On Tue, Apr 19, 2022 at 09:56:25PM -0300, Fabio Estevam wrote:
From: Heiko Schocher hs@denx.de
Add Startek KD070WVFPA043-C069A 7" TFT LCD panel support.
Signed-off-by: Heiko Schocher hs@denx.de Signed-off-by: Fabio Estevam festevam@denx.de
drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index a34f4198a534..ca8cd017821d 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -3311,6 +3311,36 @@ static const struct panel_desc tsd_tst043015cmhx = { .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE, };
+static const struct display_timing startek_kd070wvfpa_mode = {
- .pixelclock = { 25200000, 27200000, 30500000 },
- .hactive = { 800, 800, 800 },
- .hfront_porch = { 19, 44, 115 },
- .hback_porch = { 5, 16, 101 },
- .hsync_len = { 1, 2, 100 },
- .vactive = { 480, 480, 480 },
- .vfront_porch = { 5, 43, 67 },
- .vback_porch = { 5, 5, 67 },
- .vsync_len = { 1, 2, 66 },
+};
+static const struct panel_desc startek_kd070wvfpa = {
- .timings = &startek_kd070wvfpa_mode,
- .num_timings = 1,
- .bpc = 8,
- .size = {
.width = 152,.height = 91,- },
- .delay = {
.prepare = 20,.enable = 200,.disable = 200,- },
- .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
- .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
Please fix so order of startek_kd070wvfpa is the same order in platform_of_match.
startek_kd070wvfpa is after tsd_tst043015cmhx above, but before tsd_tst043015cmhx below.
Sam
static const struct drm_display_mode tfc_s9700rtwv43tr_01b_mode = { .clock = 30000, .hdisplay = 800, @@ -3990,6 +4020,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "starry,kr070pe2t", .data = &starry_kr070pe2t,
- }, {
.compatible = "startek,kd070wvfpa",.data = &startek_kd070wvfpa,-- 2.25.1