The Cadence D-PHY bindings was defined as part of the DSI block so far. However, since it's now going to be a separate driver, we need to move the binding to a file of its own.
Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Maxime Ripard maxime.ripard@bootlin.com --- Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt | 21 +------- Documentation/devicetree/bindings/phy/cdns,dphy.txt | 20 +++++++- 2 files changed, 20 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt index f5725bb6c61c..525a4bfd8634 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt @@ -31,28 +31,7 @@ Required subnodes: - one subnode per DSI device connected on the DSI bus. Each DSI device should contain a reg property encoding its virtual channel.
-Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - - Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; - dsi0: dsi@fd0c0000 { compatible = "cdns,dsi"; reg = <0x0 0xfd0c0000 0x0 0x1000>; diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt new file mode 100644 index 000000000000..1095bc4e72d9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt @@ -0,0 +1,20 @@ +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + };