So far, PCI option registers were initialized as part of modesetting, which is late in the process. As these registers control fundamental operation, they should be set early.
The patch moves the PCI option handling into device register setup, before even the device MMIO memory is being mapped. No functional changes made.
Moving the PCI code next to the device-register setup also allows to remove the has_sdram field from struct mga_device. The state is now local to the init helper.
Signed-off-by: Thomas Zimmermann tzimmermann@suse.de --- drivers/gpu/drm/mgag200/mgag200_drv.c | 32 +++++++++++++++++++- drivers/gpu/drm/mgag200/mgag200_drv.h | 1 - drivers/gpu/drm/mgag200/mgag200_mode.c | 41 -------------------------- 3 files changed, 31 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c index e50c682c4702..3dbb00045c24 100644 --- a/drivers/gpu/drm/mgag200/mgag200_drv.c +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c @@ -60,8 +60,38 @@ static bool mgag200_has_sgram(struct mga_device *mdev) static int mgag200_regs_init(struct mga_device *mdev) { struct drm_device *dev = &mdev->base; + u32 option, option2; + + switch (mdev->type) { + case G200_SE_A: + case G200_SE_B: + if (mgag200_has_sgram(mdev)) + option |= PCI_MGA_OPTION_HARDPWMSK; + option2 = 0x00008000; + break; + case G200_WB: + case G200_EW3: + option = 0x41049120; + option2 = 0x0000b000; + break; + case G200_EV: + option = 0x00000120; + option2 = 0x0000b000; + break; + case G200_EH: + case G200_EH3: + option = 0x00000120; + option2 = 0x0000b000; + break; + default: + option = 0; + option2 = 0; + }
- mdev->has_sdram = !mgag200_has_sgram(mdev); + if (option) + pci_write_config_dword(dev->pdev, PCI_MGA_OPTION, option); + if (option2) + pci_write_config_dword(dev->pdev, PCI_MGA_OPTION2, option2);
/* BAR 1 contains registers */ mdev->rmmio_base = pci_resource_start(dev->pdev, 1); diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h index 3817520bfefc..819c03cc626b 100644 --- a/drivers/gpu/drm/mgag200/mgag200_drv.h +++ b/drivers/gpu/drm/mgag200/mgag200_drv.h @@ -161,7 +161,6 @@ struct mga_device { size_t vram_fb_available;
enum mga_type type; - int has_sdram;
int bpp_shifts[4];
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index e0d037a7413c..3aa078e69a5a 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -9,7 +9,6 @@ */
#include <linux/delay.h> -#include <linux/pci.h>
#include <drm/drm_atomic_helper.h> #include <drm/drm_atomic_state_helper.h> @@ -877,45 +876,6 @@ static void mgag200_set_startadd(struct mga_device *mdev, WREG_ECRT(0x00, crtcext0); }
-static void mgag200_set_pci_regs(struct mga_device *mdev) -{ - uint32_t option = 0, option2 = 0; - struct drm_device *dev = &mdev->base; - - switch (mdev->type) { - case G200_SE_A: - case G200_SE_B: - if (mdev->has_sdram) - option = 0x40049120; - else - option = 0x4004d120; - option2 = 0x00008000; - break; - case G200_WB: - case G200_EW3: - option = 0x41049120; - option2 = 0x0000b000; - break; - case G200_EV: - option = 0x00000120; - option2 = 0x0000b000; - break; - case G200_EH: - case G200_EH3: - option = 0x00000120; - option2 = 0x0000b000; - break; - case G200_ER: - break; - } - - if (option) - pci_write_config_dword(dev->pdev, PCI_MGA_OPTION, option); - - if (option2) - pci_write_config_dword(dev->pdev, PCI_MGA_OPTION2, option2); -} - static void mgag200_set_dac_regs(struct mga_device *mdev) { size_t i; @@ -988,7 +948,6 @@ static void mgag200_init_regs(struct mga_device *mdev) { u8 crtc11, crtcext3, crtcext4, misc;
- mgag200_set_pci_regs(mdev); mgag200_set_dac_regs(mdev);
WREG_SEQ(2, 0x0f);