Hi Adam.
Good with even more panels. But for new bindings please use meta-schema (.yaml) format. This is what we use for new bindings as it allows better validation.
Sam
On Tue, Sep 17, 2019 at 11:12:12AM -0500, Adam Ford wrote:
This patch adds documentation of device tree bindings for the WVGA panel Logic PD Type 28 display.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.txt b/Documentation/devicetree/bindings/display/panel/logicpd,type28.txt new file mode 100644 index 000000000000..829fc5210e06 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.txt @@ -0,0 +1,26 @@ +Logic PD Type 28 4.3" WQVGA TFT LCD panel
+This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory.
+Required properties: +- compatible: should be "logicpd,type28"
+Optional properties: +- power-supply: regulator to provide the supply voltage +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel
Is it correct that these are optional for the descrivbed panel?
+Optional nodes: +- Video port for RGB input.
+Example:
- lcd0: display {
compatible = "logicpd,type28";enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;port {lcd_in: endpoint {remote-endpoint = <&dpi_out>;};};- };
-- 2.17.1