The TRULY TFT480800-16-E panel is driven by the Himax HX8369A driver IC. The driver IC supports several display/control interface modes, including the MIPI DSI video mode and command mode.
Signed-off-by: Liu Ying Ying.Liu@freescale.com --- v4->v5: * Replace the bs[3:0]-gpios properties with the bs-gpios property. This addresses Andrzej Hajda's comment.
v3->v4: * None.
v2->v3: * None.
v1->v2: * To address Thierry Reding's comments, remove several unnecessary properties as they can be implied by the compatible string. * Fix the compatible string. * Remove the display-timings node from the panel node as it can be implied by the compatible string as well. * Remove the status property as it is unneeded.
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index baf2f00..4e3a666 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -482,6 +482,13 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; + + pinctrl_mipi_panel: mipipanelgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + >; + }; };
gpio_leds { @@ -518,6 +525,19 @@ }; };
+&mipi_dsi { + status = "okay"; + + panel { + compatible = "truly,tft480800-16-e-dsi"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_panel>; + reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + bs-gpios = <0>, <0>, <&gpio6 14 GPIO_ACTIVE_HIGH>, <0>; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>;