On Wed, Sep 24, 2014 at 11:04:32PM +0300, Laurent Pinchart wrote:
Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector and configure the DISP pin group that drives the HDMI transmitter DE pin.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
Acked-by: Simon Horman horms+renesas@verge.net.au
Please be careful of any conflicts that may arise if this patch doesn't go through my renesas tree.
arch/arm/boot/dts/r8a7791-koelsch.dts | 50 ++++++++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 9051e01..b7d0c41 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -209,6 +209,17 @@ states = <3300000 1 1800000 0>; };
- hdmi-out {
compatible = "hdmi-connector";type = "a";port {hdmi_con: endpoint {remote-endpoint = <&adv7511_out>;};};- };
};
&du { @@ -217,6 +228,11 @@ status = "okay";
ports {
port@0 {endpoint {remote-endpoint = <&adv7511_in>;};};@@ -235,7 +251,7 @@ };
du_pins: du {
renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";@@ -439,6 +455,38 @@ }; };
- hdmi@39 {
compatible = "adi,adv7511w";reg = <0x39>;interrupt-parent = <&gpio3>;interrupts = <29 IRQ_TYPE_EDGE_FALLING>;adi,input-depth = <8>;adi,input-colorspace = "rgb";adi,input-clock = "1x";adi,input-style = <1>;adi,input-justification = "evenly";ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;adv7511_in: endpoint {remote-endpoint = <&du_out_rgb>;};};port@1 {reg = <1>;adv7511_out: endpoint {remote-endpoint = <&hdmi_con>;};};};- };
- eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>;
-- 1.8.5.5
-- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html