On 05/22/2015 07:46 PM, Hai Li wrote:
DSI video mode engine can only take active-high sync signals. This change prevents MDP5 sending active-low sync signals to DSI in any case.
Signed-off-by: Hai Li hali@codeaurora.org
Tested-by: Archit Taneja architt@codeaurora.org
drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c index 53bb1f7..2e98ce0 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c @@ -144,10 +144,14 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder, mode->type, mode->flags);
ctrl_pol = 0;
- if (mode->flags & DRM_MODE_FLAG_NHSYNC)
ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW;- if (mode->flags & DRM_MODE_FLAG_NVSYNC)
ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW;
/* DSI controller cannot handle active-low sync signals. */
if (mdp5_encoder->intf.type != INTF_DSI) {
if (mode->flags & DRM_MODE_FLAG_NHSYNC)ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW;if (mode->flags & DRM_MODE_FLAG_NVSYNC)ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW;} /* probably need to get DATA_EN polarity from panel.. */
dtv_hsync_skew = 0; /* get this from panel? */