Add changes to support writeback module in the dpu_hw_ctl interface.
changes in v2: - keep only the wb specific changes to reset_intf_cfg - use cfg->intf / cfg->wb to identify intf or wb - use bit-wise OR for the wb bits while programming
Signed-off-by: Abhinav Kumar quic_abhinavk@quicinc.com --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 43 +++++++++++++++++++++++++++--- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 15 ++++++++++- 2 files changed, 53 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c index 524f024..495a9cd 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. +/* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. */
#include <linux/delay.h> @@ -23,10 +24,12 @@ #define CTL_SW_RESET 0x030 #define CTL_LAYER_EXTN_OFFSET 0x40 #define CTL_MERGE_3D_ACTIVE 0x0E4 +#define CTL_WB_ACTIVE 0x0EC #define CTL_INTF_ACTIVE 0x0F4 #define CTL_MERGE_3D_FLUSH 0x100 #define CTL_DSC_ACTIVE 0x0E8 #define CTL_DSC_FLUSH 0x104 +#define CTL_WB_FLUSH 0x108 #define CTL_INTF_FLUSH 0x110 #define CTL_INTF_MASTER 0x134 #define CTL_FETCH_PIPE_ACTIVE 0x0FC @@ -38,6 +41,7 @@ #define MERGE_3D_IDX 23 #define DSC_IDX 22 #define INTF_IDX 31 +#define WB_IDX 16 #define CTL_INVALID_BIT 0xffff #define CTL_DEFAULT_GROUP_ID 0xf
@@ -135,6 +139,9 @@ static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx) if (ctx->pending_flush_mask & BIT(INTF_IDX)) DPU_REG_WRITE(&ctx->hw, CTL_INTF_FLUSH, ctx->pending_intf_flush_mask); + if (ctx->pending_flush_mask & BIT(WB_IDX)) + DPU_REG_WRITE(&ctx->hw, CTL_WB_FLUSH, + ctx->pending_wb_flush_mask);
DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, ctx->pending_flush_mask); } @@ -255,6 +262,13 @@ static void dpu_hw_ctl_update_pending_flush_intf(struct dpu_hw_ctl *ctx, } }
+static void dpu_hw_ctl_update_pending_flush_wb_v1(struct dpu_hw_ctl *ctx, + enum dpu_wb wb) +{ + ctx->pending_wb_flush_mask |= BIT(wb - WB_0); + ctx->pending_flush_mask |= BIT(WB_IDX); +} + static void dpu_hw_ctl_update_pending_flush_intf_v1(struct dpu_hw_ctl *ctx, enum dpu_intf intf) { @@ -504,6 +518,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx, { struct dpu_hw_blk_reg_map *c = &ctx->hw; u32 intf_active = 0; + u32 wb_active = 0; u32 mode_sel = 0;
/* CTL_TOP[31:28] carries group_id to collate CTL paths @@ -519,11 +534,20 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx, if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD) mode_sel |= BIT(17);
- intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE); - intf_active |= BIT(cfg->intf - INTF_0); + if (cfg->intf) { + intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE); + intf_active |= BIT(cfg->intf - INTF_0); + } + + if (cfg->wb) { + wb_active = DPU_REG_READ(c, CTL_WB_ACTIVE); + wb_active |= BIT(cfg->wb - WB_0); + }
DPU_REG_WRITE(c, CTL_TOP, mode_sel); DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active); + DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active); + if (cfg->merge_3d) DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, BIT(cfg->merge_3d - MERGE_3D_0)); @@ -546,6 +570,9 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx, intf_cfg |= (cfg->mode_3d - 0x1) << 20; }
+ if (cfg->wb) + intf_cfg |= (cfg->wb & 0x3) + 2; + switch (cfg->intf_mode_sel) { case DPU_CTL_MODE_SEL_VID: intf_cfg &= ~BIT(17); @@ -568,12 +595,13 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx, { struct dpu_hw_blk_reg_map *c = &ctx->hw; u32 intf_active = 0; + u32 wb_active = 0; u32 merge3d_active = 0;
/* * This API resets each portion of the CTL path namely, * clearing the sspps staged on the lm, merge_3d block, - * interfaces etc to ensure clean teardown of the pipeline. + * interfaces , writeback etc to ensure clean teardown of the pipeline. * This will be used for writeback to begin with to have a * proper teardown of the writeback session but upon further * validation, this can be extended to all interfaces. @@ -592,6 +620,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx, intf_active &= ~BIT(cfg->intf - INTF_0); DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active); } + + if (cfg->wb) { + wb_active = DPU_REG_READ(c, CTL_WB_ACTIVE); + wb_active &= ~BIT(cfg->wb - WB_0); + DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active); + } }
static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx, @@ -622,6 +656,7 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops, dpu_hw_ctl_update_pending_flush_intf_v1; ops->update_pending_flush_merge_3d = dpu_hw_ctl_update_pending_flush_merge_3d_v1; + ops->update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb_v1; } else { ops->trigger_flush = dpu_hw_ctl_trigger_flush; ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h index c61a8fd..df8f8e9 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. +/* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. */
#ifndef _DPU_HW_CTL_H @@ -44,6 +45,7 @@ struct dpu_hw_stage_cfg { */ struct dpu_hw_intf_cfg { enum dpu_intf intf; + enum dpu_wb wb; enum dpu_3d_blend_mode mode_3d; enum dpu_merge_3d merge_3d; enum dpu_ctl_mode_sel intf_mode_sel; @@ -102,6 +104,15 @@ struct dpu_hw_ctl_ops { u32 flushbits);
/** + * OR in the given flushbits to the cached pending_(wb_)flush_mask + * No effect on hardware + * @ctx : ctl path ctx pointer + * @blk : writeback block index + */ + void (*update_pending_flush_wb)(struct dpu_hw_ctl *ctx, + enum dpu_wb blk); + + /** * OR in the given flushbits to the cached pending_(intf_)flush_mask * No effect on hardware * @ctx : ctl path ctx pointer @@ -199,6 +210,7 @@ struct dpu_hw_ctl_ops { * @mixer_hw_caps: mixer hardware capabilities * @pending_flush_mask: storage for pending ctl_flush managed via ops * @pending_intf_flush_mask: pending INTF flush + * @pending_wb_flush_mask: pending WB flush * @ops: operation list */ struct dpu_hw_ctl { @@ -212,6 +224,7 @@ struct dpu_hw_ctl { const struct dpu_lm_cfg *mixer_hw_caps; u32 pending_flush_mask; u32 pending_intf_flush_mask; + u32 pending_wb_flush_mask; u32 pending_merge_3d_flush_mask;
/* ops */