Hi, Guillaume:
On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
From: Markus Schneider-Pargmann msp@baylibre.com
This patch adds a DisplayPort driver for the Mediatek mt8195 SoC.
It supports the mt8195, the embedded DisplayPort units. It offers DisplayPort 1.4 with up to 4 lanes.
The driver creates a child device for the phy. The child device will never exist without the parent being active. As they are sharing a register range, the parent passes a regmap pointer to the child so that both can work with the same register range. The phy driver sets device data that is read by the parent to get the phy device that can be used to control the phy properties.
This driver is based on an initial version by Jason-JH.Lin jason-jh.lin@mediatek.com.
Signed-off-by: Markus Schneider-Pargmann msp@baylibre.com Signed-off-by: Guillaume Ranquet granquet@baylibre.com
[snip]
+static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
I don't have a DP spec. I find one in [1] but I'm not sure it's real spec or not. If it's real, in section 3.1.3.2, it describe:
3.1.3.2 Hot Plug/Unplug Detection One signal (HPD) is used by a device (an Upstream device) to detect that a Downstream port on the device has been connected to another device (the Downstream device). Implementation of HPD is optional for an embedded link configuration. At least a “trickle power” must be present both in the Upstream and Downstream devices for a Hot Plug event to be detected.
I focus on the statement "Implementation of HPD is optional for an embedded link configuration". I'm not sure what does 'optional' mean. Does it mean eDP panel without HPD signal is possible? If so, I think driver should support eDP panel without HPD signal. Maybe I misunderstanding this spec. Please explain for me.
Regards, CK
[1] https://glenwing.github.io/docs/DP-1.2.pdf
+{
- struct mtk_dp *mtk_dp = dev;
- int event;
- u8 buf[DP_RECEIVER_CAP_SIZE] = {};
- event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected
:
connector_status_disconnected;
- if (event < 0)
return IRQ_HANDLED;- if (mtk_dp->drm_dev) {
dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n");drm_helper_hpd_irq_event(mtk_dp->bridge.dev);- }
- if (mtk_dp->train_info.cable_state_change) {
mtk_dp->train_info.cable_state_change = false;mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP;if (!mtk_dp->train_info.cable_plugged_in ||!mtk_dp_plug_state(mtk_dp)) {mtk_dp_video_mute(mtk_dp, true);mtk_dp_initialize_priv_data(mtk_dp);mtk_dp_set_idle_pattern(mtk_dp, true);if (mtk_dp->has_fec)mtk_dp_fec_enable(mtk_dp, false);mtk_dp_update_bits(mtk_dp,MTK_DP_TOP_PWR_STATE,
DP_PWR_STATE_BANDGAP_TPLL,DP_PWR_STATE_MASK);} else {mtk_dp_update_bits(mtk_dp,MTK_DP_TOP_PWR_STATE,
DP_PWR_STATE_BANDGAP_TPLL_LANE,
DP_PWR_STATE_MASK);drm_dp_read_dpcd_caps(&mtk_dp->aux, buf);mtk_dp->train_info.link_rate =min_t(int, mtk_dp->max_linkrate,buf[mtk_dp->max_linkrate]);mtk_dp->train_info.lane_count =min_t(int, mtk_dp->max_lanes,drm_dp_max_lane_count(buf));}- }
- if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) {
dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT;mtk_dp_hpd_sink_event(mtk_dp);- }
- return IRQ_HANDLED;
+}