Hi Noralf,
On Thu, 22 Jul 2021 at 15:03, Noralf Trønnes noralf@tronnes.org wrote:
Den 22.07.2021 04.07, skrev Dillon Min:
Hi Noralf
Thanks for your time to review my patch.
On Thu, 22 Jul 2021 at 01:42, Noralf Trønnes noralf@tronnes.org wrote:
Den 21.07.2021 09.41, skrev dillon.minfei@gmail.com:
From: Dillon Min dillon.minfei@gmail.com
This driver combine tiny/ili9341.c mipi_dbi_interface driver with mipi_dpi_interface driver, can support ili9341 with serial mode or parallel rgb interface mode by register configuration.
Cc: Linus Walleij linus.walleij@linaro.org Signed-off-by: Dillon Min dillon.minfei@gmail.com
+static const struct of_device_id ili9341_of_match[] = {
{.compatible = "st,sf-tc240t-9370-t",.data = &ili9341_stm32f429_disco_data,},{/* porting from tiny/ili9341.c* for original mipi dbi compitable*/.compatible = "adafruit,yx240qv29",I don't understand this, now there will be 2 drivers that support the same display?
There is no reason to create two drivers to support the same display.
To support only-dbi and dbi+dpi panel at drm/panel or drm/tiny both fine with me.
AFAICT drm/tiny/ili9341.c is just copied into this driver, is the plan to remove the tiny/ driver? If so I couldn't see this mentioned anywhere.
Yes, I'd like to merge the code from drm/tiny/ili9341.c to this driver (to make a single driver to support different bus).
I have two purpose to extend the feature drm/tiny/ili9341.c
- keep compatible = "adafruit,yx240qv29", add bus mode dts bindings (panel_bus) to define the interface which host wants to use. such as
panel_bus="dbi" or "rgb" or "i80" for this case, i will add dpi code to drm/tiny/ili9341.c.
- merge tiny/ili9341.c to this driver,remove drm/tiny/ili9341.c, add
new dts compatible string to support other interfaces. just like what i'm doing now.
I have no idea about your plan on drm/tiny drivers, actually some of these panels under the diny folder can support both dbi and dbi+dpi (much faster, need more pins). no doubt the requirement to support dpi is always there.
What is your preference?
I have no plans for tiny/, it's just a place to put tiny DRM drivers of all sorts.
Thanks for clarifying.
Whether or not to have "full" DRM drivers in panel/ is up to Sam and Laurent I guess, currently there's only drm_panel drivers in there. I have no objections to doing that though.
I just wanted to make sure we don't have 2 drivers for the same display.
Sure, agree with you, sorry for not mentioning it in the cover letter. I'm waiting for Sam and Laurent's feedback, then submit v3 after that.
Best regards. Dillon
Noralf.
Thanks & Regards Dillon
Noralf.
.data = NULL,},+}; +MODULE_DEVICE_TABLE(of, ili9341_of_match);