Hi Krzysztof,
The driver has been merged into exynos-drm-misc. Could you please check this patch(3/3).
Best regards, Hoegeun
On 07/13/2017 11:20 AM, Hoegeun Kwon wrote:
The display-timing and delay are included in the panel driver. So it should be removed in dts.
Signed-off-by: Hoegeun Kwon hoegeun.kwon@samsung.com
arch/arm/boot/dts/exynos3250-rinato.dts | 22 ---------------------- 1 file changed, 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 443e0c9..6b70c8d 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -242,28 +242,6 @@ vci-supply = <&ldo20_reg>; reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
init-delay = <100>;
flip-horizontal;
flip-vertical;
panel-width-mm = <29>;
panel-height-mm = <29>;
display-timings {
timing-0 {
clock-frequency = <4600000>;
hactive = <320>;
vactive = <320>;
hfront-porch = <1>;
hback-porch = <1>;
hsync-len = <1>;
vfront-porch = <150>;
vback-porch = <1>;
vsync-len = <2>;
};
};
port { dsi_in: endpoint {