisoc.com
.../bindings/display/sprd/sprd,sharkl3-dpu.yaml | 83 ++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file mode 100644 index 0000000..a9052e1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+maintainers:
- Kevin Tang kevin.tang@unisoc.com
+description: |
- DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
- which transfers the image data from a video memory buffer to an internal
- LCD interface.
+properties:
- compatible:
- const: sprd,sharkl3-dpu
- reg:
- maxItems: 1
- description:
Physical base address and length of the DPU registers set
Drop. Nothing unique about this.
- interrupts:
- maxItems: 1
- description:
The interrupt signal from DPU
Drop.
- clocks:
- minItems: 2
- clock-names:
- items:
- const: clk_src_128m- const: clk_src_384m- power-domains:
- maxItems: 1
- description: A phandle to DPU power domain node.
Drop.
- iommus:
- maxItems: 1
- description: A phandle to DPU iommu node.
Drop.
With those,
Reviewed-by: Rob Herring robh@kernel.org
- port:
- type: object
- description:
A port node with endpoint definitions as defined inDocumentation/devicetree/bindings/media/video-interfaces.txt.That port should be the output endpoint, usually output tothe associated DSI.+required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- port
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/sprd,sc9860-clk.h>
- dpu: dpu@63000000 {
compatible = "sprd,sharkl3-dpu";reg = <0x63000000 0x1000>;interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;clock-names = "clk_src_128m", "clk_src_384m";clocks = <&pll CLK_TWPLL_128M>,<&pll CLK_TWPLL_384M>;dpu_port: port {dpu_out: endpoint {remote-endpoint = <&dsi_in>;};};- };
-- 2.7.4