On Thu, 2019-02-28 at 16:09 -0500, Sean Paul wrote:

From: Sean Paul seanpaul@chromium.org

This patch adds a new drm helper library to help drivers implement PSR. Drivers choosing to use it will register connectors with PSR-capable displays connected and will receive callbacks when it's time to enter or exit PSR.

This helpers should target connector not the entire driver, a modification in any sink would cause a PSR exit in all PSR panels.

Also do atomic commit in drm_psr_helper_flush() that is called from another atomic commit sounds wrong. During the atomic checks it should probably just set enable and active states of drm_crtc_state and the CRTC would be active when committing changes.

In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will save the current atomic state and issue a new state which has the PSR-enabled pipes turned off. On the next update, the drm core will poke the PSR helpers to restore the saved state to the driver before servicing said update.

From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'psr_transition' state in connector_state and keep the panel turned on when in .disable(), while everything else will cycle off as normal. If drivers want more control, they can use the psr_transition state to enter a low-power state to minimize PSR exit time.

While this carries the PSR moniker, it is not specific to the DisplayPort technology. This can be used for power savings with other types of self refresh, such as MIPI command mode.

Cc: Zain Wang wzz@rock-chips.com Cc: Tomasz Figa tfiga@chromium.org Signed-off-by: Sean Paul seanpaul@chromium.org

---

Documentation/gpu/drm-kms-helpers.rst | 9 + drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic_helper.c | 34 +++ drivers/gpu/drm/drm_atomic_uapi.c | 5 + drivers/gpu/drm/drm_fb_helper.c | 9 + drivers/gpu/drm/drm_framebuffer.c | 18 ++ drivers/gpu/drm/drm_psr_helper.c | 343 ++++++++++++++++++++++++++ include/drm/drm_connector.h | 22 ++ include/drm/drm_crtc.h | 11 + include/drm/drm_mode_config.h | 6 + include/drm/drm_psr_helper.h | 24 ++ 11 files changed, 482 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/drm_psr_helper.c create mode 100644 include/drm/drm_psr_helper.h

diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 17ca7f8bf3d3..d218a113bd52 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -107,6 +107,15 @@ fbdev Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c :export:

+Panel Self Refresh Helper Reference +===================================

+.. kernel-doc:: drivers/gpu/drm/drm_psr_helper.c

• :doc: overview

+.. kernel-doc:: drivers/gpu/drm/drm_psr_helper.c

• :export:

Framebuffer CMA Helper Functions Reference

diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 1ac55c65eac0..bff80fb946c7 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -19,7 +19,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm_plane.o drm_color_mgmt.o drm_print.o \ drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \ drm_syncobj.o drm_lease.o drm_writeback.o drm_client.o \

• drm_atomic_uapi.o
  

• drm_atomic_uapi.o drm_psr_helper.o
  
  

drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o drm-$(CONFIG_DRM_VM) += drm_vm.o diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index c53ecbd9abdd..f5284d55f170 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -30,6 +30,7 @@ #include <drm/drm_atomic_uapi.h> #include <drm/drm_plane_helper.h> #include <drm/drm_atomic_helper.h> +#include <drm/drm_psr_helper.h> #include <drm/drm_writeback.h> #include <drm/drm_damage_helper.h> #include <linux/dma-fence.h> @@ -2746,6 +2747,10 @@ int drm_atomic_helper_update_plane(struct drm_plane *plane, struct drm_plane_state *plane_state; int ret = 0;

• ret = drm_psr_helper_flush(plane->dev, ctx);
• if (ret)

• return ret;
  

• state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM;

@@ -2797,6 +2802,10 @@ int drm_atomic_helper_disable_plane(struct drm_plane *plane, struct drm_plane_state *plane_state; int ret = 0;

• ret = drm_psr_helper_flush(plane->dev, ctx);
• if (ret)

• return ret;
  

• state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM;

@@ -2934,11 +2943,16 @@ int drm_atomic_helper_set_config(struct drm_mode_set *set, struct drm_crtc *crtc = set->crtc; int ret = 0;

• ret = drm_psr_helper_flush(crtc->dev, ctx);

• if (ret)

• return ret;
  

• state = drm_atomic_state_alloc(crtc->dev); if (!state) return -ENOMEM;

  state->acquire_ctx = ctx;

• ret = __drm_atomic_helper_set_config(set, state); if (ret != 0) goto fail;

@@ -3139,6 +3153,10 @@ void drm_atomic_helper_shutdown(struct drm_device *dev)

DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret);

• ret = drm_psr_helper_flush(dev, &ctx);
• if (ret)

• DRM_ERROR("PSR flush during shutdown failed with %i\n",
  

ret);

• ret = __drm_atomic_helper_disable_all(dev, &ctx, true); if (ret) DRM_ERROR("Disabling all crtc's during unload failed

with %i\n", ret); @@ -3271,6 +3289,10 @@ struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev)

DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err);

• err = drm_psr_helper_flush(dev, &ctx);
• if (err)

• goto unlock;
  

• state = drm_atomic_helper_duplicate_state(dev, &ctx); if (IS_ERR(state)) goto unlock;

@@ -3436,6 +3458,10 @@ int drm_atomic_helper_page_flip(struct drm_crtc *crtc, struct drm_atomic_state *state; int ret = 0;

• ret = drm_psr_helper_flush(crtc->dev, ctx);
• if (ret)

• return ret;
  

• state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM;

@@ -3481,6 +3507,10 @@ int drm_atomic_helper_page_flip_target(struct drm_crtc *crtc, struct drm_crtc_state *crtc_state; int ret = 0;

• ret = drm_psr_helper_flush(plane->dev, ctx);
• if (ret)

• return ret;
  

• state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM;

@@ -3532,6 +3562,10 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, int i, ret = 0; bool replaced;

• ret = drm_psr_helper_flush(dev, ctx);
• if (ret)

• return ret;
  

• state = drm_atomic_state_alloc(crtc->dev); if (!state) return -ENOMEM;

diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c index 4eb81f10bc54..21d7771d6ec7 100644 --- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -29,6 +29,7 @@ #include <drm/drm_atomic_uapi.h> #include <drm/drm_atomic.h> #include <drm/drm_print.h> +#include <drm/drm_psr_helper.h> #include <drm/drm_drv.h> #include <drm/drm_writeback.h> #include <drm/drm_vblank.h> @@ -1314,6 +1315,10 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, fence_state = NULL; num_fences = 0;

• ret = drm_psr_helper_flush(dev, state->acquire_ctx);
• if (ret)

• goto out;
  

• for (i = 0; i < arg->count_objs; i++) { uint32_t obj_id, count_props; struct drm_mode_object *obj;

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 04d23cb430bf..a56ae2acda90 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -41,6 +41,7 @@ #include <drm/drm_crtc_helper.h> #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> +#include <drm/drm_psr_helper.h>

#include "drm_crtc_internal.h" #include "drm_crtc_helper_internal.h" @@ -406,6 +407,10 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ

state->acquire_ctx = &ctx; retry:

• ret = drm_psr_helper_flush(dev, state->acquire_ctx);
• if (ret)

• goto out_state;
  

• drm_for_each_plane(plane, dev) { plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) {

@@ -1442,6 +1447,10 @@ static int setcmap_atomic(struct fb_cmap *cmap, struct fb_info *info)

state->acquire_ctx = &ctx; retry:

• ret = drm_psr_helper_flush(dev, &ctx);
• if (ret)

• goto out_state;
  

• for (i = 0; i < fb_helper->crtc_count; i++) { crtc = fb_helper->crtc_info[i].mode_set.crtc;

diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c index d8d75e25f6fb..43b029a88578 100644 --- a/drivers/gpu/drm/drm_framebuffer.c +++ b/drivers/gpu/drm/drm_framebuffer.c @@ -27,6 +27,7 @@ #include <drm/drm_atomic.h> #include <drm/drm_atomic_uapi.h> #include <drm/drm_print.h> +#include <drm/drm_psr_helper.h> #include <drm/drm_util.h>

#include "drm_internal.h" @@ -572,6 +573,7 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, struct drm_clip_rect __user *clips_ptr; struct drm_clip_rect *clips = NULL; struct drm_mode_fb_dirty_cmd *r = data;

• struct drm_modeset_acquire_ctx ctx; struct drm_framebuffer *fb; unsigned flags; int num_clips;

@@ -580,10 +582,24 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP;

• drm_modeset_acquire_init(&ctx, 0);
• fb = drm_framebuffer_lookup(dev, file_priv, r->fb_id); if (!fb) return -ENOENT;

+retry:

• ret = drm_psr_helper_flush(fb->dev, &ctx);
• if (ret) {

• if (ret == -EDEADLK) {
  

• 	ret = drm_modeset_backoff(&ctx);
  

• 	if (!ret)
  

• 		goto retry;
  

• } else {
  

• 	goto out_err1;
  

• }
  

• }
• num_clips = r->num_clips; clips_ptr = (struct drm_clip_rect __user *)(unsigned long)r-

...

clips_ptr;

@@ -630,6 +646,8 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, kfree(clips); out_err1: drm_framebuffer_put(fb);

• drm_modeset_drop_locks(&ctx);

• drm_modeset_acquire_fini(&ctx);

  return ret;

} diff --git a/drivers/gpu/drm/drm_psr_helper.c b/drivers/gpu/drm/drm_psr_helper.c new file mode 100644 index 000000000000..0b57a2a53075 --- /dev/null +++ b/drivers/gpu/drm/drm_psr_helper.c @@ -0,0 +1,343 @@ +/* SPDX-License-Identifier: MIT */ +/*

• • Copyright (C) 2019 Google, Inc.
• • Authors:
• • Sean Paul seanpaul@chromium.org
• */

+#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_connector.h> +#include <drm/drm_device.h> +#include <drm/drm_mode_config.h> +#include <drm/drm_modeset_lock.h> +#include <drm/drm_print.h> +#include <drm/drm_psr_helper.h> +#include <linux/bitops.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/workqueue.h>

+/**

• • DOC: overview
• • This helper library provides an easy way for drivers to leverage

the atomic

• • framework to implement panel self refresh (PSR) support. Drivers

are

• • responsible for intializing and cleaning up the PSR helpers on

load/unload.

• • When drivers identify a display that supports self refreshing

(eDP or MIPI

• • command mode), it should register the affected connector with the

PSR

• • helpers.
• • Once a connector is registered, the PSR helpers will monitor

activity and

• • call back into the driver to enable/disable PSR as appropriate.

The best way

• • to think about this is that it's a DPMS on/off request with a

flag set in

• • state that tells you to disable/enable PSR on the panel instead

of power-

• • cycling it.
• • Drivers may choose to fully disable their crtc/encoder/bridge

hardware, or

• • they can use the "psr_transition" flag in crtc and connector

state if they

• • want to enter low power mode without full disable (in case full
• • disable/enable is too slow).
• • PSR will be deactivated if there are any atomic updates, even

updates that do

• • not affect the connectors which are self refreshing. Supporting

this is

• • possible but non-trivial due to sharing of hardware resources.

Similarly, if

• • a crtc is driving multiple connectors, PSR will not be initiated

on any of

• • those connectors.
• */

+struct drm_psr_state {

• struct drm_device *dev;
• struct drm_modeset_lock mutex;
• struct delayed_work entry_work;
• struct drm_atomic_state *save_state;
• unsigned int entry_delay_ms;

+};

+static void drm_psr_helper_entry_work(struct work_struct *work) +{

• struct drm_psr_state *psr_state =

container_of(to_delayed_work(work),

• 				       struct
  

drm_psr_state,

• 				       entry_work);
  

• struct drm_atomic_state *save_state;
• struct drm_device *dev = psr_state->dev;
• struct drm_modeset_acquire_ctx ctx;
• struct drm_atomic_state *state;
• struct drm_connector *conn;
• struct drm_connector_list_iter conn_iter;
• struct drm_connector_state *conn_state;
• struct drm_crtc *crtc;
• struct drm_crtc_state *crtc_state;
• bool commit = false;
• int ret, i;
• DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret);
• ret = drm_modeset_lock(&psr_state->mutex, &ctx);
• if (ret)

• goto out;
  

• /*

• * The only way this can happen is if we schedule the worker
  

while it's

• * already running and that timeout subsequently elapses. Since
  

we hold

• * the psr_state->mutex when scheduling, we also know where the
  

worker

• * is sitting in its execution (hint: look up). In this case,
  

it's

• * possible for the entry worker to run twice for the same
  

commit. Since

• * the hardware hasn't changed since the last save state, just
  

kick out.

• */
  

• if (psr_state->save_state)

• goto out;
  

• state = drm_atomic_state_alloc(dev);
• if (!state) {

• ret = -ENOMEM;
  

• goto out;
  

• }
• save_state = drm_atomic_helper_duplicate_state(dev, &ctx);
• /*

• * Now that we have the current the HW state saved, we have to
  

flip the

• * psr_transition bit so we know what type of enable we're
  

dealing with

• * when coming back on.
  

• *
  

• * NOTE: We don't check conn->capable here since that could
  

change out

• * from under us. We'll trust the atomic core to only call
  

enable if

• * necessary (ie: only for those connectors/crtcs that
  

currently have

• * psr enabled).
  

• */
  

• if (IS_ERR(save_state)) {

• ret = PTR_ERR(save_state);
  

• goto out;
  

• }
• for_each_new_connector_in_state(save_state, conn, conn_state,

i) {

• if (!conn_state->crtc)
  

• 	continue;
  

• conn_state->psr_transition = true;
  

• }
• for_each_new_crtc_in_state(save_state, crtc, crtc_state, i) {

• if (!crtc_state->active)
  

• 	continue;
  

• crtc_state->psr_transition = true;
  

• }
• state->acquire_ctx = &ctx;
• drm_connector_list_iter_begin(psr_state->dev, &conn_iter);
• drm_for_each_connector_iter(conn, &conn_iter) {

• if (!conn->psr_capable)
  

• 	continue;
  

• conn_state = drm_atomic_get_connector_state(state,
  

conn);

• if (IS_ERR(conn_state)) {
  

• 	ret = PTR_ERR(conn_state);
  

• 	drm_connector_list_iter_end(&conn_iter);
  

• 	goto out_free_state;
  

• }
  

• if (!conn_state->crtc)
  

• 	continue;
  

• crtc_state = drm_atomic_get_crtc_state(state,
  

conn_state->crtc);

• if (IS_ERR(crtc_state)) {
  

• 	ret = PTR_ERR(crtc_state);
  

• 	drm_connector_list_iter_end(&conn_iter);
  

• 	goto out_free_state;
  

• }
  

• /* Don't use PSR if the crtc is driving multiple
  

connectors */

• if (hweight_long(crtc_state->connector_mask) > 1)
  

• 	continue;
  

• commit = true;
  

• crtc_state->active = false;
  

• crtc_state->psr_transition = true;
  

• conn_state->psr_transition = true;
  

• }
• drm_connector_list_iter_end(&conn_iter);
• /* Nothing to commit, so just exit */
• if (!commit)

• goto out_free_state;
  

• ret = drm_atomic_commit(state);
• if (ret)

• goto out_free_state;
  

• psr_state->save_state = save_state;
• goto out;

+out_free_state:

• drm_atomic_state_put(save_state);
• drm_atomic_state_put(state);

+out:

• DRM_MODESET_LOCK_ALL_END(ctx, ret);

+}

+static int +drm_psr_helper_acquire_modeset_locks(struct drm_atomic_state *state,

• 		     struct drm_modeset_acquire_ctx
  

*ctx) +{

• struct drm_mode_config *config = &state->dev->mode_config;
• struct drm_crtc *crtc;
• struct drm_crtc_state *new_crtc_state;
• struct drm_plane *plane;
• struct drm_plane_state *new_plane_state;
• int ret, i;
• ret = drm_modeset_lock(&config->connection_mutex, ctx);
• if (ret)

• return ret;
  

• for_each_new_plane_in_state(state, plane, new_plane_state, i) {

• ret = drm_modeset_lock(&plane->mutex, ctx);
  

• if (ret)
  

• 	return ret;
  

• }
• for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {

• ret = drm_modeset_lock(&crtc->mutex, ctx);
  

• if (ret)
  

• 	return ret;
  

• }
• return 0;

+}

+/**

• • drm_psr_helper_flush - Restore the hardware to pre-PSR state
• • @dev: DRM device
• • @ctx: An acquire context to use for restoring the state
• • This function should be called before every drm_atomic_commit to

ensure any

• • connectors that are currently self-refreshing revert back to

being bus

• • driven. Drivers may call this function outside of the atomic

hooks if

• • they wish to disable PSR pre-emptively (such as upon an input

event or when

• • GPU becomes active).
• • If everything is successful, this function will schedule the PSR

entry worker

• • to enable PSR after the driver-specified timeout.
• • If the PSR helper is not being used, this is a no-op.
• */

+int drm_psr_helper_flush(struct drm_device *dev,

• 	 struct drm_modeset_acquire_ctx *ctx)
  

+{

• struct drm_mode_config *config = &dev->mode_config;
• struct drm_psr_state *psr_state = config->psr_state;
• int ret;
• if (!psr_state)

• return 0;
  

• ret = drm_modeset_lock(&psr_state->mutex, ctx);
• if (ret)

• return ret;
  

• if (!psr_state->save_state)

• goto out;
  

• ret = drm_psr_helper_acquire_modeset_locks(psr_state-

...

save_state, ctx);

• if (ret)

• goto out;
  

• ret = drm_atomic_helper_commit_duplicated_state(psr_state-

...

save_state,

• 					ctx);
  

+out:

• psr_state->save_state = NULL;
• if (!ret) {

• mod_delayed_work(system_wq, &psr_state->entry_work,
  

• 		 msecs_to_jiffies(psr_state-
  

...

entry_delay_ms));

• }
• return ret;

+} +EXPORT_SYMBOL(drm_psr_helper_flush);

+/**

• • drm_psr_helper_register - Registers a connector with the PSR

helpers

• • @connector: the connector which has a PSR-supported display

attached

• • Note that this can be called once on initialization for fixed

panels, or

• • during enable/hotplug.
• */

+int drm_psr_helper_register(struct drm_connector *connector) +{

• struct drm_mode_config *config = &connector->dev->mode_config;
• struct drm_psr_state *psr_state = config->psr_state;
• /* PSR helpers are uninitialized */
• if (WARN_ON(!psr_state))

• return -EINVAL;
  

• /* Acquired via psr_helper_flush */
• if (!drm_modeset_is_locked(&psr_state->mutex))

• return -EINVAL;
  

• connector->psr_capable = true;
• return 0;

+} +EXPORT_SYMBOL(drm_psr_helper_register);

+/**

• • drm_psr_helper_unregister - Unregisters a connector with the PSR

helpers

• • @connector: the connector to unregister
• */

+int drm_psr_helper_unregister(struct drm_connector *connector) +{

• struct drm_mode_config *config = &connector->dev->mode_config;
• struct drm_psr_state *psr_state = config->psr_state;
• /* PSR helpers are uninitialized */
• if (WARN_ON(!psr_state))

• return -EINVAL;
  

• /* Acquired via psr_helper_flush */
• if (!drm_modeset_is_locked(&psr_state->mutex))

• return -EINVAL;
  

• connector->psr_capable = false;
• return 0;

+} +EXPORT_SYMBOL(drm_psr_helper_unregister);

+/**

• • drm_psr_helper_init - Initializes the PSR helpers
• • @dev: DRM device
• • @entry_delay_ms: The amount of time to wait after an atomic

commit before

• •     activating PSR
    

• • Drivers using the PSR helpers must call this some time after

mode_config

• • is initialized in order to make use of the PSR helpers. Typically
• • entry_delay_ms is a function of how quickly the hardware can

enter/exit PSR.

• */

+int drm_psr_helper_init(struct drm_device *dev, unsigned int entry_delay_ms) +{

• struct drm_mode_config *config = &dev->mode_config;
• struct drm_psr_state *psr_state;
• psr_state = kzalloc(sizeof(*psr_state), GFP_KERNEL);
• if (!psr_state)

• return -ENOMEM;
  

• INIT_DELAYED_WORK(&psr_state->entry_work,

drm_psr_helper_entry_work);

• drm_modeset_lock_init(&psr_state->mutex);
• psr_state->dev = dev;
• psr_state->entry_delay_ms = entry_delay_ms;
• config->psr_state = psr_state;
• return 0;

+} +EXPORT_SYMBOL(drm_psr_helper_init);

+/**

• • drm_psr_helper_cleanup - De-initializes the PSR helpers
• • @dev: DRM device
• */

+void drm_psr_helper_cleanup(struct drm_device *dev) +{

• struct drm_mode_config *config = &dev->mode_config;
• cancel_delayed_work_sync(&config->psr_state->entry_work);
• kfree(config->psr_state);
• config->psr_state = NULL;

+} +EXPORT_SYMBOL(drm_psr_helper_cleanup); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index c8061992d6cb..9612b3d56f30 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -501,6 +501,17 @@ struct drm_connector_state { /** @tv: TV connector state */ struct drm_tv_connector_state tv;

• /**

• * @psr_transition:
  

• *
  

• * Used by the PSR helpers to denote when a PSR transition is
  

occuring.

• * If your connector is PSR-capable, register it with the
  

helpers and

• * check this flag in .enable() and .disable(). If it is true,
  

instead

• * of shutting off the panel, put it in or take it out of self
  

• * refreshing mode.
  

• */
  

• bool psr_transition;
• /**
  • @picture_aspect_ratio: Connector property to control the
  • HDMI infoframe aspect ratio setting.

@@ -993,6 +1004,17 @@ struct drm_connector { */ struct drm_display_info display_info;

• /**

• * @psr_capable:
  

• *
  

• * Set by the driver via drm_psr_helper_register(). Signals
  

that this

• * connector (and associated pipe) is PSR capable and should be
  

put in

• * low-power mode when it is inactive.
  

• *
  

• * Protected by &drm_mode_config.psr_state.mutex
  

• */
  

• bool psr_capable;
• /** @funcs: connector control functions */ const struct drm_connector_funcs *funcs;

diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index f7c3022dbdf4..10acd4fc0991 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -299,6 +299,17 @@ struct drm_crtc_state { */ bool vrr_enabled;

• /**

• * @psr_transition:
  

• *
  

• * Used by the PSR helpers to denote when a PSR transition is
  

occuring.

• * This will be set on enable/disable callbacks when PSR is
  

being

• * enabled or disabled. In some cases, it may not be desirable
  

to fully

• * shut off the crtc during PSR. CRTC's can inspect this flag
  

and

• * determine the best course of action.
  

• */
  

• bool psr_transition;
• /**
  • @event:

diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 7f60e8eb269a..371b80d090ab 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -37,6 +37,7 @@ struct drm_atomic_state; struct drm_mode_fb_cmd2; struct drm_format_info; struct drm_display_mode; +struct drm_psr_state;

/**

• struct drm_mode_config_funcs - basic driver provided mode setting

functions @@ -900,6 +901,11 @@ struct drm_mode_config { */ struct drm_atomic_state *suspend_state;

• /**

• * @psr_state: Holds the state for the psr helper
  

• */
  

• struct drm_psr_state *psr_state;
• const struct drm_mode_config_helper_funcs *helper_private;

};

diff --git a/include/drm/drm_psr_helper.h b/include/drm/drm_psr_helper.h new file mode 100644 index 000000000000..972c4ec98d05 --- /dev/null +++ b/include/drm/drm_psr_helper.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: MIT */ +/*

• • Copyright (C) 2019 Google, Inc.
• • Authors:
• • Sean Paul seanpaul@chromium.org
• */

+#ifndef DRM_PSR_HELPER_H_ +#define DRM_PSR_HELPER_H_

+struct drm_connector; +struct drm_device; +struct drm_psr_state; +struct drm_modeset_acquire_ctx;

+int drm_psr_helper_flush(struct drm_device *dev,

• 	 struct drm_modeset_acquire_ctx *ctx);
  

+int drm_psr_helper_register(struct drm_connector *connector); +int drm_psr_helper_unregister(struct drm_connector *connector);

+int drm_psr_helper_init(struct drm_device *dev, unsigned int entry_delay_ms); +void drm_psr_helper_cleanup(struct drm_device *dev); +#endif