Currently the DSI PHY timings are hard-coded for a specific panel for the 10nm PHY.
Replace this with the auto PHY timing calculator which can calculate the PHY timings for any panel.
Changes in v4: - None
Changes in v3: - None
Changes in v2: - None
Reviewed-by: Sean Paul seanpaul@chromium.org Reviewed-by: Archit Taneja architt@codeaurora.org Signed-off-by: Abhinav Kumar abhinavk@codeaurora.org --- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 109 +++++++++++++++++++++++++++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 2 + drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 28 -------- 3 files changed, 111 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 8e9d5c2..9a9fa0c 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -265,6 +265,115 @@ int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, return 0; }
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, + struct msm_dsi_phy_clk_request *clk_req) +{ + const unsigned long bit_rate = clk_req->bitclk_rate; + const unsigned long esc_rate = clk_req->escclk_rate; + s32 ui, ui_x8, lpx; + s32 tmax, tmin; + s32 pcnt0 = 50; + s32 pcnt1 = 50; + s32 pcnt2 = 10; + s32 pcnt3 = 30; + s32 pcnt4 = 10; + s32 pcnt5 = 2; + s32 coeff = 1000; /* Precision, should avoid overflow */ + s32 hb_en, hb_en_ckln; + s32 temp; + + if (!bit_rate || !esc_rate) + return -EINVAL; + + timing->hs_halfbyte_en = 0; + hb_en = 0; + timing->hs_halfbyte_en_ckln = 0; + hb_en_ckln = 0; + + ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); + ui_x8 = ui << 3; + lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000); + + temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); + tmin = max_t(s32, temp, 0); + temp = (95 * coeff) / ui_x8; + tmax = max_t(s32, temp, 0); + timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); + + temp = 300 * coeff - (timing->clk_prepare << 3) * ui; + tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; + tmax = (tmin > 255) ? 511 : 255; + timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); + + tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); + temp = 105 * coeff + 12 * ui - 20 * coeff; + tmax = (temp + 3 * ui) / ui_x8; + timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); + + temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); + tmin = max_t(s32, temp, 0); + temp = (85 * coeff + 6 * ui) / ui_x8; + tmax = max_t(s32, temp, 0); + timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); + + temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; + tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; + tmax = 255; + timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); + + tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; + temp = 105 * coeff + 12 * ui - 20 * coeff; + tmax = (temp / ui_x8) - 1; + timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); + + temp = 50 * coeff + ((hb_en << 2) - 8) * ui; + timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); + + tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; + tmax = 255; + timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); + + temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; + timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); + + temp = 60 * coeff + 52 * ui - 43 * ui; + tmin = DIV_ROUND_UP(temp, ui_x8) - 1; + tmax = 63; + timing->shared_timings.clk_post = + linear_inter(tmax, tmin, pcnt2, 0, false); + + temp = 8 * ui + (timing->clk_prepare << 3) * ui; + temp += (((timing->clk_zero + 3) << 3) + 11) * ui; + temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : + (((timing->hs_rqst_ckln << 3) + 8) * ui); + tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; + tmax = 63; + if (tmin > tmax) { + temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); + timing->shared_timings.clk_pre = temp >> 1; + timing->shared_timings.clk_pre_inc_by_2 = 1; + } else { + timing->shared_timings.clk_pre = + linear_inter(tmax, tmin, pcnt2, 0, false); + timing->shared_timings.clk_pre_inc_by_2 = 0; + } + + timing->ta_go = 3; + timing->ta_sure = 0; + timing->ta_get = 4; + + DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", + timing->shared_timings.clk_pre, timing->shared_timings.clk_post, + timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, + timing->clk_trail, timing->clk_prepare, timing->hs_exit, + timing->hs_zero, timing->hs_prepare, timing->hs_trail, + timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, + timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, + timing->hs_prep_dly_ckln); + + return 0; +} + void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg, u32 bit_mask) { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h index c56268c..a24ab80 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h @@ -101,6 +101,8 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing, struct msm_dsi_phy_clk_request *clk_req); int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, struct msm_dsi_phy_clk_request *clk_req); +int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, + struct msm_dsi_phy_clk_request *clk_req); void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg, u32 bit_mask); int msm_dsi_phy_init_common(struct msm_dsi_phy *phy); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index 0af951a..b3fffc8 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -79,34 +79,6 @@ static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy) dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04); }
-static int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, - struct msm_dsi_phy_clk_request *clk_req) -{ - /* - * TODO: These params need to be computed, they're currently hardcoded - * for a 1440x2560@60Hz panel with a byteclk of 100.618 Mhz, and a - * default escape clock of 19.2 Mhz. - */ - - timing->hs_halfbyte_en = 0; - timing->clk_zero = 0x1c; - timing->clk_prepare = 0x07; - timing->clk_trail = 0x07; - timing->hs_exit = 0x23; - timing->hs_zero = 0x21; - timing->hs_prepare = 0x07; - timing->hs_trail = 0x07; - timing->hs_rqst = 0x05; - timing->ta_sure = 0x00; - timing->ta_go = 0x03; - timing->ta_get = 0x04; - - timing->shared_timings.clk_pre = 0x2d; - timing->shared_timings.clk_post = 0x0d; - - return 0; -} - static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id, struct msm_dsi_phy_clk_request *clk_req) {