On Tue, Nov 26, 2013 at 1:13 AM, Alexandre Demers alexandre.f.demers@gmail.com wrote:
While working on a dpm bug (https://bugs.freedesktop.org/show_bug.cgi?id=69723), I stumbled upon a couple of lines in NI dpm where we were reading and setting back the same values for no obvious reason. Simplified the logic.
This patch creates some unused variable warnings. While fixing them up, I found the logic could be further cleaned up. See attached.
Alex
Signed-off-by: Alexandre Demers alexandre.f.demers@gmail.com
drivers/gpu/drm/radeon/ni_dpm.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c index f263390..2a10bbe 100644 --- a/drivers/gpu/drm/radeon/ni_dpm.c +++ b/drivers/gpu/drm/radeon/ni_dpm.c @@ -841,21 +841,12 @@ static void ni_apply_state_adjust_rules(struct radeon_device *rdev,
if (disable_mclk_switching) { mclk = ps->performance_levels[ps->performance_level_count - 1].mclk;
sclk = ps->performance_levels[0].sclk;vddc = ps->performance_levels[0].vddc; vddci = ps->performance_levels[ps->performance_level_count - 1].vddci;} else {sclk = ps->performance_levels[0].sclk;mclk = ps->performance_levels[0].mclk;vddc = ps->performance_levels[0].vddc;vddci = ps->performance_levels[0].vddci;}/* adjusted low state */ps->performance_levels[0].sclk = sclk;ps->performance_levels[0].mclk = mclk;ps->performance_levels[0].vddc = vddc;ps->performance_levels[0].vddci = vddci;
/* adjusted low state */ps->performance_levels[0].mclk = mclk;ps->performance_levels[0].vddci = vddci;} btc_skip_blacklist_clocks(rdev, max_limits->sclk, max_limits->mclk, &ps->performance_levels[0].sclk,-- 1.8.4