Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas.
The original example and usage of clock-names uses a reversed "isfr" and "iahb" clock-names, the rewritten YAML bindings uses the reversed instead of fixing the device trees order.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- .../display/amlogic,meson-dw-hdmi.txt | 119 ------------- .../display/amlogic,meson-dw-hdmi.yaml | 160 ++++++++++++++++++ 2 files changed, 160 insertions(+), 119 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt deleted file mode 100644 index 3a50a7862cf3..000000000000 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt +++ /dev/null @@ -1,119 +0,0 @@ -Amlogic specific extensions to the Synopsys Designware HDMI Controller -====================================================================== - -The Amlogic Meson Synopsys Designware Integration is composed of : -- A Synopsys DesignWare HDMI Controller IP -- A TOP control block controlling the Clocks and PHY -- A custom HDMI PHY in order to convert video to TMDS signal - ___________________________________ -| HDMI TOP |<= HPD -|___________________________________| -| | | -| Synopsys HDMI | HDMI PHY |=> TMDS -| Controller |________________| -|___________________________________|<=> DDC - -The HDMI TOP block only supports HPD sensing. -The Synopsys HDMI Controller interrupt is routed through the -TOP Block interrupt. -Communication to the TOP Block and the Synopsys HDMI Controller is done -via a pair of dedicated addr+read/write registers. -The HDMI PHY is configured by registers in the HHI register block. - -Pixel data arrives in 4:4:4 format from the VENC block and the VPU HDMI mux -selects either the ENCI encoder for the 576i or 480i formats or the ENCP -encoder for all the other formats including interlaced HD formats. - -The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate -DVI timings for the HDMI controller. - -Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare -HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF -audio source interfaces. - -Required properties: -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,meson-gxbb-dw-hdmi" - - GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi" - - GXM (S912) : "amlogic,meson-gxm-dw-hdmi" - followed by the common "amlogic,meson-gx-dw-hdmi" - - G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi" -- reg: Physical base address and length of the controller's registers. -- interrupts: The HDMI interrupt number -- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks, - and the Amlogic Meson venci clocks as described in - Documentation/devicetree/bindings/clock/clock-bindings.txt, - the clocks are soc specific, the clock-names should be "iahb", "isfr", "venci" -- resets, resets-names: must have the phandles to the HDMI apb, glue and phy - resets as described in : - Documentation/devicetree/bindings/reset/reset.txt, - the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy" - -Optional properties: -- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI - logic, as described in the file ../regulator/regulator.txt - -Required nodes: - -The connections to the HDMI ports are modeled using the OF graph -bindings specified in Documentation/devicetree/bindings/graph.txt. - -The following table lists for each supported model the port number -corresponding to each HDMI output and input. - - Port 0 Port 1 ------------------------------------------ - S905 (GXBB) VENC Input TMDS Output - S905X (GXL) VENC Input TMDS Output - S905D (GXL) VENC Input TMDS Output - S912 (GXM) VENC Input TMDS Output - S905X2 (G12A) VENC Input TMDS Output - S905Y2 (G12A) VENC Input TMDS Output - S905D2 (G12A) VENC Input TMDS Output - -Example: - -hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; -}; - -hdmi_tx: hdmi-tx@c883a000 { - compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; - reg = <0x0 0xc883a000 0x0 0x1c>; - interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMI_SYSTEM_RESET>, - <&reset RESET_HDMI_TX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; - clock-names = "isfr", "iahb", "venci"; - #address-cells = <1>; - #size-cells = <0>; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml new file mode 100644 index 000000000000..1212aa7a624f --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic specific extensions to the Synopsys Designware HDMI Controller + +maintainers: + - Neil Armstrong narmstrong@baylibre.com + +description: | + The Amlogic Meson Synopsys Designware Integration is composed of + - A Synopsys DesignWare HDMI Controller IP + - A TOP control block controlling the Clocks and PHY + - A custom HDMI PHY in order to convert video to TMDS signal + ___________________________________ + | HDMI TOP |<= HPD + |___________________________________| + | | | + | Synopsys HDMI | HDMI PHY |=> TMDS + | Controller |________________| + |___________________________________|<=> DDC + + The HDMI TOP block only supports HPD sensing. + The Synopsys HDMI Controller interrupt is routed through the + TOP Block interrupt. + Communication to the TOP Block and the Synopsys HDMI Controller is done + via a pair of dedicated addr+read/write registers. + The HDMI PHY is configured by registers in the HHI register block. + + Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux + selects either the ENCI encoder for the 576i or 480i formats or the ENCP + encoder for all the other formats including interlaced HD formats. + + The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate + DVI timings for the HDMI controller. + + Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare + HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF + audio source interfaces. + + The following table lists for each supported model the port number + corresponding to each HDMI output and input. + + Port 0 Port 1 + ----------------------------------------- + S905 (GXBB) VENC Input TMDS Output + S905X (GXL) VENC Input TMDS Output + S905D (GXL) VENC Input TMDS Output + S912 (GXM) VENC Input TMDS Output + S905X2 (G12A) VENC Input TMDS Output + S905Y2 (G12A) VENC Input TMDS Output + S905D2 (G12A) VENC Input TMDS Output + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson-gxbb-dw-hdmi # GXBB (S905) + - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D) + - amlogic,meson-gxm-dw-hdmi # GXM (S912) + - const: amlogic,meson-gx-dw-hdmi + - enum: + - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2) + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: isfr + - const: iahb + - const: venci + + resets: + minItems: 3 + + reset-names: + items: + - const: hdmitx_apb + - const: hdmitx + - const: hdmitx_phy + + hdmi-supply: + description: phandle to an external 5V regulator to power the HDMI logic + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + port@0: + type: object + description: + A port node modeled using the OF graph + bindings specified in Documentation/devicetree/bindings/graph.txt. + + port@1: + type: object + description: + A port node modeled using the OF graph + bindings specified in Documentation/devicetree/bindings/graph.txt. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port@0 + - port@1 + - "#address-cells" + - "#size-cells" + +examples: + - | + hdmi_tx: hdmi-tx@c883a000 { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + reg = <0xc883a000 0x1c>; + interrupts = <57>; + resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +