The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver.
This change adds support for the touch interface.
Signed-off-by: Alex Gonzalez alex.gonzalez@digi.com --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index f6e6b2cf780b..3749fdda3611 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -117,6 +117,19 @@ }; };
+&i2c1 { + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_touch>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat0_17 @@ -290,6 +303,12 @@ >; };
+ pinctrl_goodix_touch: goodixgrp{ + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020 + >; + }; + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79