drm's debug system writes 10 distinct categories of messages to syslog using a small API[1]: drm_dbg*(10 names), DRM_DEBUG*(8 names), DRM_DEV_DEBUG*(3 names). There are thousands of these callsites, each categorized by their authors.
These callsites can be enabled at runtime by their category, each controlled by a bit in drm.debug (/sys/modules/drm/parameter/debug). In the current "basic" implementation, drm_debug_enabled() tests these bits in __drm_debug each time an API[1] call is executed; while cheap individually, the costs accumulate.
This patch uses dynamic-debug with jump-label to patch enabled calls onto their respective NOOP slots, avoiding all runtime bit-checks of __drm_debug.
Dynamic debug has no concept of category, but we can emulate one by replacing enum categories with a set of prefix-strings; "drm:core:", "drm:kms:" "drm:driver:" etc, and prepend them (at compile time) to the given formats.
Then we can use: `echo module drm format "^drm:core: " +p > control`
to enable the whole category with one query.
This conversion yields ~2100 new callsites on my i7/i915 laptop:
dyndbg: 195 debug prints in module drm_kms_helper dyndbg: 298 debug prints in module drm dyndbg: 1630 debug prints in module i915
CONFIG_DRM_USE_DYNAMIC_DEBUG enables this, and is available if CONFIG_DYNAMIC_DEBUG or CONFIG_DYNAMIC_DEBUG_CORE is chosen, and if CONFIG_JUMP_LABEL is enabled; this because its required to get the promised optimizations.
The "basic" -> "dyndbg" switchover is layered into the macro scheme
A. use DEFINE_DYNAMIC_DEBUG_CATEGORIES(debug, __drm_debug, "DRM debug category-per-bit control", { "drm:core:", "enable CORE debug messages" }, { "drm:kms:", "enable KMS debug messages" }, ...);
B. A "classy" version of DRM_UT_<CATs> map, named DRM_DBG_CAT_<CATs>
DRM_DBG_CLASS_<CATs> was proposed, I had agreed, but reconsidered; CATEGORY is already DRM's term-of-art, and adding a near-synonym 'CLASS' only adds ambiguity.
"basic": DRM_DBG_CAT_<CATs> <=== DRM_UT_<CATs>. Identity map. "dyndbg": #define DRM_DBG_CAT_KMS "drm:kms: " #define DRM_DBG_CAT_PRIME "drm:prime: " #define DRM_DBG_CAT_ATOMIC "drm:atomic: "
DRM_UT_* are preserved, since theyre used elsewhere. We can probably reduce its use further, but thats a separate thing.
C. drm_dev_dbg() & drm_debug() are interposed with macros
basic: forward to renamed fn, with args preserved enabled: redirect to pr_debug, dev_dbg, with CATEGORY # format
this is where drm_debug_enabled() is avoided. prefix is prepended at compile-time, no category at runtime.
D. API[1] uses DRM_DBG_CAT_<CAT>s these already use (C), now they use (B) too, to get the correct token type for "basic" and "dyndbg" configs.
NOTES:
Code Review is expected to catch lack of correspondence between bit=>prefix definitions (the selector) and the prefixes used in the API[1] layer above pr_debug()
I've coded the search-prefixes/categories with a trailing space, which excludes any sub-categories added later. This convention protects any "drm:atomic:fail:" callsites from getting stomped on by `echo 0 > debug`. Other categories could differ, but we need some default.
Dyndbg requires that the prefix be in the compiled-in format string; run-time prefixing evades callsite selection by category.
pr_debug("%s: ...", __func__, ...) // not ideal
With "lineno X" in a query, its possible to enable single callsites, but it is tedious, and useless in a category context.
Unfortunately __func__ is not a macro, and cannot be catenated at preprocess/compile time.
pr_debug("Entry: ...") // +fml gives useful log-info pr_debug("Exit: ...") // hard to catch them all
But "func foo" added to query-command would work, should it be useful enough to justify extending the declarative interface.
--- v4+:
. use DEFINE_DYNAMIC_DEBUG_CATEGORIES in drm_print.c . s/DRM_DBG_CLASS_/DRM_DBG_CAT_/ - dont need another term . default=y in KBuild entry - per @DanVet . move some commit-log prose to dyndbg commit . add-prototyes to (param_get/set)_dyndbg . more wrinkles found by lkp@intel.com . relocate ratelimit chunk from elsewhere . add kernel doc
Signed-off-by: Jim Cromie jim.cromie@gmail.com --- drivers/gpu/drm/Kconfig | 13 ++++ drivers/gpu/drm/drm_print.c | 49 +++++++++---- include/drm/drm_print.h | 141 ++++++++++++++++++++++++++++-------- 3 files changed, 159 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 7ff89690a976..97e38d86fd27 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -57,6 +57,19 @@ config DRM_DEBUG_MM
If in doubt, say "N".
+config DRM_USE_DYNAMIC_DEBUG + bool "use dynamic debug to implement drm.debug" + default y + depends on DRM + depends on DYNAMIC_DEBUG || DYNAMIC_DEBUG_CORE + depends on JUMP_LABEL + help + The "basic" drm.debug facility does a lot of unlikely + bit-field tests at runtime; while cheap individually, the + cost accumulates. DYNAMIC_DEBUG patches pr_debug()s in/out + of the running kernel, so avoids those bit-test overheads, + and is therefore recommended. + config DRM_DEBUG_SELFTEST tristate "kselftests for DRM" depends on DRM diff --git a/drivers/gpu/drm/drm_print.c b/drivers/gpu/drm/drm_print.c index 111b932cf2a9..72b940a30779 100644 --- a/drivers/gpu/drm/drm_print.c +++ b/drivers/gpu/drm/drm_print.c @@ -28,6 +28,7 @@ #include <stdarg.h>
#include <linux/io.h> +#include <linux/module.h> #include <linux/moduleparam.h> #include <linux/seq_file.h> #include <linux/slab.h> @@ -43,16 +44,36 @@ unsigned int __drm_debug; EXPORT_SYMBOL(__drm_debug);
-MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug category.\n" -"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n" -"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n" -"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n" -"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n" -"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n" -"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n" -"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n" -"\t\tBit 8 (0x100) will enable DP messages (displayport code)"); +#define DRM_DEBUG_DESC \ +"Enable debug output, where each bit enables a debug category.\n" \ +"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n" \ +"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n" \ +"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n" \ +"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n" \ +"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n" \ +"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n" \ +"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n" \ +"\t\tBit 8 (0x100) will enable DP messages (displayport code)." + +#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG +#include <linux/dynamic_debug.h> +DEFINE_DYNAMIC_DEBUG_CATEGORIES(debug, __drm_debug, + DRM_DEBUG_DESC, + _DD_cat_(DRM_DBG_CAT_CORE), + _DD_cat_(DRM_DBG_CAT_DRIVER), + _DD_cat_(DRM_DBG_CAT_KMS), + _DD_cat_(DRM_DBG_CAT_PRIME), + _DD_cat_(DRM_DBG_CAT_ATOMIC), + _DD_cat_(DRM_DBG_CAT_VBL), + _DD_cat_(DRM_DBG_CAT_STATE), + _DD_cat_(DRM_DBG_CAT_LEASE), + _DD_cat_(DRM_DBG_CAT_DP), + _DD_cat_(DRM_DBG_CAT_DRMRES)); + +#else +MODULE_PARM_DESC(debug, DRM_DEBUG_DESC); module_param_named(debug, __drm_debug, int, 0600); +#endif
void __drm_puts_coredump(struct drm_printer *p, const char *str) { @@ -256,8 +277,8 @@ void drm_dev_printk(const struct device *dev, const char *level, } EXPORT_SYMBOL(drm_dev_printk);
-void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, - const char *format, ...) +void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category, + const char *format, ...) { struct va_format vaf; va_list args; @@ -278,9 +299,9 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
va_end(args); } -EXPORT_SYMBOL(drm_dev_dbg); +EXPORT_SYMBOL(__drm_dev_dbg);
-void __drm_dbg(enum drm_debug_category category, const char *format, ...) +void ___drm_dbg(enum drm_debug_category category, const char *format, ...) { struct va_format vaf; va_list args; @@ -297,7 +318,7 @@ void __drm_dbg(enum drm_debug_category category, const char *format, ...)
va_end(args); } -EXPORT_SYMBOL(__drm_dbg); +EXPORT_SYMBOL(___drm_dbg);
void __drm_err(const char *format, ...) { diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h index 15a089a87c22..aca56b456277 100644 --- a/include/drm/drm_print.h +++ b/include/drm/drm_print.h @@ -252,15 +252,15 @@ static inline struct drm_printer drm_err_printer(const char *prefix) /** * enum drm_debug_category - The DRM debug categories * - * Each of the DRM debug logging macros use a specific category, and the logging - * is filtered by the drm.debug module parameter. This enum specifies the values - * for the interface. + * The drm.debug logging API[1] has 10 enumerated categories of + * messages, issued by 3 families of macros: 10 drm_dbg_<CATs>, 8 + * DRM_DEBUG_<CATs>, and 3 DRM_DEV_DEBUG_<CATs>. * * Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except * DRM_DEBUG() logs to DRM_UT_CORE. * - * Enabling verbose debug messages is done through the drm.debug parameter, each - * category being enabled by a bit: + * Enabling categories of debug messages is done through the drm.debug + * parameter, each category being enabled by a bit: * * - drm.debug=0x1 will enable CORE messages * - drm.debug=0x2 will enable DRIVER messages @@ -319,6 +319,85 @@ enum drm_debug_category { DRM_UT_DRMRES = 0x200, };
+/** + * DOC: DRM_USE_DYNAMIC_DEBUG - using dyndbg in drm.debug + * + * In the "basic" drm.debug implementation outlined above, each time a + * drm-debug API[1] call is executed, drm_debug_enabled(cat) tests + * drm.debug vs cat before printing. + * + * DYNAMIC_DEBUG (aka: dyndbg) patches pr_debug()s in^out of the + * running kernel, so it can avoid drm_debug_enabled() and skip lots + * of unlikely bit tests. + * + * dyndbg has no concept of category, but we can prepend a + * class-prefix string: "drm:core: ", "drm:kms: ", "drm:driver: " etc, + * to pr_debug's format (at compile time). + * + * Then control the category + * `echo module drm format "^drm:core: " +p > control` + * `dynamic_debug_exec_queries("format '^drm:core: ' +p", "drm");` + * + * To do this for "basic" | "dyndbg", adaptation adds some macro indirection: + * + * 0. use dyndbg support to define the bits => prefixes map, attach callback. + * + * DYNDBG_BITMAP_DESC(debug, __drm_debug, + * "drm.debug - overview", + * { "drm:core:", "enable CORE debug messages" }, + * { "drm:kms:", "enable KMS debug messages" }, ...); + * + * 1. DRM_DBG_CAT_<CAT> + * + * This set of symbols replaces DRM_UT_<CAT> in the drm-debug API; it + * is either a copy of DRM_UT_<CAT>, or the class-prefix strings. + * + * 2. drm_dev_dbg & drm_debug are called by drm.debug API + * + * These are now macros, either forwarding to renamed functions, or + * prepending the class string to the format, and invoking pr_debug + * directly. Since the API is all macros, dyndbg remembers + * per-pr_debug: module,file,func,line,format and uses that to find + * and enable them. + */ +#if !defined(CONFIG_DRM_USE_DYNAMIC_DEBUG) + +#define __drm_dbg(cls, fmt, ...) \ + ___drm_dbg(cls, fmt, ##__VA_ARGS__) +#define drm_dev_dbg(dev, cls, fmt, ...) \ + __drm_dev_dbg(dev, cls, fmt, ##__VA_ARGS__) + +#define DRM_DBG_CAT_CORE DRM_UT_CORE +#define DRM_DBG_CAT_DRIVER DRM_UT_DRIVER +#define DRM_DBG_CAT_KMS DRM_UT_KMS +#define DRM_DBG_CAT_PRIME DRM_UT_PRIME +#define DRM_DBG_CAT_ATOMIC DRM_UT_ATOMIC +#define DRM_DBG_CAT_VBL DRM_UT_VBL +#define DRM_DBG_CAT_STATE DRM_UT_STATE +#define DRM_DBG_CAT_LEASE DRM_UT_LEASE +#define DRM_DBG_CAT_DP DRM_UT_DP +#define DRM_DBG_CAT_DRMRES DRM_UT_DRMRES + +#else /* !CONFIG_DRM_USE_DYNAMIC_DEBUG */ + +#define __drm_dbg(cls, fmt, ...) \ + pr_debug(cls # fmt, ##__VA_ARGS__) +#define drm_dev_dbg(dev, cls, fmt, ...) \ + dev_dbg(dev, cls # fmt, ##__VA_ARGS__) + +#define DRM_DBG_CAT_CORE "drm:core: " +#define DRM_DBG_CAT_DRIVER "drm:drvr: " +#define DRM_DBG_CAT_KMS "drm:kms: " +#define DRM_DBG_CAT_PRIME "drm:prime: " +#define DRM_DBG_CAT_ATOMIC "drm:atomic: " +#define DRM_DBG_CAT_VBL "drm:vbl: " +#define DRM_DBG_CAT_STATE "drm:state: " +#define DRM_DBG_CAT_LEASE "drm:lease: " +#define DRM_DBG_CAT_DP "drm:dp: " +#define DRM_DBG_CAT_DRMRES "drm:res " + +#endif /* !CONFIG_DRM_USE_DYNAMIC_DEBUG */ + static inline bool drm_debug_enabled(enum drm_debug_category category) { return unlikely(__drm_debug & category); @@ -334,8 +413,8 @@ __printf(3, 4) void drm_dev_printk(const struct device *dev, const char *level, const char *format, ...); __printf(3, 4) -void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, - const char *format, ...); +void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category, + const char *format, ...);
/** * DRM_DEV_ERROR() - Error output. @@ -383,7 +462,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG(dev, fmt, ...) \ - drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__) + drm_dev_dbg(dev, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__) /** * DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver * @@ -391,7 +470,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \ - drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + drm_dev_dbg(dev, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__) /** * DRM_DEV_DEBUG_KMS() - Debug output for modesetting code * @@ -399,7 +478,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, * @fmt: printf() like format string. */ #define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \ - drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__) + drm_dev_dbg(dev, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
/* * struct drm_device based logging @@ -443,25 +522,25 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
#define drm_dbg_core(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_CORE, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__) #define drm_dbg(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__) #define drm_dbg_kms(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_KMS, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__) #define drm_dbg_prime(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_PRIME, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__) #define drm_dbg_atomic(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__) #define drm_dbg_vbl(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_VBL, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__) #define drm_dbg_state(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_STATE, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_STATE, fmt, ##__VA_ARGS__) #define drm_dbg_lease(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_LEASE, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__) #define drm_dbg_dp(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DP, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DP, fmt, ##__VA_ARGS__) #define drm_dbg_drmres(drm, fmt, ...) \ - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRMRES, fmt, ##__VA_ARGS__) + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRMRES, fmt, ##__VA_ARGS__)
/* @@ -471,7 +550,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category, */
__printf(2, 3) -void __drm_dbg(enum drm_debug_category category, const char *format, ...); +void ___drm_dbg(enum drm_debug_category category, const char *format, ...); __printf(1, 2) void __drm_err(const char *format, ...);
@@ -500,29 +579,30 @@ void __drm_err(const char *format, ...); #define DRM_ERROR_RATELIMITED(fmt, ...) \ DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
+ #define DRM_DEBUG(fmt, ...) \ - __drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DRIVER(fmt, ...) \ - __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_KMS(fmt, ...) \ - __drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_PRIME(fmt, ...) \ - __drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_ATOMIC(fmt, ...) \ - __drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_VBL(fmt, ...) \ - __drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_LEASE(fmt, ...) \ - __drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__)
#define DRM_DEBUG_DP(fmt, ...) \ - __drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__) + __drm_dbg(DRM_DBG_CAT_DP, fmt, ## __VA_ARGS__)
#define __DRM_DEFINE_DBG_RATELIMITED(category, drm, fmt, ...) \ ({ \ @@ -530,7 +610,8 @@ void __drm_err(const char *format, ...); const struct drm_device *drm_ = (drm); \ \ if (drm_debug_enabled(DRM_UT_ ## category) && __ratelimit(&rs_)) \ - drm_dev_printk(drm_ ? drm_->dev : NULL, KERN_DEBUG, fmt, ## __VA_ARGS__); \ + drm_dev_dbg((drm_) ? (drm_)->dev : NULL, \ + DRM_DBG_CAT_ ## category, fmt, ##__VA_ARGS__); \ })
#define drm_dbg_kms_ratelimited(drm, fmt, ...) \