This patch adds documentation of device tree bindings for the STM32 DSI controller based on the Synopsys DesignWare MIPI DSI host controller.
Signed-off-by: Philippe CORNU philippe.cornu@st.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Acked-by: Rob Herring robh@kernel.org --- .../devicetree/bindings/display/st,stm32-ltdc.txt | 104 ++++++++++++++++++++- 1 file changed, 103 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt index 90a8459..74b5ac7 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -12,8 +12,40 @@ Required nodes: - Video port for RGB output.
-Example: +* STMicroelectronics STM32 DSI controller specific extensions to Synopsys + DesignWare MIPI DSI host controller
+The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI +DSI host controller. For all mandatory properties & nodes, please refer +to the related documentation in [5]. + +Mandatory properties specific to STM32 DSI: +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. +- compatible: "st,stm32-dsi". +- clock-names: + - phy pll reference clock string name, must be "ref". +- resets: see [5]. +- reset-names: see [5]. + +Mandatory nodes specific to STM32 DSI: +- ports: A node containing DSI input & output port nodes with endpoint + definitions as documented in [3] & [4]. + - port@0: DSI input port node, connected to the ltdc rgb output port. + - port@1: DSI output port node, connected to a panel or a bridge input port. +- panel or bridge node: A node containing the panel or bridge description as + documented in [6]. + - port: panel or bridge port node, connected to the DSI output port (port@1). + +Note: You can find more documentation in the following references +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/reset/reset.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/graph.txt +[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt +[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt + +Example 1: RGB panel / { ... soc { @@ -33,3 +65,73 @@ Example: }; }; }; + +Example 2: DSI panel + +/ { + ... + soc { + ... + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + + + dsi: dsi@40016c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-dsi"; + reg = <0x40016c00 0x800>; + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; + clock-names = "ref", "pclk"; + resets = <&rcc STM32F4_APB2_RESET(DSI)>; + reset-names = "apb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_in_panel>; + }; + }; + + }; + + panel-dsi@0 { + reg = <0>; /* dsi virtual channel (0..3) */ + compatible = ...; + enable-gpios = ...; + + port { + dsi_in_panel: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + }; + + }; + + }; +};