Replace macro debug by pr_error, pr_warn or pr_info.
Signed-off-by: yannick fertre yannick.fertre@st.com --- drivers/video/stm32/stm32_ltdc.c | 62 ++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c index bd9c0de..e95f35c 100644 --- a/drivers/video/stm32/stm32_ltdc.c +++ b/drivers/video/stm32/stm32_ltdc.c @@ -176,13 +176,13 @@ static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp) case VIDEO_BPP2: case VIDEO_BPP4: default: - debug("%s: warning %dbpp not supported yet, %dbpp instead\n", - __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16)); + pr_warn("%s: warning %dbpp not supported yet, %dbpp instead\n", + __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16)); pf = PF_RGB565; break; }
- debug("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf); + pr_info("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf);
return (u32)pf; } @@ -249,7 +249,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
/* Signal polarities */ val = 0; - debug("%s: timing->flags 0x%08x\n", __func__, timings->flags); + pr_info("%s: timing->flags 0x%08x\n", __func__, timings->flags); if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH) val |= GCR_HSPOL; if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH) @@ -343,26 +343,26 @@ static int stm32_ltdc_probe(struct udevice *dev)
priv->regs = (void *)dev_read_addr(dev); if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) { - debug("%s: ltdc dt register address error\n", __func__); + pr_err("%s: ltdc dt register address error\n", __func__); return -EINVAL; }
ret = clk_get_by_index(dev, 0, &pclk); if (ret) { - debug("%s: peripheral clock get error %d\n", __func__, ret); + pr_err("%s: peripheral clock get error %d\n", __func__, ret); return ret; }
ret = clk_enable(&pclk); if (ret) { - debug("%s: peripheral clock enable error %d\n", - __func__, ret); + pr_err("%s: peripheral clock enable error %d\n", + __func__, ret); return ret; }
ret = reset_get_by_index(dev, 0, &rst); if (ret) { - debug("%s: missing ltdc hardware reset\n", __func__); + pr_err("%s: missing ltdc hardware reset\n", __func__); return -ENODEV; }
@@ -372,41 +372,40 @@ static int stm32_ltdc_probe(struct udevice *dev) #ifdef CONFIG_VIDEO_BRIDGE ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge); if (ret) { - debug("%s: No video bridge, or no backlight on bridge\n", - __func__); + pr_info("%s: No video bridge, or no backlight on bridge\n", + __func__); }
if (bridge) { ret = video_bridge_attach(bridge); if (ret) { - debug("%s: fail to attach bridge\n", __func__); + pr_err("%s: fail to attach bridge\n", __func__); return ret; } } #endif ret = uclass_first_device(UCLASS_PANEL, &panel); if (ret) { - debug("%s: panel device error %d\n", __func__, ret); + pr_err("%s: panel device error %d\n", __func__, ret); return ret; }
ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(panel), 0, &timings); if (ret) { - debug("%s: decode display timing error %d\n", - __func__, ret); + pr_err("%s: decode display timing error %d\n", __func__, ret); return ret; }
rate = clk_set_rate(&pclk, timings.pixelclock.typ); if (rate < 0) { - debug("%s: fail to set pixel clock %d hz %d hz\n", - __func__, timings.pixelclock.typ, rate); + pr_err("%s: fail to set pixel clock %d hz %d hz\n", + __func__, timings.pixelclock.typ, rate); return rate; }
- debug("%s: Set pixel clock req %d hz get %d hz\n", __func__, - timings.pixelclock.typ, rate); + pr_info("%s: Set pixel clock req %d hz get %d hz\n", __func__, + timings.pixelclock.typ, rate);
/* TODO Below parameters are hard-coded for the moment... */ priv->l2bpp = VIDEO_BPP16; @@ -417,12 +416,12 @@ static int stm32_ltdc_probe(struct udevice *dev) priv->crop_h = timings.vactive.typ; priv->alpha = 0xFF;
- debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__, - timings.hactive.typ, timings.vactive.typ, - VNBITS(priv->l2bpp), uc_plat->base); - debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__, - priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, - priv->bg_col_argb, priv->alpha); + pr_info("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__, + timings.hactive.typ, timings.vactive.typ, + VNBITS(priv->l2bpp), uc_plat->base); + pr_info("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__, + priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, + priv->bg_col_argb, priv->alpha);
/* Configure & start LTDC */ stm32_ltdc_set_mode(priv, &timings); @@ -437,22 +436,22 @@ static int stm32_ltdc_probe(struct udevice *dev) if (bridge) { ret = video_bridge_set_backlight(bridge, 80); if (ret) { - debug("%s: fail to set backlight\n", __func__); + pr_err("%s: fail to set backlight\n", __func__); return ret; } } else { ret = panel_enable_backlight(panel); if (ret) { - debug("%s: panel %s enable backlight error %d\n", - __func__, panel->name, ret); + pr_err("%s: panel %s enable backlight error %d\n", + __func__, panel->name, ret); return ret; } } #else ret = panel_enable_backlight(panel); if (ret) { - debug("%s: panel %s enable backlight error %d\n", - __func__, panel->name, ret); + pr_err("%s: panel %s enable backlight error %d\n", + __func__, panel->name, ret); return ret; } #endif @@ -468,7 +467,8 @@ static int stm32_ltdc_bind(struct udevice *dev) uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES * CONFIG_VIDEO_STM32_MAX_YRES * (CONFIG_VIDEO_STM32_MAX_BPP >> 3); - debug("%s: frame buffer max size %d bytes\n", __func__, uc_plat->size); + pr_info("%s: frame buffer max size %d bytes\n", __func__, + uc_plat->size);
return 0; }